Title Page
-
This electrical safety check is for electrical safety purposes only and is in accordance with requirements of the Residential Tenancies Regulations 2021 and is prepared in accordance with section 2 of the Australian/New Zealand Standard AS/NZS 3019, Electrical installation - Periodic verification to confirm that the installation is not damaged or has not deteriorated so as to impair electrical safety; and to identify installation defects and departures from the requirements that may give rise to danger.
-
Installation address:
-
Date of previous safety check: (if any)
A. Location of existing installations
-
Details of those parts of the installation and limitations of the safety check covered by this certificate, "Yes" parts of the installation that is included in the safety check - "N/A" parts of the installation if not included in the safety check - add additional information if required.
-
Main earth system
-
Kitchen
-
Bathroom (main)
-
Other bathrooms/ensuites
-
Bedroom (main)
-
Other bedrooms
-
Living room
-
Other living areas
-
Laundry
-
Garage
-
Electric water heater
-
Dishwasher
-
Electric room/space heaters
-
Solar/battery system
-
Swimming pool/equipment
-
Vehicle chargers
B. Safety check - verified by visual & Testing
-
As far as practical a VISUAL INSPECTION AND TESTING of the following items has been carried out as per the requirements of section 3 and 4 of the Australian/New Zealand Standard AS/NZS 3019:2007 Electrical installations - Periodic Verification: "Compliant" parts of the installation that is included in the safety check - "N/A" parts of the installation if not included in the safety check - add additional information if required.
-
Consumers mains
-
Switchboards
-
Exposed earth electrode
-
Metallic water pipe bond
-
RCDs (safety switches) & push button test
-
Circuit protection (circuit breakers/fuses)
-
Socket-outlets
-
Light fittings
-
Switches
-
Electric water heater
-
Air conditioners
-
Space heaters
-
Cooking equipments
-
Dishwasher
-
Exhaust fans
-
Ceiling fans
-
Installation wiring
-
Solar and other renewable systems
-
Swimming pool equipment
-
Vehicle chargers
C. Smoke Alarms
-
All smoke alarms are correctly installed and in working condition; and have been tested according to the manufacturer's instructions?
-
All smoke alarms must be tested according to the manufacturer's instructions at least once every 12 months.
D. Electrical Safety Check Certification
-
Electrical safety check completed by:
-
Inspection conducted on
-
License/REC:
-
I the above named license electrician have carried out an electrical safety check of this residential tenancies per the requirements of Residential Tenancies Regulations 2021 and set out in the Australian/New Zealand Standard AS/NZS 3019, "Electrical installations - Periodic verification, and have recorded my observations and recommendations.