MYNT WA QA Pre-Dispatch Checklist

• Inspection Started on

  Date

• Prepared by

• Location
  Address

• Inspection Number

• Customer

• PO Number

• Customer Contact Name

• Customer Contact Number

• Customer Contact Email

• Delivery Date Agreed time

  Date

• Make & Model

• Serial Number (Take clear picture of plate)

• Engine Number

• Has the customer allocated a Fleet Number

• MYNT Sales Rep

Inspection Checklist

Pre-Ignition Checks

• Fuel Level

  Minimum Testing Level only

  Full

• Engine Oil Level is correct

  Yes

  No

• Fuel Filter and System is free from leaks and obvious contaminants

  Select

• Fan Belts are taught and free from nicks and damage

  Yes

  No

• All wiring tidy and secure

  Yes

  No

• Electrical Connections Tight and labelled

  Yes

  No

• All mechanical guards are in place

  Select

• Coolant fluid levels are correct

  Yes

  No

• AC Terminal Nuts and Bolts fitted

  Yes

  No

• Terminal Covers are safe and secure

  Yes

  No

• No Exposed live conductors / Terminals

  Select

• Is Modoken installed (where applicable) - take a picture of serial of modoken unit

  Yes

  No

  N/A

Control Panel Checks

• Engine Gauges all Operational

  Compliant

  Non-Compliant

  N/A

• Volt / amp / Frequency Gauges all operational

  Compliant

  Non-Compliant

  N/A

• Speed Adjusted and Stable

  Compliant

  Non-Compliant

  N/A

• Voltage Adjusted and Stable

  Compliant

  Non-Compliant

  N/A

• Check main breaker size and functional

  Compliant

  Non-Compliant

  N/A

• Check Voltage Regulator

  Compliant

  Non-Compliant

  N/A

• Check Earth leakage settings

  Compliant

  Non-Compliant

  N/A

• Solar Panel is installed and charging battery

  Yes

  No

Technician Confirmation for Electrical Contractor 88811

• Any additional comments on the machine or items to Note

• I confirm I have completed built this machine to Australian Standards and expectations. The machine's safety and compliance checks are all OK as seen today unless otherwise noted.

• Electrician Information

  Jason Merks - EW167009

  Vishal Sen - EW165340

  Steven Vycemillo - EW114558

• Service Technician and Signature

  Sign

Labels Installed

• MAIN SWITCH

• MEN Point

• EARTH LEAKAGE RELAY

• EMERGENCY STOP

• BATTERY ISOLATOR

• STARTER ISOLATOR

• DANGER 415V / 240V

• MYNT Servicing record sticker

• Outlets and RCBO's Labeled with amperage correctly

• All warning labels are intact and clearly visible

Visual Inspection

• Is there any signs of damages or scratches

  Yes

  No

  N/A

• Supply photos of external - All 4 sides

  Media

• Supply photo of the Fuel cap (inside door)

  Media

• What outlets are on the machine and take a picture?

  Media

• Supply a photo of Electrical RCD Trip times results

  Media

• Supply a photo of Completed Test and Tag Sticker

  Media

• Does the machine require a Fire Extinguisher and is it in date, take a photo if needed.

  Yes

  No

  N/A

• There are no loose external bolts on any external panels or skid base

  Compliant

  Non-Compliant

  N/A

• Control Panel bolts are checked and secure

  Compliant

  Non-Compliant

  N/A

• Check Electrical Outlets are free from damage (No ingress points, UV Cover fitted, All pips installed etc)

  Select

• Earth Stake is fitted when needed

  Yes

  No

  N/A

• Machine has the appropriate Mynt and Make/Model stickers

  Yes

  No

• Machine Has the appropriate Customer Decals (where needed)

  Yes

  No

  N/A

• 3-way Valve installed

  Yes

  No

Paperwork

• Is the manual and log book stored within the machine?

  Yes

  No

• Modoken is communicating with the portal and programmed to correct Model

  Yes

  No

  N/A

Ignition Tests

• Beacon is installed and operational

  Yes

  No

• Hour Read of the machine

• Emergency stop is installed and function correctly - preventing start and turning off machine

  Select Prevents Start Stops Engine / Machine Faulty / Not compliant

  • Prevents Start
  • Stops Engine / Machine
  • Faulty / Not compliant

• Isolators are installed and functioning correctly - preventing start

  Prevents Start

  Stops Engine / Machine

  Faulty / Not compliant

Final Confirmation

• Inspection Completed on

  Date

• Is the machine locked with an external panel door Key taped to the EXTERNAL machine

  Yes

  No

• Take a photo of the QA Seal fitted

  Media

• MYNT Sales Rep notified to send QA Email

  Yes

  No

  N/A