Fire Safety Inspection - Communal and Flat Entrance Doors

• Conducted on

  Date

• Prepared by

• Location

Items that must be checked for each fire door inspection.

• Door central and parallel with the frame,

  Yes

  No

  N/A

• Door frame free from damage

  Yes

  No

  N/A

• Frame secure and frame fully sealed

  Yes

  No

  N/A

• Signage fitted and visible, flat number etc

  Yes

  No

  N/A

• Gap between door and frame 3mm/4mm or less

  Yes

  No

  N/A

• Intumescent seals in place without any damage

  Yes

  No

  N/A

• Intumescent seals around the glass

  Yes

  No

  N/A

• Glass must be fire resistant with a kite mark

  Yes

  No

  N/A

• Suitable steel hinges and screws fitted free from wear

  Yes

  No

  N/A

• Door closure fitted and functioning correctly

  Yes

  No

  N/A

• Door must close correctly into the frame from any angle

  Yes

  No

  N/A

• Door lock and thumb lock fitted and working correctly

  Yes

  No

  N/A

• Gap below the door is less than 8mm

  Yes

  No

  N/A

• If there is a hold open device fitted,does it work correctly and release on alarm activation

  Yes

  No

  N/A

• Detail below all communal fire doors which ARE in safe/ correct working condition

• Detail below all communal fire doors which are NOT in safe/correct working condition.

• Please list all defects along with photographic evidence.

• Detail below all flat and communal fire doors unable to be inspected

Remedial Action Detail

• Where issues have been identified, please provide the remedial actions below and where relevant include ( completion time, responsible person, job numbers)

• Yes

  No

  N/A