Title Page
-
IHS Site ID
-
Installation Date
-
Installed By
-
QC Conducted on
-
Is the lock installable?
-
Why is it not installable?
-
Is the tower access door been welded shut? If yes then grind open.
-
If the tower access door has been grinded open, has the area been treated according to the IHS Paint Spec?
-
Is the locking mechanism of the door bent or cut?
-
Has the lock been bent back to alignment or welded on the cut portion?
-
Has the affected area been treated with coldgalv if the tower is galvanized or painted as per IHS spec?
-
Has the tower door been realigned for easy closing?
-
Is there a 6mm hole drilled 100mm away from the tower door locking mechanism?
-
Has the 6mm hole been cleaned and treated with coldgalv 10mm around the affected area?
-
Is the supplied chain to the tower door been secured by a flathead bolt and penny and spring washers on each side of the door?
-
Have all shear of nuts been sheared off and removed from site?
-
Have the bolts been flush cut with the shear off nuts, tac welded and treated with coldgalv?
-
Are the LED light visible when you press the button?
-
Has the site been locked (ABLOY SCREENSHOT and SITE VIDEO)
-
Has an overall video been taken of the site and work area?
-
Has the existing lock that was on site been returned to the Neocom offices?
