Facility Condition Assessment

• International School Partnership, UK

• Nibras School International, Dubai Investment Park

• Conducted on

  Date

• Jibin Antony

• Location
  Address

A10-FOUNDATIONS INSPECTION CHECK LIST

• SETTLEMENT & Alignment ISSUES

  Select Soil Changes in load bearing Shrinkage Erosion or compaction Adjacent construction issues Reduced soil cover resulting exposure Building equipment load vs Design load issues Vibration from building equipment Structural or occupancy changes Inadequate bearing capacity Foundation settling Earthquake resistance non functioning

  • Soil Changes in load bearing
  • Shrinkage
  • Erosion or compaction
  • Adjacent construction issues
  • Reduced soil cover resulting exposure
  • Building equipment load vs Design load issues
  • Vibration from building equipment
  • Structural or occupancy changes
  • Inadequate bearing capacity
  • Foundation settling
  • Earthquake resistance non functioning

• Add media

  Media

• MOISTURE PENETRATION

  Select Water table changes Inadequate drainage Ineffective drains/sump pumps/sump pits Roof drainage/storm sewer connections Roof drain restrictions/gutters/downspouts Surface drainage slope issues Utilities -broken or improper functioning Leakages- wall cracks/expansion, construction joints Inadequate or defective water proofing Condensation/inadequate ventilation Inadequate vapour barrier/dehumidification

  • Water table changes
  • Inadequate drainage
  • Ineffective drains/sump pumps/sump pits
  • Roof drainage/storm sewer connections
  • Roof drain restrictions/gutters/downspouts
  • Surface drainage slope issues
  • Utilities -broken or improper functioning
  • Leakages- wall cracks/expansion, construction joints
  • Inadequate or defective water proofing
  • Condensation/inadequate ventilation
  • Inadequate vapour barrier/dehumidification

• Add media

  Media

• TEMPERATURE CHANAGES

  Select Insulation issues improperly selected insulation values Fire rating Vermin resistance

  • Insulation issues
  • improperly selected insulation values
  • Fire rating
  • Vermin resistance

• Add media

  Media

• Surface Material Deteriorations

  Select Concrete/masonry/stucco/spalling Corrosion of reinforcing Moisture penetrations Chemical reaction Corrosion damage on steel or other ferrous materials Corrosion due to contact with acid bearing soils Wood decay due to moisture or insect infestation

  • Concrete/masonry/stucco/spalling
  • Corrosion of reinforcing
  • Moisture penetrations
  • Chemical reaction
  • Corrosion damage on steel or other ferrous materials
  • Corrosion due to contact with acid bearing soils
  • Wood decay due to moisture or insect infestation

• Add media

  Media

• OPENEINGS DETORIATION

  Select Non functioning of doors/windows/hatchways/stairways Utilities penetrations damage due to weather/wear Other damages

  • Non functioning of doors/windows/hatchways/stairways
  • Utilities penetrations damage due to weather/wear
  • Other damages

• Add media

  Media

• FLOORS, concrete Cracking or arching

  Select Shrinkage or settlement of subsoil Inadequate drainage movement in exterior walls Improper compaction of base Erosion of base Heaving from hydraulic pressure

  • Shrinkage or settlement of subsoil
  • Inadequate drainage
  • movement in exterior walls
  • Improper compaction of base
  • Erosion of base
  • Heaving from hydraulic pressure

• Add media

  Media

• Floors/Wood-Rotting or arching

  Select Excessive dampness Insect infestation Leak in building exterior Lack of ventilation

  • Excessive dampness
  • Insect infestation
  • Leak in building exterior
  • Lack of ventilation

• Add media

  Media

• CRAWL SPACE VENTILATION AND MAINTENANCE

  Select Inadequate air circulation due to blockage of openings in foundation walls Moisture barrier ineffective Pest control issues Poor house keeping Improper drainage

  • Inadequate air circulation due to blockage of openings in foundation walls
  • Moisture barrier ineffective
  • Pest control issues
  • Poor house keeping
  • Improper drainage

• Add media

  Media

B10-SUPERSTRUCTURE INSPECTION CHECK LIST (CONCRETE-COLUMNS,WALLS AND FLOOR AND ROOF SLABS)

