Information

  • Site conducted

  • Document No.

  • Audit Title

  • Property

  • Conducted on

  • Prepared by

  • Location

ROOF SHEETING / CLADDING

  • Inspect all claddings for deposition of debris, dust, pollutants & organic growth

  • Inspect for staining at possible ponding locations

  • Inspect for build-up of dust & debris

  • Inspect for metallic staining of gutters, surface rust & creases

  • Inspect for foreign materials used in plant, other installations (ie; treated pine, etc.)

  • General Condition

GUTTERS

  • Inspect for any debris & organic growth

  • Staining at possible ponding locations

  • Build-up of debris at the high end of box gutters

  • Build-up of leaves & debris along full gutter runs

  • Surface rust / metallic stains

  • Build-up of debris at rain heads, water spouts, overflow pops & downpipe entry points

  • General Appearance

DOWNPIPES

  • Inspect for cleanliness & free flow of water

  • Inspect for growth of fungus & other matter

  • Collect debris at both inlet & outlet

  • Test for blockage at each downpipe

  • General appearance

PENETRATIONS, FLASHINGS, CAPPINGS

  • Inspect for build-up of debris

  • Inspect for organic material located between flashings or cappings & the cladding materials

  • Inspect for staining of joints, specifically at high side of penetrations

  • General Condition

EXPANSION, SLIDE & END JOINTS

  • Inspect for build-up of debris

  • Inspect for organic material between jointed materials & cladding materials

  • Inspect expansion joints for build-up of debris & organic matter both above & below the flashing, against the overlapping & underlapping sheets respectively

  • General Condition

PLATFORMS & ACCESS WALKWAYS

  • Inspect for build-up of debris

  • Inspect high side of support frame for rust due to ponding

  • Inspect for metallic staining

  • Are there sufficient walkways & platforms

  • General Condition

UN-WASHED AREAS (eg; underside of gutters, etc.)

  • Inspect for build-up of dust

  • Inspect for build-up of debris

  • Inspect for build-up of airborne pollutant fall out

  • General Condition

FASTENERS

  • Inspect for deterioration of fastener head

  • Inspect for breakdown of rubber washers

GENERAL COMMENTS

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.