Title Page
-
Job Site Checklist
-
Client / Site
-
Conducted on
-
Prepared by
-
Location
-
Foreman
Job Site Documentation
-
Current Job Site Startup Book
-
Access to Health & Safety Manual <br>
-
OSHA & State Required Posters
-
Worker's Comp Self-Insured Benefits/Certificate<br>
-
OSHA 300
-
Copy of SDS or Online SDS
-
Competent Person Certificate<br>
-
Emergency Posters Clearly Posted
-
Weekly Toolbox Talks
-
Daily JSA Completed
Personal Protective Equipment
-
Eye Protection per ANSI Z87
-
Face Protection ( Faceshields/Goggles )
-
Head Protection
-
Foot Protection
-
Hand Protection
-
Proper Work Clothing
-
Ear Protection
-
Is Hi-VIS Required
-
Is Additional PPE Required for the Job
Company Truck(s) & Equipment
-
Do the company truck(s) have the 1-866-Dunbar5 stickers
-
Are Truck(s) Suitable for Work
-
Are Lights & Safety Devices Working on the Truck(s)
Housekeeping & Sanitation
-
General Neatness of the Working Areas
-
Passageways/Walkways/Doorways Clear
-
Is Parking Lot Free of Hazards
-
Waste Container Provided & Used
-
Regular Disposal of Waste & Trash
-
Protection from From Protruding Nails
-
Sanitary Facilities Adequate & Clean
-
Adequate Supply of Drinking Water & Disposable Cups
-
Adequate First Aid Equipment on the Site & Accesible
-
Eye Wash Bottles
-
Adequate Safe Lighting
Fire Prevention / Protection
-
Fire Instruction & Evacuation Plan Given to Employees
-
Fire Extinguishers Identified, Checked, Visible & Accessible
-
Hydrants Clear, Access to Public Thoroughfare Open
-
Are "No Smoking" Signs Placed & Enforced Where Needed
-
Are "EXIT" Signs Present
-
Storage of Gasoline Products at Least 20' from Structures
-
Storage of Flammable & Combustible Products in Approved Container with Adequate Ventilation
-
Clearance, Proper Mounting, Ventilation for Temporary Heating
Electrical Safety
-
Is All Electrical Equipment Grounded & All Extension Cords of Proper Size & Condition
-
Are All Temporary Outlets, Tools & Equipment Protected by GFCI's or an Assured Equipment Grounding Program
-
Are All Terminal Boxes Equipped with the Required Covers
-
Are All Cords Elevated or Covered, Out of High Traffic Areas
-
Have Concealed Electrical Lines Been Located & Marked
-
Are All Electrical Hazards Identified & Labeled with Warning Signs
Material Handling & Storing
-
Are Forklift Operator License(s) Current
-
Are Safe Practices Followed During the Loading & Unloading of Material/Equipment
-
Have Employee(s) Recognized Pinch Points & Caught Between Hazards
-
Are Materials Properly Stored & Stacked in a Safe Manner
-
Are There the Proper Number of Employee(s) for the Material Handling
-
Is Traffic Controlled in the Storage Areas
-
Are Materials Protected from the Weather Conditions
-
Are Flammable Products Separated & Stored in Approved Storage Areas
-
Are All Containers Properly Labeled with Current SDS
Hand & Power Tools
-
Is the Proper Tool Being Used for the Job
-
Have the Hazard(s) of the Tool Been Recognized
-
Have Employee(s) Eliminated or Controlled the Hazard(s)
-
Are the Tools Being Used in the Proper Manner with Proper Body Positioning
-
Are the Tools in Good Condition, Properly Stored, Tagged & Removed from Service if Damaged
-
Are All Power Tools Properly Guarded
-
Are All Electrical Tools of a Three-Wire Type or DoubleI Insulated
-
Do All Pneumatic, Fuel, & Hydraulic Power Tools Have the Proper Safety Guards