• OVERALL ALINGMENT

  Select Settlement issues Design faualt Improper fabrication

  • Settlement issues
  • Design faualt
  • Improper fabrication

• Add media

  Media

• DEFELECTION

  Select Expansion issues Contraction issues

  • Expansion issues
  • Contraction issues

• Add media

  Media

• SURFACE CONDITIONS -CRACKS

  Select Inadequate design Changes in design loads Stress concentrations Extreme temperature changes

  • Inadequate design
  • Changes in design loads
  • Stress concentrations
  • Extreme temperature changes

• Add media

  Media

• SCALING, SPALLAS AND POP OUTS

  Select Extreme temperature changes Reinforcement corrossion Environmental conditions Mechanical damages Poor material

  • Extreme temperature changes
  • Reinforcement corrossion
  • Environmental conditions
  • Mechanical damages
  • Poor material

• Add media

  Media

• STAINS

  Select Chemical reaction of reinforcing Reaction of material in concrete mixture Environmental condition

  • Chemical reaction of reinforcing
  • Reaction of material in concrete mixture
  • Environmental condition

• Add media

  Media

• EXPOSED REINFORCING

  Select Corrosion of steel Insufficient cover Mechanical Damge

  • Corrosion of steel
  • Insufficient cover
  • Mechanical Damge

• Add media

  Media

• STEEL (STRUCTURAL MEMBERS, STAIRS AND CONNECTIONS)-OVER ALL ALINGMENT

  Select Settlement issues Design issues improper fabrication

  • Settlement issues
  • Design issues
  • improper fabrication

• Add media

  Media

• DEFLECTIONS OR CRACKING

  Select Expansion issues Contraction issues Changes in design loads Fatigue due to vibration or impact

  • Expansion issues
  • Contraction issues
  • Changes in design loads
  • Fatigue due to vibration or impact

• Add media

  Media

• CORROSION

  Select Electrochemical reaction Failure of protective coating Excessive moisture exposure

  • Electrochemical reaction
  • Failure of protective coating
  • Excessive moisture exposure

• Add media

  Media

• SURFACE DETERIORATION

  Select Excessive wear and tear

  • Excessive wear and tear

• Add media

  Media

• WOOD (STRUCTURAL MEMBERS AND CONNECTIONS) -OVER ALL ALINGNMENT

  Select settlement issues Design issues Construction issues

  • settlement issues
  • Design issues
  • Construction issues

• Add media

  Media

• DEFLECTION OR CRACKING

  Select Expansion issues Contraction issues Changes in design loads Fatigue due to vibration or impact Failure of compression members Poor construction General material failure

  • Expansion issues
  • Contraction issues
  • Changes in design loads
  • Fatigue due to vibration or impact
  • Failure of compression members
  • Poor construction
  • General material failure

• Add media

  Media

• Rot (Decay)

  Select Direct contact with moisture Condensation Omission or deterioration of vapor barrier Poor construction Damage from rodents or insects

  • Direct contact with moisture
  • Condensation
  • Omission or deterioration of vapor barrier
  • Poor construction
  • Damage from rodents or insects

• Add media

  Media

B20-EXTERIOR CLOSURE INSPECTION CHECK LIST 1. General Inspections 2. Overall apprearence 3. Displacement 4. Paint Condition 5. Caulking 6. Window and door fit 7. Flashing conditions 8. Material integrity 9. Cracks 10. Evidence of moisture 11. Construction Joints 12. Hardware condition

• General Inspection

  Select Yes No N/A

  • Yes
  • No
  • N/A

• Add media

  Media

• Exterior Walls

  Good

  Fair

  Poor

• Add media

  Media

• Wood (Shingles, weatherboard,sidings,plywood) Paint or surface treatment condition Rot or decay

  Select paint or surface treatnment conditions moisture pentration Rot or decay loose cracked, warped or broken boards and shingles

  • paint or surface treatnment conditions
  • moisture pentration
  • Rot or decay
  • loose cracked, warped or broken boards and shingles

• Add media

  Media

• Concrete, Masonry, and tiles (Concrete, bricks, concrete masonry units, structural tiles, glazed tiles,stucco,stone)

  Select settlement structural frame movement casing cracks construction and expansion joints condition of caulking and mortar surface deteriation efflorescence and staining parapet movement tighteness of fastners

