Information
-
Document No.
-
Audit Title
-
Client / Site
-
Conducted on
-
Prepared by
-
Location
-
Personnel
Training & Documentation
-
New employees have completed orientation.
-
Equipment operator(s) - Documentation is available to show operator has been trained to operate the unit.
-
Hazardous Communication - Employees know where MSDS's are located
-
Hazardous Communication - Employee has appropriate level of training for the work they are performing.
-
Housekeeping - Work area clean and uncluttered. Trash picked up and disposed of daily.
-
Pre-task paperwork is complete and correct. Crew have correct permits.
-
Postings - Are required posters and signs on-site. (Can be in job trailer or office)
Personal Protective Equipment
-
Fall protection - Harness & Lanyard / Monthly inspection (Documented) / No more than 5 years old
-
Gloves - Right kind for the job / is the crew using them
-
Hearing Protection - Available & used / right type for the work
-
Mask - Right kind for job / crew using them
-
PPE (Special) - is there
Equipment
-
Aerial lift(s) - Daily inspection
-
Air Compressor(s) - Daily Utility Equipment Inspection
-
Crane(s) - Daily inspection
-
Forklift(s) / Lull(s) / Front-end loader(s) - Daily inspection
-
Generator(s) - Daily Utility Equipment Inspection
-
Ladder(s) - Daily visual inspection. Documented on Pre-task paperwork
-
Scaffolding - Daily inspection / Tag filled out by Competent Person
Rigging
-
Carabineer(s) - Visually inspected. Documented on Pre-task paperwork.
-
Cargo strap(s) - Visually inspected. Documented on Pre-task paperwork.
-
Chain falls - Visually inspected. Good working clips on hooks. Documented on Pre-task paperwork.
-
Shackle(s) & Hook(s) - Visually inspected. Documented on Pre-task paperwork.
-
Sling(s) - Visually inspected. Documented on Pre-task paperwork.
-
Wire sling(s) - Visually inspected. Documented on Pre-task paperwork.
Tools
-
Electrical cord(s) - Visual inspected before use / no cuts in outer sleeve / ground pin not missing / outer sleeve not pulled loose from ends.
-
Tool(s) Electrical - Visual inspected before use / no cuts in outer sleeve / ground pin not missing / outer sleeve not pulled loose from end.
-
Tool(s) Hand- Visual inspection before use
-
Tool(s) Pneumatic - Visual inspection before use / not leaking / either pinned or whip-checked when in use
-
Pneumatic hose(s) - Visual inspection before use / good condition, not leaking when in use
Welding
-
Arc welding machine - Visual inspection of unit before use. Documented on Pre-task paperwork.
-
Gas welding bottles / hoses / gauges - Visual inspection of unit before use. Documented on Pre-task paperwork.
-
Gas cylinders - Properly stored and secure when not in use.