H107 Trade test Copy

• Conducted on

  Date

• Prepared by

• Location
  Address

Candidate Details

• Candidate name

• Candidate service number

• Photo ID

  Media

Apply Circuit Main Earths PPE

• Approved helmet

• Approved protective eyewear

• Arc resistant coveralls

• Climbing boots

• Harness checked and fitted correctly

• Approved climbing and work position belts

• Approved protective gloves

• Approved fall arrest lanyard

• HV gloves tested and checked before use

Insulator change

Risk Assessment

• Risk assessment completed?

  Risk assessment completed with all relevant risks identified ,eliminated or controlled

  Incomplete risk assessment

  Risk assessment not carried out

• Evidence of risk assessment

  Media

• HV gloves removed and work gloves worn?

• Climb to correct work position and fall arrest lanyard installed.

• Work position belt used?

  Yes

  No

  N/A

• Correct tools and equipment selected?

  Yes

  No

  N/A

• Completed insulator change?

  Yes

  No

  N/A

• Assessor comments

Remove CME

• Did the candidate climb below the working and access clearance for the voltage being worked upon?

  Yes

  No

  N/A

• Caution notice removed?

• HV Gloves worn prior to removal of CME?

• CME Removed from all three phases?

• Site left tidy and equipment tidied away?

  Yes

  No

  N/A

• Assessor comments

Install cut-out

• correct tools and PPE selected for task

  Yes

  No

  N/A

• Cut-out secured to board,level and within the dimensions given.

  Yes

  No

  N/A

Install single phase cut-out CNE cable

• Service cable stripped to correct length

  Yes

  No

  N/A

• All terminations sufficiently tight

  Yes

  No

  N/A

• Was the neutral arranged neatly allowing the correct seating of the cut-out chamber

  Yes

  No

  N/A

• Service PME link installed

  Yes

  No

  N/A

• Grommets installed into bottom of cut-out chamber

  Yes

  No

  N/A

• Assessor comments

• Photo of cut-out

  Media

Install Three phase cut-out SCNE

• Cut-out level & secured to meter board<br>

  Yes

  No

  N/A

• Cable terminated in correct phase positions

  Yes

  No

  N/A

• Tape buffer installed at the crutch

  Yes

  No

  N/A

• Was the neutral arranged neatly allowing the correct seating of the cut-out chamber

  Yes

  No

  N/A

• All terminations sufficiently tight

  Yes

  No

  N/A

• Photo of cut-out

  Media

• Service termination PME link not installed

  Yes

  No

  N/A

• Chamber grommets installed

  Yes

  No

  N/A

• Assessor Comments

LV testing (single phase cut-out termination PME

• LV gloves checked and inflation test performed as per COP 684

  Yes

  No

  N/A

• Test lamps tested before use.

  Yes

  No

  N/A

• Non intrusive testing device (neutral ID pen) tested before use

  Yes

  No

  N/A

• Polarity confirmed using test lamps and non intrusive testing device (neutral ID pen).

  Yes

  No

  N/A

• Correct PPE selected<br>Eye protection arc resistent coveralls.

  Yes

  No

  N/A

• Each test completed with a positive indication (light)<br>Or confirmed with test lamp tester

  Yes

  No

  N/A

• Earth loop impedance checked and results understood

  Yes

  No

  N/A

• Incorrect (crossed) polarity identified

  Yes

  No

  N/A

• Knowledge affirming questions answered correctly

  Yes

  No

  N/A

• Assessor comments

LV testing (single phase cut-out termination non PME

• Test lamps tested before use.

  Yes

  No

  N/A

• Each test completed with a positive indication (light)<br>Or confirmed with test lamp tester

  Yes

  No

  N/A

• Polarity confirmed using test lamps

  Yes

  No

  N/A

• Earth loop impedance checked and results understood

  Yes

  No

  N/A

• Incorrect (crossed) polarity identified

  Yes

  No

  N/A

• Knowledge affirming questions answered correctly

  Yes

  No

  N/A

• Assessor comments

LV testing three phase open point

• Test lamps tested before use.

  Yes

  No

  N/A

• Each test completed with a positive indication (light)<br>Or confirmed with test lamp tester

  Yes

  No

  N/A

• Three phases and neutral identified each side of the open point

  Yes

  No

  N/A

• Open point phased out

  Yes

  No

  N/A

• Each given fault identified

  Yes

  No

  N/A

• Each test completed with a positive indication (light)<br>Or confirmed with test lamp tester

  Yes

  No

  N/A

• Assessor comments

• Assessor signature

  Sign

• Candidate signature

  Sign