  • settlement
  • structural frame movement casing cracks
  • construction and expansion joints
  • condition of caulking and mortar
  • surface deteriation
  • efflorescence and staining
  • parapet movement
  • tighteness of fastners

• Add media

  Media

• Metal (Corrugated iron or steel, aluminium,enamel coated steel,protected metals )

  Select settlement structural frame movement condition of bracing surface damage due to impact tighteness of fasteners caulking flashings corrossion

  • settlement
  • structural frame movement
  • condition of bracing
  • surface damage due to impact
  • tighteness of fasteners
  • caulking
  • flashings
  • corrossion

• Add media

  Media

• Finishes (mineral products,fiber glasses,polyester resins,and plastics)

  Select settlement structural frame movement surface damage due to impact cracks stains fastners adhesion to substrate caulking flashings lead paint asbestos products

  • settlement
  • structural frame movement
  • surface damage due to impact
  • cracks
  • stains
  • fastners
  • adhesion to substrate
  • caulking
  • flashings
  • lead paint
  • asbestos products

• Add media

  Media

• STAINS

  Select Yes No N/A

  • Yes
  • No
  • N/A

• Add media

  Media

• Insulation

  Select insulation present satisfactory condition

  • insulation present
  • satisfactory condition

• Add media

  Media

• Windows & Doors

  Select frame fitting frame and molding condition paint or surface finish putty and weather stripping hardware and operating parts security cleanliness material condition (glasses,wood,and metal panels) rot or corrossion screens and storm windows

  • frame fitting
  • frame and molding condition
  • paint or surface finish
  • putty and weather stripping
  • hardware and operating parts
  • security
  • cleanliness
  • material condition (glasses,wood,and metal panels)
  • rot or corrossion
  • screens and storm windows

• Add media

  Media

• Shading Device

  Select material condition operations cleanliness

  • material condition
  • operations
  • cleanliness

• Add media

  Media

B30-EXTERIOR CLOSURE INSPECTION CHECK LIST 1. General Inspections 2. Overall apprearence 3. Displacement 4. Paint Condition 5. Caulking 6. Window and door fit 7. Flashing conditions 8. Material integrity 9. Cracks 10. Evidence of moisture 11. Construction Joints 12. Hardware condition

• General Appearence

  Good

  Fair

  Poor

• Add media

  Media

• Water Tightness

  Select evidence of leaks on undersurfacs surface weathering faulty material faulty design faulty application standing water weather damage mechanical damage fastening failure flashing failure

  • evidence of leaks on undersurfacs
  • surface weathering
  • faulty material
  • faulty design
  • faulty application
  • standing water
  • weather damage
  • mechanical damage
  • fastening failure
  • flashing failure

• Add media

  Media

• Roofing Surface-Built up (felt or bitumen surfacing)

  Select Adhesion moisture meter reading bare areas Blisters,wrinkles cracks, holes,tears fish mouths alligatoring ballast

  • Adhesion
  • moisture meter reading
  • bare areas
  • Blisters,wrinkles
  • cracks, holes,tears
  • fish mouths
  • alligatoring
  • ballast

• Add media

  Media

• Single ply (Thermosetting, thermo plastic,composites)

  Select Adhesion moisture meter reading bare areas blisters, wrinkles cracks holes,tears seam conditions protective coating Ballast

  • Adhesion
  • moisture meter reading
  • bare areas
  • blisters, wrinkles
  • cracks
  • holes,tears
  • seam conditions
  • protective coating
  • Ballast

• Add media

  Media

• Metal roofing (preformed,formed)

  Select corrosion (%) protective coating seams cracks or breaks holes expansion joints

  • corrosion (%)
  • protective coating
  • seams
  • cracks or breaks
  • holes
  • expansion joints

• Add media

  Media

• Shingles & tiles (metal, clay, mission, concrete or others)

  Select disintegration broken or cracked (%) missing(%) fastners underlayment

  • disintegration
  • broken or cracked (%)
  • missing(%)
  • fastners
  • underlayment

• Add media

  Media

• Wood shingles

  Select Yes No N/A

  • Yes
  • No
  • N/A

• Add media

  Media

• Insulation

  Select Full coverage (%) full thickness (%) satisfactpory conditions

  • Full coverage (%)
  • full thickness (%)
  • satisfactpory conditions

• Add media

  Media

• Roof Penetrations

  Select Weather tightness operables

  • Weather tightness
  • operables

• Add media

  Media

• Flashings

  Select deterioratioon open joints holes or damage anchoring ptrotective coating

  • deterioratioon
  • open joints
  • holes or damage
  • anchoring
  • ptrotective coating

