Flat Entrance Door Inspection

FED Inspection

• Client / Site

  Select

• Document No.

• Prepared by

• Conducted on

  Date

• Next Due Date

  Date

• Flat Entrance Door Inspection

Flat Entrance Door

Door

• Does the door leaf sit against the door stop and is it free from distortion?

  Yes

  No

  N/A

Door Frame

• Is the frame in a good state of repair?

  Yes

  No

  N/A

• Is the door frame securely attached to the wall?

  Yes

  No

  N/A

• Is the frame to door leaf gap consistent?

  Yes

  No

  N/A

Door Seals

• Are intumescent seals in place?

  Yes

  No

  N/A

• Are the seals well attached inside the groove in the door leaf or frame?

  Yes

  No

  N/A

• Are brush or fin type seals free from damage?

  Yes

  No

  N/A

• Are the smoke seals continuous around the door leaf or door frame?

  Yes

  No

  N/A

Door Hinges

• Is there a minimum of 3 hinges with all the screws fitted?

  Yes

  No

  N/A

• Are all the screws the correct size?

  Yes

  No

  N/A

Door Closers

• Is there a door closer?

  Yes

  No

  N/A

• Open the door to 75mm or 5 degrees. Does it close and engage with the latch?

  Yes

  No

  N/A

• Is the closer free from damage?

  Yes

  No

  N/A

Lock & Latch

• Does the latch hold the door firmly in the frame without rattling

  Yes

  No

  N/A

Glazing & Glass

• Is there Glazing?

  Yes

  No

  N/A

• Is the intumescent seal continuous and attached to the glass and bead?

  Yes

  No

  N/A

• Are the glazing beads well attached to the frame and free from damage?

  Yes

  No

  N/A

• Is the glass free from cracking or damage

  Yes

  No

  N/A

• If the glass has been replaced is it fire rated glass?

  Yes

  No

  N/A

Threshold Gap

• Is there a consistent gap under the door that allows it to swing without touching the floor covering?

  Yes

  No

  N/A

Comments

• undefined