Lift Inspection Check Sheet

• Building Name

• Lift Number

• Conducted on

  Date

• Prepared by

• Location
  Address

Machine Room

• Access Okay?

  Yes

  No

  N/A

• Lighting Okay?

  Yes

  No

  N/A

• Circuit Drawings Available?

  Yes

  No

  N/A

• Handwinding Tool Available?

  Yes

  No

  N/A

• Machine Room Tidy?

  Yes

  No

  N/A

• Controller Okay?

  Yes

  No

  N/A

• Sheaves Okay?

  Yes

  No

  N/A

• Brake Linings Okay?

  Yes

  No

  N/A

• Machine, Gearbox, bearings, generator Okay?

  Yes

  No

  N/A

• Governor Okay?

  Yes

  No

  N/A

Lift Well

• Rope, Fixings and Hitch Okay?

  Yes

  No

  N/A

• Guide Rails Okay?

  Yes

  No

  N/A

• Counterweight, Rollers and Guides Okay?

  Yes

  No

  N/A

• Sheaves Okay?

  Yes

  No

  N/A

• Door Locks, Rollers, Cables & Closers Okay?

  Yes

  No

  N/A

• Door Tracks, Guides & Kick Rollers Okay?

  Yes

  No

  N/A

• Door Openers Okay?

  Yes

  No

  N/A

• CWT Detector Okay?

  Yes

  No

  N/A

• Limit Switches Okay?

  Yes

  No

  N/A

Lift Car

• Operator, Locks & Oil Okay?

  Yes

  No

  N/A

• Lighting Okay?

  Yes

  No

  N/A

• Rollers Okay?

  Yes

  No

  N/A

• Controls and All Safety Switches Okay?

  Yes

  No

  N/A

• Telephone, Alarms and Signage Okay?

  Yes

  No

  N/A

• Door Protection, Buttons and Ventilation?

  Yes

  No

  N/A

• Floor Levels Okay?

  Yes

  No

  N/A

• Handrails Okay?

  Yes

  No

  N/A

• Fire Service Okay?

  Yes

  No

  N/A

Hydraulic

• Hoses, Pumps and Caisson Okay?

  Yes

  No

  N/A

• Anti Creep Okay?

  Yes

  No

  N/A

• Manual Lowering Okay?

  Yes

  No

  N/A

• Pit Props Okay?

  Yes

  No

  N/A

• Is a counterweight screen present?

  Yes

  No

  N/A

• Is a pit screen present between 2 lifts?

  Yes

  No

  N/A

• Is full shaft screening present if lifts are within 500mm of each other?

  Yes

  No

  N/A

• Is a safe pit ladder or pit access door present?

  Yes

  No

  N/A

• Is a mushroom type stop switch available at bottom landing door and in the pit?

  Yes

  No

  N/A

• Is shaft lighting installed?

  Yes

  No

  N/A

• Is a gap between the outer edge of the lift car roof and adjacent wall less than 300mm or a cartop safety rail installed?

  Yes

  No

  N/A

• Is a Inspection control saation fitted to the car roof?

  Yes

  No

  N/A

• Does all car and counterweight sheaves have sutiable guarding and rope keeper devices?

  Yes

  No

  N/A

• Does the governor tension device have a slack rope switch?

  Yes

  No

  N/A

• Is a rupture vavle present (hydraulic lifts only)?

  Yes

  No

  N/A

• Is the counterweight bracket spacing small enough?

  Yes

  No

  N/A

• Is a Counterweight displacement sensor fitted?

  Yes

  No

  N/A

• Is there safe access to the machine room?

  Yes

  No

  N/A

• Is the machine room lighting suitable?

  Yes

  No

  N/A

• Is the SWL signage on the lifting beam?

  Yes

  No

  N/A

• Does all drive and diverter sheaves have suitable guarding and rope keepers?<br>

  Yes

  No

  N/A

• Is the main switch lockable?

  Yes

  No

  N/A

• Are all required notices present - car laod plate, alarm instructions & motor room danger sign?

  Yes

  No

  N/A

• Does the lift have fire service operation?

  Yes

  No

  N/A

• Is an electronic door detector fitted?

  Yes

  No

  N/A

• Does all landing doors have release mechanisims?

  Yes

  No

  N/A

• Is a hands free phone fitted

  Yes

  No

  N/A

• Is a EM light unit fitted?

  Yes

  No

  N/A