• Add media

  Media

• Drainage

  Select alignment free flowing clamping rings secure screens corrosion

  • alignment
  • free flowing
  • clamping rings secure
  • screens
  • corrosion

• Add media

  Media

C10-PART IONS AND DOORS INSPECTION CHECK LIST

• General Inspection

  Select strength and stability physical condition acoustical quality adaptablity maintainablity code compliance

  • strength and stability
  • physical condition
  • acoustical quality
  • adaptablity
  • maintainablity
  • code compliance

• Add media

  Media

• Wall Material

  Select carcks settlement holes defective material looseness operational abuse or vibration missing segments enviornomental attack water stains moisture joints structural expansion of contraction surface appearance wind pressure

  • carcks
  • settlement
  • holes
  • defective material
  • looseness
  • operational abuse or vibration
  • missing segments
  • enviornomental attack
  • water stains
  • moisture
  • joints
  • structural expansion of contraction
  • surface appearance
  • wind pressure

• Add media

  Media

• Hardware

  Select overall conditions appearance keying system operations fit lock sets cylinders panic devices mainatanablity security operations

  • overall conditions
  • appearance
  • keying system
  • operations
  • fit
  • lock sets
  • cylinders
  • panic devices
  • mainatanablity
  • security operations

• Add media

  Media

C-30 WALLS AND FINISHES INSPECTION CHECK LIST

• General Inspection

  Select Good Fair Poor evidence of moisture settlement cracks surface conditions cleanliness stains discolorations

  • Good
  • Fair
  • Poor
  • evidence of moisture
  • settlement
  • cracks
  • surface conditions
  • cleanliness
  • stains
  • discolorations

• Add media

  Media

• Paint

  Select repainting necessary peeling, cracking,flaking reflectivity maintainablity

  • repainting necessary
  • peeling, cracking,flaking
  • reflectivity
  • maintainablity

• Add media

  Media

• Covering & Coatings

  Select Yes No N/A

  • Yes
  • No
  • N/A

• Add media

  Media

• Interior Glazing

  Select cracks seals frame conditions missing panes shading devices

  • cracks
  • seals
  • frame conditions
  • missing panes
  • shading devices

• Add media

  Media

C-40 FLOORS AND FINISHES INSPECTION CHECK LIST

• General Appearence

  Select Good Fair Poor Evidence of moisture Visible settlement Irregular surface Tripping Hazards Handicapped hazards Replacement necessary

  • Good
  • Fair
  • Poor
  • Evidence of moisture
  • Visible settlement
  • Irregular surface
  • Tripping Hazards
  • Handicapped hazards
  • Replacement necessary

• Add media

  Media

• Carpet (Tufted, Tiled)

  Select Age Excessive wear Stains Discoloration Holes,tears Seam conditions

  • Age
  • Excessive wear
  • Stains
  • Discoloration
  • Holes,tears
  • Seam conditions

• Add media

  Media

• Resilient (Asphalt Tile, Cork Tile,Linoleum,Rubber,Vinyl)

  Select Broken tiles Loose tiles Shrinkage Lifting, cupping Fading cuts,holes Porosity Asbestos present

  • Broken tiles
  • Loose tiles
  • Shrinkage
  • Lifting, cupping
  • Fading
  • cuts,holes
  • Porosity
  • Asbestos present

• Add media

  Media

• Masonry (Stone & Brick)

  Select Cracks Deterioration joints Stains Porosity Sealing

  • Cracks
  • Deterioration
  • joints
  • Stains
  • Porosity
  • Sealing

• Add media

  Media

• Monolithic Topping (Concrete, Granolythic, Terrazzo,Magnesite)

  Select Cracks Porosity joints Sealing

  • Cracks
  • Porosity
  • joints
  • Sealing

• Add media

  Media

• Wood (Plank,Strips, Block,Paraquet)

  Select Shrinkage cupping, warpage Excessive wear Unevenness Decay Sealing

  • Shrinkage
  • cupping, warpage
  • Excessive wear
  • Unevenness
  • Decay
  • Sealing

