MAINTENANCE CHECKLIST
-
Location -Select from drop-down
-
Non-listed Location write here
-
Job Category
-
Conducted on
-
Prepared by - Technician name
-
Equipment name /Description etc-
-
Equipment asset number-
-
Equipment Brand/Model/Serial Number/etc.
-
Type of Equipments - Select from Drop-down
Equipment & checks during inspection
-
Operational test- carry out a full test on the machine.
-
Electrical- wiring, each conductor, isolation device, insulation/ continuity tests
-
Switches and contactors- check mechanical operation of all switches and contactors-
-
General inspection - Check physical condition of the equipment internal and external
-
Heating elements- Check current and for signs of corrosion, connections
-
Gas supply- Check correct pressure levels,gas valve, restraints
-
Flue-Check condition of the flue and clean as necessary
-
Pilot light - Check light, adjust if necessary
-
Ignition electrode - Check condition and reliability of operation, Clean as required
-
Thermocouple /flame failure - Check condition and correct shut down
-
Drain Valve and outlet- Check mechanical operation of drain valve and clear waste
-
Safety devices- Visually check all safety guards
-
Thermostat- Check capillary phia is correctly located and secure. Calibrate if necessary
Pictures
-
Before Pictures
-
After Pictures
Signature
-
Technician Signature
-
Incharge of the location
-
Technician comments
-
Media Summary
