Information

  • Audit Title

  • Document No.

  • Client / Site

  • Conducted on

  • Prepared by

  • Location
  • Personnel

  • Partition QA first fix

  • Setting out correct?

  • Specification correct ?

  • Door Opening and jambs and heads correct.?

  • Wall type correct ?

  • Fixings at correct centres ?

  • Apertures formed correctly and lined if required ?

  • Hand over for 1st fix M&E.

  • Snags to be rectified, photos attached

  • Works accepted by client/ builder

Noggins marked by others

  • Noggins marked by others

  • Noggins installed as per marks

  • Correct height, width and depth of noggin used

  • Hand back to M&E

All services installed and handover to measom

  • Electrical

  • Mechanical

Measom 2nd fix

  • Handover received from previous trades

  • Correct screw centres

  • Bottom and top of board screwed to maintain centres

  • Insulation-correct type and fixed correctly if required?

  • Penetrations neat and within tolerance ?

  • No visible damage to boards.

  • Handover.

Tape and joint.

  • Check for damage and repair

  • Paper tape used to internal corners.

  • Externals have corner beads fitted correctly.

  • All reveals and columns square.

  • 1coat of filler and 2 coats of joint cement used.

  • Top coat and sanding done to a good standard.

  • Handover to next trades.

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.