• Add media

  Media

C-50 CELINGS AND FINISHES INSPECTION CHECK LIST

• General Inspections- Overall Apperance

  Select Good Fair Poor settlement or snagging alignment attachment evidence of moisture stains and discoloration missing units suitablity acoustic quality code compliance

  • Good
  • Fair
  • Poor
  • settlement or snagging
  • alignment
  • attachment
  • evidence of moisture
  • stains and discoloration
  • missing units
  • suitablity
  • acoustic quality
  • code compliance

• Add media

  Media

• Exposed Systems (Un painted, Painted,spray-on,decorative)

  Select Cracks surface deteriorations missing elements adhesion

  • Cracks
  • surface deteriorations
  • missing elements
  • adhesion

• Add media

  Media

• Applied to Structure and Suspended

  Select Good Fair Poor Fastners trim condition Openings Panel Inserts lighting fixtures air distirbution fire protections Others

  • Good
  • Fair
  • Poor
  • Fastners
  • trim condition
  • Openings Panel
  • Inserts
  • lighting fixtures
  • air distirbution
  • fire protections
  • Others

• Add media

  Media

D-10 Conveying Inspection Check List (Elevators & Escalators)

• Genreal Inspection

  Good

  Fair

  Poor

• Add media

  Media

• Over all Appearance (Interior)

  Good

  Fair

  Poor

• Add media

  Media

• Over all Appearance (Exterior)

  Good

  Fair

  Poor

• Add media

  Media

• Maintenance History

  Select Regular inspection frequency door operation control systems Noise code compliance handicapped access major repairs necessary replacment necessary

  • Regular inspection frequency
  • door operation
  • control systems
  • Noise
  • code compliance
  • handicapped access
  • major repairs necessary
  • replacment necessary

• Add media

  Media

D-20 MECHANICAL/PLUMBING INSPECTION CHECK LIST

• General Appearance

  Select Good Fair Poor Leaks,dripping,running faucets and valves Maintenance history supply adequacy sanitation hazards drain and waste connection backflow protection cross connections' fixture quatity fixture types and conduits handicapped fitures female facilities metal pipe & fitting corrosion Pipe joints and sealing pipe insulation hanger supports & clamps Filters Building user comments

  • Good
  • Fair
  • Poor
  • Leaks,dripping,running faucets and valves
  • Maintenance history
  • supply adequacy
  • sanitation hazards
  • drain and waste connection
  • backflow protection
  • cross connections'
  • fixture quatity
  • fixture types and conduits
  • handicapped fitures
  • female facilities
  • metal pipe & fitting corrosion
  • Pipe joints and sealing
  • pipe insulation
  • hanger supports & clamps
  • Filters
  • Building user comments

• Add media

  Media

• Water System

  Select water pressure adequate odors,tastes Main cut off operable water heating temperature setting pump condition insulation condition

  • water pressure adequate
  • odors,tastes
  • Main cut off operable
  • water heating temperature setting
  • pump condition
  • insulation condition

• Add media

  Media

• Sanitary

  Select flow adequate cleanout access floor drains chemical resistance gradient onsite disposal system

  • flow adequate
  • cleanout access
  • floor drains
  • chemical resistance
  • gradient
  • onsite disposal system

• Add media

  Media

• Storm System

  Select flow adequate cleanout access floor drains chemical resistance gradient onsite disposal system

  • flow adequate
  • cleanout access
  • floor drains
  • chemical resistance
  • gradient
  • onsite disposal system

• Add media

  Media

• Code Requirement

  Select Good Fair Poor Code requirements EPA/Local Permits Others if any

  • Good
  • Fair
  • Poor
  • Code requirements
  • EPA/Local Permits
  • Others if any

• Add media

  Media

• Fire Protection System

  Select Regular inspection sprinkler heads operable complies with local regulation and code controls operable Hose cabinets functional water pressure sufficinet

  • Regular inspection
  • sprinkler heads operable
  • complies with local regulation and code
  • controls operable
  • Hose cabinets functional
  • water pressure sufficinet

