Title Page
-
Site conducted
-
Conducted on
-
Prepared by
Inspection Report
Fire Door Inspection - 1st door
-
Door ID / Number: -
-
Take Photo of Door ID
-
Fire Rating Required:-
-
Location / Gridline:-
- Ground Floor
- 1st Floor
- 2nd Floor
- 3rd floor
- 4th Floor
- 5th Floor
- 6th Floor
- Other
- Basement
- Plant Room
-
Specify door Location
-
Single or double leaf:-
-
Leaf Size (H x L x T) mm:-
-
Frame Size (W x D) mm:-
-
Gaps (Top) Between 2mm - 4mm
-
Gaps (Hinge side) Between 2mm - 4mm
-
Gaps (Lock side) Between 2mm - 4mm
-
Gaps (Threshold) mm:-
-
Gaps (Meeting Edge) Between 2mm - 4mm
-
Intumescent Seals Installed?
-
Smoke Seals Installed?
-
Frame to wall sealing: -
-
Are all the required signage in place?
-
Is all Ironmongery in good working condition
-
Have these items been installed as per manufacturers installation instructions or BS8214: 2016
-
Are any actions required for compliance on this Fire Door?
-
Reccomended actions required to make Fire Door compliant
- New Hinges Required
- Adjust Leaf to Frame Gaps between 2mm - 4mm
- New Intumescent Seals / Smoke Seals Required
- Adjust Overhead Closer / Concealed Closer
- New Door Lock / Handle Required
- New Fire Door Required
- New Frame Required
- New Glass for Vision Panel, Side Panel or Overhead Panel
- New Drop Down Seal Required
- Adjust Drop Down Seal
- Seal Frame to Wall
- Other - Please see additional comments section
- Lipping needs replaced
-
Photo to be Taken
-
Additional comments
Fire Door Inspection - 2nd door
-
Door ID / Number: -
-
Take Photo of Door ID
-
Fire Rating Required:-
-
Location / Gridline:-
- Ground Floor
- 1st Floor
- 2nd Floor
- 3rd floor
- 4th Floor
- 5th Floor
- 6th Floor
- Other
- Basement
- Plant Room
-
Specify door Location
-
Single or double leaf:-
-
Single or double action:-
-
Leaf Size (H x L x T) mm:-
-
Frame Size (W x D) mm:-
-
Gaps (Top) Between 2mm - 4mm
-
Gaps (Hinge side) Between 2mm - 4mm
-
Gaps (Lock side) Between 2mm - 4mm
-
Gaps (Threshold) mm:-
-
Gaps (Meeting Edge) Between 2mm - 4mm
-
Intumescent Seals Installed?
-
Smoke Seals Installed?
-
Frame to wall sealing: -
-
Are all the required signage in place?
-
Is all Ironmongery in good working condition
-
Have these items been installed as per manufacturers installation instructions or BS8214: 2016
-
Are any actions required for compliance on this Fire Door?
-
Reccomended actions required to make Fire Door compliant
- New Hinges Required
- Adjust Leaf to Frame Gaps between 2mm - 4mm
- New Intumescent Seals / Smoke Seals Required
- Adjust Overhead Closer / Concealed Closer
- New Door Lock / Handle Required
- New Fire Door Required
- New Frame Required
- New Glass for Vision Panel, Side Panel or Overhead Panel
- New Drop Down Seal Required
- Adjust Drop Down Seal
- Seal Frame to Wall
- Other - Please see additional comments section
- Lipping needs replaced
-
Photo to be Taken
-
Additional comments
Fire Door Inspection - 3rd door
-
Door ID / Number: -
-
Take Photo of Door ID
-
Fire Rating Required:-
-
Location / Gridline:-
- Ground Floor
- 1st Floor
- 2nd Floor
- 3rd floor
- 4th Floor
- 5th Floor
- 6th Floor
- Other
- Basement
- Plant Room
-
Specify door Location
-
Single or double leaf:-
-
Single or double action:-
-
Leaf Size (H x L x T) mm:-
-
Frame Size (W x D) mm:-
-
Gaps (Top) Between 2mm - 4mm
-
Gaps (Hinge side) Between 2mm - 4mm
-
Gaps (Lock side) Between 2mm - 4mm
-
Gaps (Threshold) mm:-
-
Gaps (Meeting Edge) Between 2mm - 4mm
-
Intumescent Seals Installed?
