Title Page
-
Assessment Conducted on Behalf of
-
Site
-
Property Location
-
Conducted on
-
Prepared by
-
Whilst William Waugh & Sons (Builders) Ltd has made every effort to provide accurate information on the date of creation of this inspection, we cannot accept any liability relating to loss or damage arising from the information contained here. Any action points arising from the inspection should be attended to as soon as possible.
Fire Door Inspection Report
- Fire Door Details
-
Door ID
-
Certification ID
-
Manufacturer
-
Installer (if known)
-
Door configuration
- Single Door
- Double Door
- Door and Half
- Sliding Door
- Barn Door
- Bi-Fold Door
- Pocket Door
- Other (Details in Notes)
-
Location in building
- Front door
- Back Door
- Corridor
- Living Room
- Bathroom
- WC
- Dining Room
- Kitchen
- Bedroom 1
- Bedroom 2
- Bedroom 3
- Office
- Garage
- Boiler Room/Cupboard
- Store
- Electrical Cupboard
- Other (details in Notes)
-
Door Material
-
FD Rating
- FD30
- FD60
- FD90
- FD120
- Other (Details in Notes)
- Can't be confirmed at time of inspection
-
Door Frame material
- Softwood
- Hardwood
- Steel
- Aluminium
- Composite
- Other (Details in Notes)
-
Door Frame Construction method
-
Door Leaf
-
Glazing present in door
-
Is glazing kitemarked/etched showing Fire Performance Rating?
- Yes
- No
- Unable to determine during inspection
-
Does installation meet tolerance criteria?
-
Lockset/Latch
-
Is Lockset/Latch CE marked and CERTIFIRE approved and listed on Door Fire Certificate?
- Yes
- No
- Unable to determine during inspection
-
Does installation meet tolerance criteria?
- Yes
- No
- Unable to determine during inspection
-
Panic/Emergency Set
-
Is Emergency Set CE marked and CERTIFIRE approved and listed on Door Fire Certificate?
- Yes
- No
- Unable to determine during inspection
-
Does installation meet tolerance criteria?
- Yes
- No
- Unable to determine during inspection
-
Door Closer/Floor Spring
- Yes
- No
- Unable to determine during inspection
-
Is Door Closer/Floor Spring CE marked and CERTIFIRE approved and listed on Door Fire Certificate?
- Yes
- No
- Unable to determine during inspection
-
Does installation meet tolerance criteria?
-
Hold Open Device
- Yes
- No
- Unable to determine during inspection
-
Is Hold Open Device CE marked and CERTIFIRE approved and listed on Door Fire Certificate?
- Yes
- No
- Unable to determine during inspection
-
Does installation meet tolerance criteria?
- Yes
- No
- Unable to determine during inspection
-
Hinges/Pivots
- Yes
- No
- Unable to determine during inspection
-
Are Hinges/Pivots CE marked and CERTIFIRE approved and listed on Door Fire Certificate?
- Yes
- No
- Unable to determine during inspection
-
Does installation meet tolerance criteria?
-
Fire Seals
- Yes
- No
- Unable to determine during inspection
-
Are Fire Seals listed on Door Fire Certificate?
- Yes
- No
- Unable to determine during inspection
-
Does installation meet tolerance criteria?
- Yes
- No
- Unable to determine during inspection
-
Smoke Seals
- Yes
- No
- Unable to determine during inspection
-
Are smoke seals CE marked and CERTIFIRE approved and listed on Door Fire Certificate?
- Yes
- No
- Unable to determine during inspection
-
Does installation meet tolerance criteria?
- Yes
- No
- Unable to determine during inspection
-
Threshold seals and Gap
- Yes
- No
- Unable to determine during inspection
-
Is threshold gap within acceptable tolerance?
- Yes
- No
- Unable to determine during inspection
-
Is threshold seal present?
- Yes
- No
- Unable to determine during inspection
-
Does installation meet tolerance criteria?
- Yes
- No
- Unable to determine during inspection
-
Letter Box
-
Is Letterbox CE marked and CERTIFIRE approved and listed on Door Fire Certificate?
- Yes
- No
- Unable to determine during inspection
-
Does installation meet tolerance criteria?
- Yes
- No
- Unable to determine during inspection
-
Handle Furniture
- Yes
- No
- Unable to determine during inspection
-
Is Handle Furniture CE marked and CERTIFIRE approved and listed on Door Fire Certificate?
- Yes
- No
- Unable to determine during inspection
-
Does installation meet tolerance criteria?
- Yes
- No
- Unable to determine during inspection
-
Push Plates/Kick Plates
- Yes
- No
- Unable to determine during inspection
-
Are Push Plates/Kick Plates CE marked and CERTIFIRE approved and listed on Door Fire Certificate?
- Yes
- No
- Unable to determine during inspection
-
Does installation meet tolerance criteria?
- Yes
- No
- Unable to determine during inspection
-
Bolt
- Yes
- No
- Unable to determine during inspection
-
Is Bolt CE marked and CERTIFIRE approved and listed on Door Fire Certificate?
- Yes
- No
- Unable to determine during inspection
-
Does installation meet tolerance criteria?
- Yes
- No
- Unable to determine during inspection
-
Hardware Intumescent Protection
- Yes
- No
- Unable to determine during inspection
-
Is Hardware Intumescent Protection CE marked and CERTIFIRE approved and listed on Door Fire Certificate?
- Yes
- No
- Unable to determine during inspection
-
Does installation meet tolerance criteria?
- Yes
- No
- Unable to determine during inspection
-
Air Transfer Grille or Spy Viewer
- Yes
- No
- Unable to determine during inspection
-
Is Air Transfer Grille/Spy Viewer CE marked and CERTIFIRE approved and listed on Door Fire Certificate?
- Yes
- No
- Unable to determine during inspection
-
Does installation meet tolerance criteria?
- Yes
- No
- Unable to determine during inspection
-
Edge/Face Protectors
- Yes
- No
- Unable to determine during inspection
-
Are Edge/Face protectors CE marked and CERTIFIRE approved and listed on Door Fire Certificate?
- Yes
- No
- Unable to determine during inspection
-
Does installation meet tolerance criteria?
- Yes
- No
- Unable to determine during inspection
-
Wall Interface
- Yes
- No
- Unable to determine during inspection
-
Does interface with the wall impact on tolerance criteria or fire door functionality?
- Yes
- No
- Unable to determine during inspection
-
Signage
- Yes
- No
- Unable to determine during inspection
-
Is Signage listed on Door Fire Certificate?
- Yes
- No
- Unable to determine during inspection
-
Does installation meet tolerance criteria?
- Yes
- No
- Unable to determine during inspection
-
Other Components
-
Comments, defects and remedial work required
-
Door status
- Certified
- Nominal
- Evidenced
- Unsuitable
- Suitable (Escape Door)
Conclusion
Summary
-
Any other comments/observations
-
Name of Inspector
-
Date
-
Signed