• Add media

  Media

D-30 MECHANICAL/HVAC INSPECTION CHECK LIST

• General Inspection

  Good

  Fair

  Poor

• Add media

  Media

• Lubrication: Bearings & Moving Parts

  Good

  Fair

  Poor

• Add media

  Media

• Rust & Corrossion

  Good

  Fair

  Poor

• Add media

  Media

• Motors,Fans,Drive,Assemblies

  Good

  Fair

  Poor

• Add media

  Media

• Pumps

  Good

  Fair

  Poor

• Add media

  Media

• Wiring & Electrical Controls

  Good

  Fair

  Poor

• Add media

  Media

• Thermostats and Automatic Temperature Controls

  Good

  Fair

  Poor

• Add media

  Media

• Thermal Insulation & Protective Coatings

  Good

  Fair

  Poor

• Add media

  Media

• Guards, Casings,Hangers,Supports,Plat Forms &Mounting Bolts

  Good

  Fair

  Poor

• Add media

  Media

• Piping System Identification

  Good

  Fair

  Poor

• Add media

  Media

• Strainers

  Good

  Fair

  Poor

• Add media

  Media

• Solenoid Valves

  Good

  Fair

  Poor

• Add media

  Media

• Water Sprayers,weirs,and similar devices

  Good

  Fair

  Poor

• Add media

  Media

• Air Cooled Condensers

  Good

  Fair

  Poor

• Add media

  Media

• Compressors

  Select Good Fair Poor

  • Good
  • Fair
  • Poor

• Add media

  Media

• Liquid Receivers

  Good

  Fair

  Poor

• Add media

  Media

• Refrigerant Driers, Strainers,Valves, Oil Traps & Accessories

  Good

  Fair

  Poor

• Add media

  Media

• Building User Comments

  Good

  Fair

  Poor

• Add media

  Media

• Cleaning, Maintenance, Repair & Replacement

  Select Registers Grills Dampers Draft diverters Plenum chambers Supply & return ducts Louvers Fire dampers

  • Registers
  • Grills
  • Dampers
  • Draft diverters
  • Plenum chambers
  • Supply & return ducts
  • Louvers
  • Fire dampers

• Add media

  Media

• Air Filters

  Select Good Fair Poor Correct Type Replacement Schedule

  • Good
  • Fair
  • Poor
  • Correct Type
  • Replacement Schedule

• Add media

  Media

• Coolig System Evaluation

  Select Cooling capacity Temperature cooling all seasons Noise level Energy Consumption Air Circulation Filteration Reliablity

  • Cooling capacity
  • Temperature
  • cooling all seasons
  • Noise level
  • Energy Consumption
  • Air Circulation
  • Filteration
  • Reliablity

• Add media

  Media

• Ventilation System Evalation

  Select air velocity exhaust air system bag collection wet collectors steam and hot water coils Electrical heating system fire hazards fire protective devices

  • air velocity
  • exhaust air system
  • bag collection
  • wet collectors
  • steam and hot water coils
  • Electrical heating system
  • fire hazards
  • fire protective devices

• Add media

  Media

D-30 MECHANICAL/HVAC INSPECTION CHECK LIST

• General Inspection

  Good

  Fair

  Poor

• Add media

  Media

• Lubrication: Bearings & Moving Parts

  Good

  Fair

  Poor

• Add media

  Media

• Rust & Corrossion

  Good

  Fair

  Poor

• Add media

  Media

• Motors,Fans,Drive,Assemblies

  Good

  Fair

  Poor

• Add media

  Media

• Pumps

  Good

  Fair

  Poor

• Add media

  Media

• Wiring & Electrical Controls

  Good

  Fair

  Poor

• Add media

  Media

• Thermostats and Automatic Temperature Controls

  Good

  Fair

  Poor

• Add media

  Media

• Thermal Insulation & Protective Coatings

  Good

  Fair

  Poor

• Add media

  Media

D-50 ELECTRICAL SERVICE & DISTRIBUTION. INSPECTION CHECK LIST

• General Inspection

  Select Good Fair Poor Safety conditions Service capacity, % used & age Switchgear capacity, % used $ age Feeder capacity, % used & age Panel capacity Thermo-scanning Mainteanance records available Convenience outlets Building user comments

  • Good
  • Fair
  • Poor
  • Safety conditions
  • Service capacity, % used & age
  • Switchgear capacity, % used $ age
  • Feeder capacity, % used & age
  • Panel capacity
  • Thermo-scanning
  • Mainteanance records available
  • Convenience outlets
  • Building user comments

