Title Page
-
Document No.
-
Audit Title
-
Client / Site
-
Conducted on
-
Prepared by
-
Location
-
Personnel
-
Before new abrasive wheels are mounted, are they visually inspected and ring tested?
-
Do side guards cover the spindle, nut, and flange and 75 percent of the wheel?
-
Are the spark arrestors on the topside of the grinder used and kept adjusted to within 1/4 inch (6.5mm) of the wheel?
-
Are the eye shields in place and in good working condition?
-
Is the work rest used and kept adjusted to within 1/8 inch (3mm) of the wheel?
-
Are all abrasive wheel rpm rated for the rpm of the grinder motor? The grinder motor rpm should not exceed the wheel rating.
-
Is grinding on the side of the wheel prohibited?
-
Are bench and pedestal grinders permanently anchored?
-
Is there a face shield available and its use required when the grinder is used?