Title Page
-
Conducted on
-
Prepared by
Description of the Job
-
Foreman in Charge:
-
Today’s Date:
-
Jobsite Location:
-
Crew Members:
- Kenny
- Josh
- Chris
- Zack
- Sawyer
- Jason
- Doug
- John
-
Describe Type of Work Being Performed:
-
Are the Lines Energized or De-energized:
-
Distribution, Secondary, Both:
-
Overhead or Underground:
Job Preparation
-
Tailgate Conducted & Documented:
-
Location Given to Dispatch:
-
Energy Source Controls Identified & Set to Non-Reclose:
-
Hold Cards Placed:
Personal Protective Equipment
-
Hard Hats Worn & in Good Condition:
-
Eye Protection ANSI Approved & Worn:
-
Proper Hand Protection is Being Used:
-
Safety Toe Boots are Being Used:
-
Hearing Protection is Available:
-
FR Clothing is in Good Condition:
-
Rubber Gloves/Sleeves Worn & Inspected Before Use:
-
Fall Protection Used & Inspected Before Use:
Grounding
-
Truck Grounds are Being Used & in Good Condition:
-
Personal Grounds are Being Used & in Good Condition:
-
Conductor was Tested Prior to Grounds Being Installed:
Vehicles
-
Digger/Bucket Trucks are Properly Set Up:
-
Wheel Chocks are Being Used:
-
Outrigger Pads are Being Used:
Traffic Control
-
Strobe Light are in Working Order & Being Used:
-
Traffic Cones are Being Used:
-
Roads Signs are Adequate for the Job Being Performed:
-
Reflective Vests are Worn:
General Work Practices
-
Proper Tools are Being Used to Complete the Task:
-
Live-Line Tools Have Been Inspected Prior to Use & Tested Within 1 Year:
-
Hand Line are Available & in Good Condition:
-
Poles are Tested Prior to Climbing:
-
Adequate Cover-Up Materials are Being Used & Properly Covered/Isolated:
-
Only Qualified Personnel are Performing Hazardous Work:
-
Employees Performing Hot Work are Being Watched by a Designated Observer:
-
Clear Communication is Exchanged Among Crew Members:
-
Employees can Explain Direction of Feed & Closest Protection Device:
Auditor Verification Signatures
-
Safe Jobsite:
-
Safe Work Procedures Followed:
-
Include Photos if Applicable:
-
Signature:
-
Signature:
-
Signature: