MIRVAC KSU ITP

Welcome

Underground Conduit Installation

Project- Kawana Shopping Centre
Project # 1900
Client-Mirvac
ITP Number
Discipline
Drawing reference
Date ITP commenced

ITP

Underground conduit installation

Location and Description
Check for latest drawings and co-ordinates
Compliance Criteria - Drawings Civil and electrical
Drawing number and rev
Hold point- No
Method of inspection- Visual, Administrate
Person responsible- Supervisor or Foreman
Name
Date
Excavate to required depth in accordance with relevant trench cross section
Compliance Criteria - Drawings Trench cross section, HV Longitudinal section, Datum Point
Hold point- No
Method of inspection- Visual, Measurement
Person responsible- Foreman or Leading Hand
Install conduits low level
Compliance Criteria - Drawings and Electrical Specification
Hold point- Yes
Method of inspection- Visual or Photographic
Photos as required
Photo
Person responsible- Leading Hand
Name
Date
Back fill trench low level
Compliance Criteria - Electrical Specification
Hold point- No
Method of inspection- Visual or Measurement
Person responsible- Leading Hand
Name
Date
Install Electrical or Communications marker tape at correct height. Back fill with required back fill to designated height- IF LEAN MIX USED SEPARATE ITP REQUIRED
Compliance Criteria - Electrical Specification
Hold point- No
Method of inspection- Visual or Measurement
Person responsible- Leading Hand
Name
Date
Compact Trench
Compliance Criteria - Electrical Specification
Hold point- No
Method of inspection- Visual or Test
Person responsible- Leading Hand
Name
Date
Submit to MIRVAC- ITP, Relevant Mark Up drawing indicating area trenched and compaction test
Compliance Criteria - Electrical Specification
Hold point- No
Method of inspection- Visual or Test
Person responsible- Leading Hand
As-built drawing
Compaction test
Name
Date