-
Smoke Seals Installed?
-
Frame to wall sealing: -
-
Are all the required signage in place?
-
Is all Ironmongery in good working condition
-
Have these items been installed as per manufacturers installation instructions or BS8214: 2016
-
Are any actions required for compliance on this Fire Door?
-
Reccomended actions required to make Fire Door compliant
- New Hinges Required
- Adjust Leaf to Frame Gaps between 2mm - 4mm
- New Intumescent Seals / Smoke Seals Required
- Adjust Overhead Closer / Concealed Closer
- New Door Lock / Handle Required
- New Fire Door Required
- New Frame Required
- New Glass for Vision Panel, Side Panel or Overhead Panel
- New Drop Down Seal Required
- Adjust Drop Down Seal
- Seal Frame to Wall
- Other - Please see additional comments section
- Lipping needs replaced
-
Photo to be Taken
-
Additional comments
Fire Door Inspection - 4th Door
-
Door ID / Number: -
-
Take Photo of Door ID
-
Fire Rating Required:-
-
Location / Gridline:-
- Ground Floor
- 1st Floor
- 2nd Floor
- 3rd floor
- 4th Floor
- 5th Floor
- 6th Floor
- Other
- Basement
- Plant Room
-
Specify door Location
-
Single or double leaf:-
-
Single or double action:-
-
Leaf Size (H x L x T mm:-
-
Frame Size (W x D) mm:-
-
Gaps (Top) Between 2mm - 4mm
-
Gaps (Hinge side) Between 2mm - 4mm
-
Gaps (Lock side) Between 2mm - 4mm
-
Gaps (Threshold) mm:-
-
Gaps (Meeting Edge) Between 2mm - 4mm
-
Intumescent Seals Installed?
-
Smoke Seals Installed?
-
Frame to wall sealing: -
-
Are all the required signage in place?
-
Is all Ironmongery in good working condition
-
Have these items been installed as per manufacturers installation instructions or BS8214: 2016
-
Are any actions required for compliance on this Fire Door?
-
Reccomended actions required to make Fire Door compliant
- New Hinges Required
- Adjust Leaf to Frame Gaps between 2mm - 4mm
- New Intumescent Seals / Smoke Seals Required
- Adjust Overhead Closer / Concealed Closer
- New Door Lock / Handle Required
- New Fire Door Required
- New Frame Required
- New Glass for Vision Panel, Side Panel or Overhead Panel
- New Drop Down Seal Required
- Adjust Drop Down Seal
- Seal Frame to Wall
- Other - Please see additional comments section
- Lipping needs replaced
-
Photo to be Taken
-
Additional comments
Fire Door Inspection - 5th Door
-
Door ID / Number: -
-
Take Photo of Door ID
-
Fire Rating Required:-
-
Location / Gridline:-
- Ground Floor
- 1st Floor
- 2nd Floor
- 3rd floor
- 4th Floor
- 5th Floor
- 6th Floor
- Other
- Basement
- Plant Room
-
Single or double leaf:-
-
Single or double action:-
-
Leaf Size (H x L x T) mm:-
-
Frame Size (W x D) mm:-
-
Gaps (Top) Between 2mm - 4mm
-
Gaps (Hinge side) Between 2mm - 4mm
-
Gaps (Lock side) Between 2mm - 4mm
-
Gaps (Threshold) mm:-
-
Gaps (Meeting Edge) Between 2mm - 4mm
-
Intumescent Seals Installed?
-
Smoke Seals Installed?
-
Frame to wall sealing: -
-
Are all the required signage in place?
-
Is all Ironmongery in good working condition
-
Have these items been installed as per manufacturers installation instructions or BS8214: 2016
-
Are any actions required for compliance on this Fire Door?
