Title Page

  • Site ID

  • Site Development Name

  • Block Name

  • Site Location
  • Installation Completed by

  • Site Operative Responsible For This Report

  • Deployment ADM Responsible For The Build

  • Specify Other Deployment ADM

  • FTM/Supervisor Responsible For Onsite Operatives

  • Specify Other FTM

  • Contractor Company Name

  • Contractor Engineer Name

  • Specify Company Name

  • Contactor Engineer Name

  • Deployment ADM

  • Specify Other Deployment ADM

  • Report Start Date

Record Of Installation

  • Instructions for logging fire stopping items as follows:

    -All entries made into this log must be valid against the method statements laid out within the Hyperoptic Fire Stopping Guidance document.

    -Any reinstatements authorised by building management made into existing passive systems such as mineral batt or, mortar compound must not be recorded into the log.

    -Any reinstatement authorised by building management made into the walls, floors, and partitions containing existing defects must not be recorded into the log.

    -Pre & Post images must be provided for each entry. The images must be clear and taken front on to ensure clarity.

    -Product use will be automatically set as a response post selecting the substate type and service type being reinstated. Note: The post image must match the product applied.

    Instructions for product use as follows:

    -HILTI CFS-IS Intumescent Sealant must be used when fire stopping around any Hyperoptic service passing through a solid floor or, solid wall. THIS DOES NOT APPLY TO COMMUNAL AREAS! IN COMMUNAL AREAS SOILD WALL MUST BE REINSTATED USING FSI.

    -A HILTI Cable Disc must be used when fire stopping around any Hyperoptic service passing through a plasterboard partition within a riser cupboard/intake room or, above the ceiling line to where fire breaks are present within the void.

    -FSI Pyroacoustic Fire Stop Sealant must be used when fire stopping around any Hyperoptic service passing through a solid wall or, plasterboard partition below the ceiling line within a communal area that is visible to residents and other building users.

  • Please use link to access the fire stopping guidance document https://acrobat.adobe.com/id/urn:aaid:sc:EU:f0583036-e6e4-4c12-9f55-790447a2b99f

Reinstatement Log

    Item
  • Operative name

  • Re-Instatement date

  • Location of Fire Stopping

  • Substrate Type

  • State Floor Level

  • State Service Type

  • State Product Type Used

  • State Product Resistance Time

  • Pre Reinstatement Image

  • Pre Reinstatement Image

  • State Floor Level

  • State Service Type

  • State Product Type Used

  • State Product Resistance Time

  • Pre Reinstatement Image

  • Pre Reinstatement Image

  • State Floor Level

  • State Service Type

  • State Product Type Used

  • State Product Resistance Time

  • Pre Reinstatement Image

  • Pre Reinstatement Image

  • State Floor Level

  • State Service Type

  • State Product Type Used

  • State Product Resistance Time

  • Pre Reinstatement Image

  • Pre Reinstatement Image

  • Substrate Type

  • State Floor Level

  • State Service Type

  • State Product Type Used

  • State Product Resistance Time

  • Pre Reinstatement Image

  • Pre Reinstatement Image

Sign Off

General Notes and Comments

  • Notes & comments

Signatories

  • Operative Signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.