Title Page
-
Employee Name
-
Site Conducted
-
Conducted on
-
Prepared by
-
Work Description
-
Duration of Works
IDENTIFICATION & UNIFORM
-
Does the employee have a company I.D card?
-
Is the employee wearing company specified uniform?
-
Is the uniform in good condition and presentable?
-
Are safety boots / shoes being worn?
-
Does the engineer hold an ECS card?
SITE INDUCTION & SIGN IN
-
Signed in on site?
-
Has a site induction been completed?
-
Where applicable are site passes or permits to work in place?
-
If the engineer is Lone Working have they made arrangements to maintain regular contact with a site representative?
-
Asbestos Register reviewed where relevant?
-
Is the engineer UKATA Asbestos Awareness trained?
-
Does the engineer know what procedure to follow if Asbestos is confirmed or suspected in the work area(s)?
WORK INSTRUCTION
-
Has the engineer received sufficient work instruction?
-
Does the engineer understand what is required as part of the works? (i.e task, specification, method,equipment & tools needed etc)
-
Are they aware of the Manager in charge of the works?
-
Clothing changing area available where required?
RISK ASSESSMENT, METHOD STATEMENTS & PERMITS TO WORK
-
Does the engineer have access to a set of RAMS for the work / task being undertaken? (incl equipment, COSHH etc)
-
Are the RAMS in date?
-
Has the engineer reviewed & acknowledged the RAMS?
-
Has a Point of Work Risk Assessment been completed on Joblogic?
-
Is the engineer aware of the hazards associated with the task / job?
-
Is the engineer able to suitably control the hazards identified?
-
Are the recorded control measures being applied?
-
Does the engineer have access to applicable Safe Systems of Work / Safe Working Procedures?
-
If applicable, has a permit to work been completed and validated by an authorised person?
-
Rate the engineers understanding of hazards and control measures?
ACCESS & HOUSEKEEPING
-
Can the engineer access the work area(s) safely?
-
Lighting in the work area adequate?
-
Is the work area adequately controlled / segregated to prevent unauthorised access to third parties incl MOP?
-
Are all nuisances being adequately controlled i.e. dust, noise?
-
Is the work area tidy and are materials, tools & equipment stored safely to prevent slip, trip and fall hazards?
-
Are all waste materials being disposed of in an approved waste receptacle?
EMERGENCY PREPAREDNESS
-
Is the engineer aware of the sites evacuation plan & muster points?
-
Are fire exits clearly signed and free from obstruction?
-
Is the engineer able to raise the alarm in the event of a fire?
-
Fire Extinguisher(s) present in or around the work area?
-
Are flammable & combustible materials & liquids stored away from ignition?
-
Is the engineer trained in Fire Safety Awareness?
-
Does the work site have suitable provision for First Aid incl Appointed First Aiders, First Aid procedures, First Aid supplies etc?
-
Is the engineer trained in Emergency First Aid at Work?
-
Company mobile phone accessible for use in the event of an emergency?
PPE
-
PPE Bag
-
Safety Boots
-
Hard Hat
-
Manufacture Date
-
Bump Cap
-
Manufacture Date
-
Hi-Vis Vest
-
Safety Glasses / Safety Goggles
-
Ear Defenders / Foam Ear Plugs
-
Stanley Gripper Gloves
-
Disposable Gloves
-
Lvl 5 Cutmaster Gloves
-
Knee Pads / Kneeling Pad
-
Disposable RPE (FFP1, FFP2, FFP3)
-
1000v Class 0 Electrical Gauntlets
-
Manufacture Date
-
First Aid Kit
-
Vehicle Fire Extinguisher
-
A-Frame Warning Sign 'Works in Progress'
-
Winter Coat
-
Fall Restraint Safety Harness & Lanyard
-
Has the Fall Restraint Safety Harness & Lanyard been subject to inspection within the last 6 months?
-
Are there any other items of PPE available?
-
Is all PPE in good condition & stored safely to prevent damage?
-
Is the engineer aware of the requirement to maintain PPE, undertake pre-use inspections and the procedure to be followed to replace PPE?
-
Does the engineer have access to the necessary PPE required for the task / job today?