-
Reccomended actions required to make Fire Door compliant
- New Hinges Required
- Adjust Leaf to Frame Gaps between 2mm - 4mm
- New Intumescent Seals / Smoke Seals Required
- Adjust Overhead Closer / Concealed Closer
- New Door Lock / Handle Required
- New Fire Door Required
- New Frame Required
- New Glass for Vision Panel, Side Panel or Overhead Panel
- New Drop Down Seal Required
- Adjust Drop Down Seal
- Seal Frame to Wall
- Other - Please see additional comments section
- Lipping needs replaced
-
Photo to be Taken
-
Additional comments
Fire Door Inspection - 6th Door
-
Door ID / Number: -
-
Take Photo of Door ID
-
Fire Rating Required:-
-
Location / Gridline:-
- Ground Floor
- 1st Floor
- 2nd Floor
- 3rd floor
- 4th Floor
- 5th Floor
- 6th Floor
- Other
- Basement
- Plant Room
-
Single or double leaf:-
-
Single or double action:-
-
Leaf Size (H x L x T) mm:-
-
Frame Size (W x D) mm:-
-
Gaps (Top) Between 2mm - 4mm
-
Gaps (Hinge side) Between 2mm - 4mm
-
Gaps (Lock side) Between 2mm - 4mm
-
Gaps (Threshold) mm:-
-
Gaps (Meeting Edge) Between 2mm - 4mm
-
Intumescent Seals Installed?
-
Smoke Seals Installed?
-
Frame to wall sealing: -
-
Are all the required signage in place?
-
Is all Ironmongery in good working condition
-
Have these items been installed as per manufacturers installation instructions or BS8214: 2016
-
Are any actions required for compliance on this Fire Door?
-
Reccomended actions required to make Fire Door compliant
- New Hinges Required
- Adjust Leaf to Frame Gaps between 2mm - 4mm
- New Intumescent Seals / Smoke Seals Required
- Adjust Overhead Closer / Concealed Closer
- New Door Lock / Handle Required
- New Fire Door Required
- New Frame Required
- New Glass for Vision Panel, Side Panel or Overhead Panel
- New Drop Down Seal Required
- Adjust Drop Down Seal
- Seal Frame to Wall
- Other - Please see additional comments section
- Lipping needs replaced
-
Photo to be Taken
-
Additional comments
Fire Door Inspection - 7th door
-
Door ID / Number: -
-
Take Photo of Door ID
-
Fire Rating Required:-
-
Location / Gridline:-
- Ground Floor
- 1st Floor
- 2nd Floor
- 3rd floor
- 4th Floor
- 5th Floor
- 6th Floor
- Other
- Basement
- Plant Room
-
Single or double leaf:-
-
Single or double action:-
-
Leaf Size (H x L x T) mm:-
-
Frame Size (W x D) mm:-
-
Gaps (Top) Between 2mm - 4mm
-
Gaps (Hinge side) Between 2mm - 4mm
-
Gaps (Lock side) Between 2mm - 4mm
-
Gaps (Threshold) mm:-
-
Gaps (Meeting Edge) Between 2mm - 4mm
-
Intumescent Seals Installed?
-
Smoke Seals Installed?
-
Frame to wall sealing: -
-
Are all the required signage in place?
-
Is all Ironmongery in good working condition
-
Have these items been installed as per manufacturers installation instructions or BS8214: 2016
-
Are any actions required for compliance on this Fire Door?
-
Reccomended actions required to make Fire Door compliant
- New Hinges Required
- Adjust Leaf to Frame Gaps between 2mm - 4mm
- New Intumescent Seals / Smoke Seals Required
- Adjust Overhead Closer / Concealed Closer
- New Door Lock / Handle Required
- New Fire Door Required
- New Frame Required
- New Glass for Vision Panel, Side Panel or Overhead Panel
- New Drop Down Seal Required
- Adjust Drop Down Seal
- Seal Frame to Wall
- Other - Please see additional comments section
- Lipping needs replaced
-
Photo to be Taken
-
Additional comments
Fire Door Inspection - 8th Door
-
Door ID / Number: -
-
Take Photo of Door ID
-
Fire Rating Required:-
-
Location / Gridline:-
- Ground Floor
- 1st Floor
- 2nd Floor
- 3rd floor
- 4th Floor
- 5th Floor
- 6th Floor
- Other
- Basement
- Plant Room
-
Single or double leaf:-
-
Single or double action:-
-
Leaf Size (H x L x T) mm:-
-
Frame Size (W x D) mm:-
-
Gaps (Top) Between 2mm - 4mm
-
Gaps (Hinge side) Between 2mm - 4mm
-
Gaps (Lock side) Between 2mm - 4mm
-
Gaps (Threshold) mm:-
-
Gaps (Meeting Edge) Between 2mm - 4mm
-
Intumescent Seals Installed?
