Title Page
-
It is compulsory that this checklist is completed weekly, any issues noted are to be forwarded to the Facilities Department to be rectified.
Check to include
1. Location of each unit is correct
2. Ensure each unit is not obstructed
3. Signage and labels are visible
4. Extinguisher is undamaged and has not been operated
5. Gauge and/or pin are in correct position and the needle is showing GREEN
6. Seal is intact -
Site conducted
-
Conducted on
-
Prepared by
-
Location
-
1 Customer service 2kg Co2
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
2 Customer service 6lt AFFF foam
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
2a Stores entrance 6kg Dry Powder
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
2b Stores shutter 2kg Co2
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
3 Rear corner LHS exit 6lt AFFF foam
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
4 Rear corner LHS exit 2kg Co2
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
5 Front entrance 6lt AFFF foam
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
6 Front entrance 2kg Co2
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
7 Rear corner RHS 2kg Co2
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
8 Rear corner RHS 6lt AFFF foam
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
9 Pillar door to electrical 2kg Co2
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
10 Pillar door to electrical 6lt AFFF foam
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
11 Love tech 2kg Co2
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
12 Photo centre 2kg Co2
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
13 Fire exit side wall to electrical 2kg Co2
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
14 Fire exit side wall to electrical 6lt AFFF foam
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
15 Rear entrance elec RHS 2kg Co2
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
16 Rear entrance elec RHS 2kg Co2
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
17 Rear entrance elec RHS 6lt AFFF foam
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
18 Rear entrance corridor 6lt AFFF foam
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
19 O/s toilets / offices 2kg Co2
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
20 O/s toilets / offices 6lt AFFF foam
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
21 Upstairs corridor 6lt AFFF foam
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
22 Upstairs corridor 2kg Co2
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
23 Canteen Fire blanket
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
24 Warehouse shutter 6lt AFFF foam
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
25 Warehouse shutter 5kg Co2
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
26 Upstairs stores rear exit 9lt AFFF foam
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
27 Comm,s Room
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
28 Spare
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
29 Electrical Mezz Hose Reel
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
30 Front entrance Hose reel
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
31 LHS rear corner exit Hose reel
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
32 Rear RHS corner exit Hose reel
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
33 Pillar to electrical Hose reel
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
34 E/exit side wall electrical Hose reel
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
35 Bottom stairs Hose reel
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
36 Top stairs Hose reel
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
37 Goods in Hose reel
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
-
38 Electrical Hose reel
-
Reason for Failure
- 1. Location of each unit is correct
- 2. Ensure each unit is not obstructed
- 3. Signage and labels are visible
- 4. Extinguisher is undamaged and has not been operated
- 5. Gauge and/or pin are in correct position and the needle is showing GREEN
- 6. Seal is intact
Sign-Off
-
Completed By
-
Date & Time
