Title Page
-
Site conducted
-
Conducted On
-
Conducted By
-
For Project
-
Site Name
-
Serial Number
-
Operating Hours
-
Produced Electrical kW
-
Produced Thermal kW (if meter is installed)
-
Consumed Gas (if meter is installed)
-
Case No
Report
-
Electrical Panel Inspection
-
Change Engine Oil and Top Up Oil Reserve Tank
-
Change Oil Filter and Check Oil Switch
-
Inspect Generator Mounts and Connections
-
Check For Leaks
-
Check/Clean Coolant Filter
-
Check Air Intake
-
Check All Rubber and Steel Hoses
-
Check Electrical Lines
-
Check and Adjust Valve Clearances
-
Replace Valve Cover Gaskets
-
Check Battery if Present
-
Check/Adjust Throttle Valve
-
Check/Clean Gas Filter
-
Change Air Filters
-
Check Ignition Timing (degrees)
-
Check Primary Coolant Operating Pressure (mbar)
-
Check Crankcase Pressure (mbar)
-
Check Backpressure Including Catalytic Converter (mbar)
-
Check Engine Compression if Necessary (mbar)
-
Change Spark Plugs and Set Spark Gaps
-
Check Gas Line for Leaks
-
Check All Sensor Connections
-
Check Safety Valve
-
Check Expansion Vessel
-
Check Lambda Sensor (replace every 7500 hours)
-
Test RCD Switch (every 7500 hours)
-
Check/Clean Intercooler
-
Check Intercooler Operating Pressure (mbar)
-
Check CO Emissions (mg/m3)
-
Check NOx Emissions (mg/m3)
-
Notes
-
Parts Used
-
Photographs of Installation
-
Origen Engineer
-
Site Contact
