Title Page

  • Conducted on

  • Prepared by

  • Location
  • Staff name

  • Vehicle

  • Licence checked

  • Before starting Vehicle Safety Check

  • Check tyres are inflated correctly

  • Check windows and mirrors are clean

  • Check power lead is disconnected

  • Check batteries and water levels

  • Check gas bottle compartments are latched or locked

  • Walk around vehicle ensure all doors closed

  • Understands which is required for this vehicle

  • Vehicle start check

  • Hand break off

  • Reversing camera checked

  • Review mirrors adjusted

  • Make sure all surrounds are clear before moving vehicle

  • Demonstrates the correct use of coffee Machine

  • Starting safely

  • Correct use of steam wonds and holding milk jugs

  • Correct use of group handles

  • Correct process of seasoning machine at start of day

  • Understanding all gas and power switches on machine

  • Demonstrated correct process for cleaning machine‘

  • Demonstrates correct use of grinder

  • Understands when refilling grinder. Not to put plastic lid on top of coffee machine.

  • Understands not to put hand inside grinder while operating

  • Demonstrate how to adjust grinder

  • Know how to turn grinder off and on

  • Gas bottle change and storage

  • Correctly followed 4 step process in swapping gas bottle in correct order

  • 1. Turned of the gas bottle in clockwise direction

  • 2. removed the gas regulator

  • 3. Replaced gas bottle correctly ,with checking thread not damages and rubber ring not perished

  • 4. Checked for any gas leak

  • Ensured empty gas bottle was stowed and secured in side compartment

  • Ensured laches of compartment both locked

  • Drained waste water

  • Emptied tank comply

  • Ran fresh water to through understands how to unblock drain if required

  • Closed tap

  • refill water

  • Checked water level to see how much water required

  • After fill water tank replaced bung

  • correct process for connecting power to van

  • Ensured power was switched off at wall power point before connecting power lead to van and switched power on

  • Checked the the correct mains light came on on the inverter

SIGNATURE PAGE

  • Add signature

  • Staff member to sign that they been trained to operate all equipment safely

  • Add signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.