Title Page
-
Conducted on
-
Prepared by
-
Location
Items that must be checked for each fire door inspection.
-
Door central and parallel with the frame,
-
Door frame free from damage
-
Frame secure and frame fully sealed
-
Signage fitted and visible, flat number etc
-
Gap between door and frame 3mm/4mm or less
-
Intumescent seals in place without any damage
-
Intumescent seals around the glass
-
Glass must be fire resistant with a kite mark
-
Suitable steel hinges and screws fitted free from wear
-
Door closure fitted and functioning correctly
-
Door must close correctly into the frame from any angle
-
Door lock and thumb lock fitted and working correctly
-
Gap below the door is less than 8mm
-
If there is a hold open device fitted,does it work correctly and release on alarm activation
-
Detail below all communal fire doors which ARE in safe/ correct working condition
-
Detail below all communal fire doors which are NOT in safe/correct working condition.
-
Please list all defects along with photographic evidence.
-
Detail below all flat and communal fire doors unable to be inspected
Remedial Action Detail
-
Where issues have been identified, please provide the remedial actions below and where relevant include ( completion time, responsible person, job numbers)
Untitled Page