Livv Maintenance - Electrical QA Post Inspection

• Name of auditor carrying out Electrical QA post inspection

  Robert Forsyth

  Tommy Kenwright

  Jack Fenlon

• Date of inspection

  Date
• Inspection location
  Address

• Scope of electrical works that have been carried out at this location?

  Select Cyclical Electrical Testing Empty Homes Electrical Works Electrical Responsive Works Full Electrical Rewire Smoke Alarm Installation Other

  • Cyclical Electrical Testing
  • Empty Homes Electrical Works
  • Electrical Responsive Works
  • Full Electrical Rewire
  • Smoke Alarm Installation
  • Other

• Give a brief description of works carried out

• Contractor who carried out the works

  Select Livv Maintenance Elect Building and Maintenance All Safe Trades UPS Building and Maintenance Cannon Elec

  • Livv Maintenance
  • Elect Building and Maintenance
  • All Safe Trades
  • UPS Building and Maintenance
  • Cannon Elec

• Operative who carried out the works

• Initial works completion date

  Date

• Livv Housing Group job number

• Is there any damage to service cut out/metering equipment?

  No

  Yes

  Not Inspected

• Has this been reported to DNO/energy supplier?

  Yes

  No

  N/A

• Does the earthing system match what is identified on the certification?

  Yes

  No

  Not Inspected

• Are the main protective bonding conductors in place and adequately sized?

  Yes

  No

  Not Inspected

• Are the meter tails adequately supported?

  Yes

  No

  N/A

• Does the consumer unit have all required labelling/notification on it?

  Yes

  No

  N/A

• Does the consumer unit have all required blanks in place and meet the minimum IP requirements?

  Yes

  No

  N/A

• Is there any evidence of thermal damage within the consumer unit?

  No

  Yes

  N/A

• Has the relevant electrical certification been issued and completed correctly?

  Yes

  No

  Not Required

• Is the measured Zdb and PFC satisfactory for the type of earthing system in place?

  Yes

  No

  Not Tested

• Has this been reported to the DNO?

  Yes

  No

  N/A

• Please inform DNO immediately

Socket Circuit

• Are the electrical power outlets/accessories visually in an acceptable condition?

  Yes

  No

  Not Inspected

• Are the readings recorded by the electrician within acceptable tolerance of what is measured today by the auditor?

  Yes

  No

  Not Tested

Lighting Circuit

• Are the lighting accessories visually in an acceptable condition?

  Yes

  No

  Not Inspected

• Are the readings recorded by the electrician within acceptable tolerance of what is measured today by the auditor?

  Yes

  No

  Not Tested

• Does the RCD trip within 300ms and does the test button operate the device?

  Yes

  No

  N/A

Cooker Circuit

• Are the cooker outlets visually in an acceptable condition?

  Yes

  No

  Not Inspected

• Is the electrical wiring from the cooker outlet to the cooker connection to an acceptable standard?

  Yes

  No

  Not Inspected

• Are the readings recorded by the electrician within acceptable tolerance of what is measured today by the auditor?

  Yes

  No

  Not Tested

• Does the RCD trip within 300ms and does the test button operate the device?

  Yes

  No

  N/A

Shower Circuit

• Is the shower unit and isolation switch visually in an acceptable condition?

  Yes

  No

  Not Inspected

• Is the isolation switch in the correct wiring zone as defined within special locations in BS7671?

  Yes

  No

  Not Inspected

• Are the readings recorded by the electrician within acceptable tolerance of what is measured today by the auditor?

  Yes

  No

  Not Tested

• Does the RCD trip within 300ms and does the test button operate the device?

  Yes

  No

  N/A

Other Circuit

• Circuit designation

• Are the electrical accessories that are part of this circuit visually in an acceptable condition?

  Yes

  No

  Not Inspected

• Are the readings recorded by the electrician within acceptable tolerance of what is measured today by the auditor?

  Yes

  No

  Not Tested

• Does the RCD trip within 300ms and does the test button operate the device?

  Yes

  No

  N/A

• Are all detectors installed in the correct locations?

  Yes

  No

  N/A

• Are the CO detectors installed in the correct locations?

  Yes

  No

  N/A

• Has a smoke alarm control unit been installed in a suitable location?

  Yes

  No

  N/A

• Do all detectors sound when test button is pressed?

  Yes

  No

  N/A

• Was the customer kept informed of the works to be completed?

  Yes

  No

• Did the electrician identify themselves with ID badge before starting works?

  Yes

  No

• Did the electrician keep the property clean and tidy whilst carrying out the works?

  Yes

  No

• Please report to Electrical Managers.

• Was the customer happy with the works that were carried out?

  Yes

  No

• Give a brief description of why the customer is unhappy with the works carried out

• Please report to Electrical Managers.

• Are there any further comments from the customer?

  No

  Yes

• Does the auditor have any other observations or recommendations to report?

  No

  Yes

• Does the auditor have any further comments?

  No

  Yes

• Outcome of Electrical QA post inspection

  Pass

  Fail

• Auditor Signature

  Sign