Information

  • Site

  • Location
  • Conducted on

  • Prepared by

  • Personnel present

  • Electricity safety is part of induction

  • People working with electricity have been given information, instruction and training

  • Electrical danger poster displayed

  • Correct extinguishers on site

  • RCDs are installed at switchboards or into fixed sockets

  • Portable electrical equipment is protected by RCDs

  • The RCD device is labelled and has been tested

  • Flexible cord extensions have ether moulded or transparent type plugs

  • Plugs, sockets and extension leads are in good condition

  • Flexible cords are protected from water, being damaged or being cut

  • Switchboards are labelled correctly and protected from damage

  • Light fittings are suitable for the location and protected from breakage

  • Power points are suitable for the location and are positioned safely

  • Permanent live boards are lockable

  • Temporary power box tagged and numbered

  • Power to temporary power box is tagged

  • Covers and leads through the bottom of the box

  • Insulated tie bars in place

  • Safety procedures are in place for workers working near overhead power lines

  • Machinery has been identified that may expose workers to electrical risk

  • Permit provided to work near overhead power lines or underground services

  • Proof of Dial Before You Dig and/or scanning reports are available on site

  • Site power been connected when construction site work has reached plate height

  • Cords are of suitable length for the intended use

  • Power located within 30 metres of work area (no piggy backing)

  • There are no double adapters or 3 pin plug adapters in use

  • Electrical installations are protected from damage that would increase the risk of electrical shock or fire

  • Electrical leads raised off ground by at least 2m - Portable cable stands are used when required

  • Portable electrical equipment has been tested and tagged

  • There is a record of testing i.e. electrical register

  • All final sub-circuits, socket outlets, portable generators and equipment are protected by RCDs

  • No aerial cables are fixed or attached to scaffolding

  • Are aerial cables across walkways flagged

  • Correct step ladders used for electrical work

  • Isolation permits and isolation log in place

Corrective Actions

    Corrective Actions
  • Description

  • Add media

  • Risk Rating

  • Action by

  • Date completed

  • Completed sign off

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.