Fall protection
-
Fall Protection Needed on the Job
-
Is Fall Protection Inspected
-
Is/Are Employee(s) Properly Trained in the Fall Protection
-
Is/Are employee(s) compliant with OSHA & Dunbar standards
-
Has the Swing Radius Been Account for
-
Is There a Rescue Plan
Welding & Cutting
-
Is There Welding on the Job
-
Is a Permit Required
-
Is Equipment in Operating Condition & Properly Grounded
-
Are Gas Lines in Good Condition & Have Back Flash Arrestors
-
Are Fire Extinguishers of the Proper Type & Located within 25'
-
Are Fire Blankets Required/Needed
-
Are Screens or Shields Being Used
-
Is Proper PPE Being Used
-
Are Cylinders Properly Stored Outside with Caps & a 5' Wall or 20' of Separation
-
Is There Proper Body Positioning & Ventilation Being Used
-
Are Gas Bottles Properly Secured
Ladders
-
Are Ladders Being Used on the Job
-
Are Ladders Inspected Before Use
-
Are Ladders Equipped with Safety Shoes
-
Are Non-Metal Ladders Being used Around Electricity
-
Are the Stepladders Only used in the Fully Open Position
-
Are Extension Ladders 3' Above the Landing Area, Proper Angle & Secured
Barricades
-
Are There Barricades on the Job
-
Is Traffic Controlled at the Site
-
Are Floor & Wall Openings Barricaded
-
Are Holes Covered & Labeled "Hole"
-
Are Barricades Placed at Least 5' from Hazard & Do They Completely Isolate Hazard
-
Are There Guard Rails
-
Is Top Rail 42" (+/-) 3", Mid Rail 21" (+/-) 3" & 4" Toe Board
-
Are Ropes used as Barricades & Flagged Every 6' <br>
-
Are Top & Mid Rail Support OSHA Horizontal Weight Requirements
Cranes, Hoist, & Derricks
-
Are Cranes Being Used at the Site
-
Are Inspections & Maintenance Logs Maintained
-
Has Rigging Been Inspected & in Good Working Condition
-
Do the Hooks Have Approved Latches
-
Is Rigging Properly Stored
-
Are Rigging Softeners Being Used Whe Needed
-
Has Pre Planning Been Completed
-
Has a Pre Lift Meeting Been Done
-
Are Power Lines Inactivated, Grounded, Removed &/or at a Safe Distance
-
Are the Proper Loading & Lifting Limits Being Observed
-
Are Signalmen Being Used & are Signals Understood, Observed & Posted
-
Are Tag Lines Being Used
Excavation
-
Is There an Excavation on the Site
-
Is There a Competent Person
-
Has 811 Been Called at Least 48 Hours Before the Dig
-
Has the Excavation Inspection Form & Checklist Been Completed
Respiratory
-
Is Respiratory Protection Needed on the Job
-
Are the Employee(s) Current on the Training & the Fit Test
-
Has the Hazard Been Recognized & has Training Been Done for the Hazard
-
Do Employee(s) Have the Proper Respirator & Filters
-
Do Employee(s) Have All Required Safety Supplies for the Job
Confined space
-
Is There Confined Space(s) on the Job
-
Are Employees Properly Trained
-
Has Competent Person Classified the Space
-
Has Competent Employee Completed all Necessary Paperwork
-
Have Employee(s) Barricaded/Controlled the Area
Scaffold
-
Is there Scaffold on the job
-
Are Employee(s) Trained on the Scaffolding
-
Does the Scaffold have the Proper Inspection Tag
-
Have Employee(s) Recognized Hazards Associated with the Scaffold
Dunbar Corrective Action
-
Any Corrective Action Required
Hazards or Violations caused by another Contractor
-
Are Employee(s) Exposed to Created Hazards
Concerns, Additional Equipment Needed or Pre-Planning Issues
-
Are There Issues Employee(s) need to improve <br>