-
PPE training undertaken?
TOOLS & EQUIPMENT
-
Multimeter
-
Fluke Digital Clamp Meter
-
Two probe voltage indicator
-
Proving Unit
-
Lock Off Kit
-
Multifunction Tester
-
Has the MFT got valid calibration date?
-
GS38 Compliant Test Leads
-
Electrical Insulated Hand Tools VDE1000
-
Battery Operated Floodlight
-
Socket Set
-
Battery Operated Drill(s), Grinder, Reciprocating Saw
- Yes
- No
- N/A
-
Extension Reel
-
RCD Plug
-
List any other company owned tools & equipment that the engineer has?
-
Are tools & equipment in good condition & stored safely and securely?
-
Are all portable appliances PAT tested and do they have valid labels in place?
LADDERS & STEPLADDERS
-
Do ladders & stepladders conform to EN:131?
-
Are stepladders constructed of fibreglass?
-
If in use are the ladders / stepladders positioned correctly, and where necessary secured to prevent unwanted movement?
-
Do the ladders / stepladders have asset numbers on?
-
Is a valid ladder tag on the equipment showing inspection within the last 3 months?
Vehicle
-
Is the engineers vehicle parked safely in a designated parking area?
-
Does the engineer complete weekly documented vehicle inspections?
-
Is the vehicle clean & tidy with tools and equipment stored safely?
-
Is the driver aware of guidance relating to driving rest breaks? (15 mins every 2 hrs)
-
Any current issues with the vehicle ?
MOBILE ELEVATED WORK PLATFORMS
-
Does the engineer hold valid IPAF training for the category of equipment being operated?
-
Is the equipment suitable for the works being undertaken in terms of height, reach, ground type etc?
-
Is there evidence available to confirm that the equipment has been subject to a LOLER inspection within the last 6 months?
-
Has the MEWP been subject to a documented pre-use inspection at the start of the shift or upon change of operator?(MEWP Pre-Use Checklist to be evidenced)
-
Is a Rescue Plan in place?
-
Two operatives assigned to the task?
-
Have precautions been taken to prevent the equipment from being struck by vehicles?
-
Has a suitable area surrounding the equipment been cordoned off to prevent unauthorised access by third parties incl MOP?
-
Fall restraint safety harness & lanyard being used & worn?
-
Anemometer available to check windspeed?
-
Can the MEWP be parked and stored safely on site?
MOBILE ACCESS TOWER
-
Does the engineer hold valid PASMA training?
-
Has the Mobile Tower been inspected prior to use? (Mobile Tower Inspection Checklist to be evidenced)
-
Is the tower erected on firm, level and stable ground?
-
Is the equipment suitable for the works being undertaken
MANUAL HANDLING
-
Are mechanical aids or lifting straps provided where necessary? If used are they suitable for the task?
-
Has the engineer completed Manual Handling training?
COSHH
-
Are COSHH assessments available for each hazardous substance the employee uses?
-
Are MSDS available for the hazardous substances?
-
Does the engineer have all hazardous substances & chemicals stored correctly?
ACCIDENT, NEAR MISS & HAZARD REPORTING
-
Does the engineer know the company's Accident Reporting procedure?
-
Does the engineer understand the company's Hazard & Near Miss reporting procedure?
-
Has the engineer got the WhatsApp reporting group set up on his phone for reporting Hazards & Near Misses?
-
Does the engineer understand their legal responsibility to report Accidents?
EMPLOYEE H&S CONSULTATION
-
Does the engineer feel that they are consulted on, or supported with matters relating to health, safety & wellbeing?
-
Has an up to date copy of the Employee H&S Handbook and Drivers Handbook been issued to the engineer?
-
Does the engineer have any concerns, questions, items to raise or suggestions for improvement relating to health & safety?
-
Is the engineer aware of the Employee Assistance Programme?
-
Is there any additional training that the engineer may require or indicates interest in?
Technical Audits
-
Has the engineer had a technical audit conducted by appointed technical manager(s) within the last 12 months?
UNSOLVED ISSUES /AOB
-
Are there any other issues identified that need corrective action or investigation as a result of the audit?