-
Smoke Seals Installed?
-
Frame to wall sealing: -
-
Are all the required signage in place?
-
Is all Ironmongery in good working condition
-
Have these items been installed as per manufacturers installation instructions or BS8214: 2016
-
Are any actions required for compliance on this Fire Door?
-
Reccomended actions required to make Fire Door compliant
- New Hinges Required
- Adjust Leaf to Frame Gaps between 2mm - 4mm
- New Intumescent Seals / Smoke Seals Required
- Adjust Overhead Closer / Concealed Closer
- New Door Lock / Handle Required
- New Fire Door Required
- New Frame Required
- New Glass for Vision Panel, Side Panel or Overhead Panel
- New Drop Down Seal Required
- Adjust Drop Down Seal
- Seal Frame to Wall
- Other - Please see additional comments section
- Lipping needs replaced
-
Photo to be Taken
-
Additional comments
Fire Door Inspection - 9th Door
-
Door ID / Number: -
-
Take Photo of Door ID
-
Fire Rating Required:-
-
Location / Gridline:-
- Ground Floor
- 1st Floor
- 2nd Floor
- 3rd floor
- 4th Floor
- 5th Floor
- 6th Floor
- Other
- Basement
- Plant Room
-
Single or double leaf:-
-
Single or double action:-
-
Leaf Size (H x L x T) mm:-
-
Frame Size (W x D) mm:-
-
Gaps (Top) Between 2mm - 4mm
-
Gaps (Hinge side) Between 2mm - 4mm
-
Gaps (Lock side) Between 2mm - 4mm
-
Gaps (Threshold) mm:-
-
Gaps (Meeting Edge) Between 2mm - 4mm
-
Intumescent Seals Installed?
-
Smoke Seals Installed?
-
Frame to wall sealing: -
-
Are all the required signage in place?
-
Is all Ironmongery in good working condition
-
Have these items been installed as per manufacturers installation instructions or BS8214: 2016
-
Are any actions required for compliance on this Fire Door?
-
Reccomended actions required to make Fire Door compliant
- New Hinges Required
- Adjust Leaf to Frame Gaps between 2mm - 4mm
- New Intumescent Seals / Smoke Seals Required
- Adjust Overhead Closer / Concealed Closer
- New Door Lock / Handle Required
- New Fire Door Required
- New Frame Required
- New Glass for Vision Panel, Side Panel or Overhead Panel
- New Drop Down Seal Required
- Adjust Drop Down Seal
- Seal Frame to Wall
- Other - Please see additional comments section
- Lipping needs replaced
-
Photo to be Taken
-
Additional comments
Fire Door Inspection - 10th door
-
Door ID / Number: -
-
Take Photo of Door ID
-
Fire Rating Required:-
-
Location / Gridline:-
- Ground Floor
- 1st Floor
- 2nd Floor
- 3rd floor
- 4th Floor
- 5th Floor
- 6th Floor
- Other
- Basement
- Plant Room
-
Single or double leaf:-
-
Single or double action:-
-
Leaf Size (H x L x T) mm:-
-
Frame Size (W x D) mm:-
-
Gaps (Top) Between 2mm - 4mm
-
Gaps (Hinge side) Between 2mm - 4mm
-
Gaps (Lock side) Between 2mm - 4mm
-
Gaps (Threshold) mm:-
-
Gaps (Meeting Edge) Between 2mm - 4mm
-
Intumescent Seals Installed?
-
Smoke Seals Installed?
-
Frame to wall sealing: -
-
Are all the required signage in place?
-
Is all Ironmongery in good working condition
-
Have these items been installed as per manufacturers installation instructions or BS8214: 2016
-
Are any actions required for compliance on this Fire Door?
-
Reccomended actions required to make Fire Door compliant
- New Hinges Required
- Adjust Leaf to Frame Gaps between 2mm - 4mm
- New Intumescent Seals / Smoke Seals Required
- Adjust Overhead Closer / Concealed Closer
- New Door Lock / Handle Required
- New Fire Door Required
- New Frame Required
- New Glass for Vision Panel, Side Panel or Overhead Panel
- New Drop Down Seal Required
- Adjust Drop Down Seal
- Seal Frame to Wall
- Other - Please see additional comments section
- Lipping needs replaced
-
Photo to be Taken
-
Additional comments