• Add media

  Media

• Exterior Service

  Select Line drawing Feed source: Utility/owned Above/below ground Transformer Transformer tested Transformer arcing or burning Transformer PCB'S Ownership(facility or utility)

  • Line drawing
  • Feed source:
  • Utility/owned
  • Above/below ground
  • Transformer
  • Transformer tested
  • Transformer arcing or burning
  • Transformer PCB'S
  • Ownership(facility or utility)

• Add media

  Media

• Interior Distribution System

  Select Line Drawing Incoming conduit marked Main circuit braker marked Panel boards, junction boxes covered All wiring In conduit Conduit properly secured Panels marked Panel schedules Missing breakers

  • Line Drawing
  • Incoming conduit marked
  • Main circuit braker marked
  • Panel boards, junction boxes covered
  • All wiring In conduit
  • Conduit properly secured
  • Panels marked
  • Panel schedules
  • Missing breakers

• Add media

  Media

• Emergency Circuits

  Select Emergency generators Condition & age Auto start & switchover Testing schedule Test records available Service schedule Service Schedule records available Circuits appropriate Cooling & exhaust Fuel storage (capacity)

  • Emergency generators
  • Condition & age
  • Auto start & switchover
  • Testing schedule
  • Test records available
  • Service schedule
  • Service Schedule records available
  • Circuits appropriate
  • Cooling & exhaust
  • Fuel storage (capacity)

• Add media

  Media

• Emergency Lighting & Power Systems

  Select Battery operation Seprate power feed Exit signs Stairways/corridors Elevators Interior areas HVAC Exterior

  • Battery operation
  • Seprate power feed
  • Exit signs
  • Stairways/corridors
  • Elevators
  • Interior areas
  • HVAC
  • Exterior

• Add media

  Media

G-20 SITE WORK INSPECTION CHECK LIST

• General Inspection

  Select Overall apperanceOverall apperance Good Fair Poor Maintainability Repairs/replacements Code compliance

  • Overall apperanceOverall apperance
  • Good
  • Fair
  • Poor
  • Maintainability
  • Repairs/replacements
  • Code compliance

• Add media

  Media

• Roads, Walks & Parking Lots

  Surface conditions

  Subsurface conditions

  Settling & uplift

  Cracks,holes

  Drainage and slope

• Add media

  Media

• Curbing

  Select Alignment Erosion Repairs &Replacement

  • Alignment
  • Erosion
  • Repairs &Replacement

• Add media

  Media

• Drainage & Erosion Controls

  Select Surface drainage Manholes, catch basins Vegetation Channels,dikes Retention, detention Drains

  • Surface drainage
  • Manholes, catch basins
  • Vegetation
  • Channels,dikes
  • Retention, detention
  • Drains

• Add media

  Media

• Parking Lot Controls

  Select Location Operation Repairs/replacements

  • Location
  • Operation
  • Repairs/replacements

• Add media

  Media

H-10 SAFETY INSPECTION CHECKLIST

• General Inspection

  Select Good Fair Poor Code compliance Maintainability Means of egress Fire ratings Audible & visual device condition Extinguishing systems(see also D20 mechanical/plumbing) Lighting system(see also D50 Electrical Lighting/poweer) Handicapped accessibility

  • Good
  • Fair
  • Poor
  • Code compliance
  • Maintainability
  • Means of egress
  • Fire ratings
  • Audible & visual device condition
  • Extinguishing systems(see also D20 mechanical/plumbing)
  • Lighting system(see also D50 Electrical Lighting/poweer)
  • Handicapped accessibility

• Add media

  Media

• Exterior Lighting

  Select Good Fair Poor Adequacy Condition Controls (type & locations)

  • Good
  • Fair
  • Poor
  • Adequacy
  • Condition
  • Controls (type & locations)

• Add media

  Media

• Fire Alarm Systems

  Select Panel visible Operational Pull station condition Detector conditions

  • Panel visible
  • Operational
  • Pull station condition
  • Detector conditions

• Add media

  Media

• Stairs & Ramps

  Select Exits marked Hardware operational Tripping hazard Surface conditions Lighting adequate Handrails

  • Exits marked
  • Hardware operational
  • Tripping hazard
  • Surface conditions
  • Lighting adequate
  • Handrails

• Add media

  Media