Title Page
FALL PROTECTION
-
Are guard rails present at all perimeters/shafts?<br>
-
Contact responsible party immediately. Keep a safe distance from hazard and instruct others to avoid hazard.
-
Are ladders inspected and in good condition?<br>
-
Tag ladder out of service and inform foreman and tool room.
-
Is fall protection equipment inspected and in good condition?
-
If repairable, tag out of service and inform foreman and tool room. If not repairable, destroy so it will not be used and dispose. Inform foreman and tool room.
-
Are PFAS anchor points capable of holding 5000 lbs. per person?
-
Stop personnel immediately. Inform foreman. Coach employees on proper anchor points. Issue infraction(s) if appropriate.
-
Are holes > 2" protected?
-
Inform foreman. Tape area off if appropriate.
PERSONAL PROTECTIVE EQUIPMENT
-
Is all required PPE available for use?
-
Assist foreman with obtaining proper PPE.
-
Is PPE being worn at all times by employees?
-
Inform foreman and issue WRITTEN infraction.
ELECTRICAL
-
Is temporary power out of the way of our work?
-
Inform foreman and assist with coordination with electrical contractor if requested.
-
Are extension cords elevated to avoid tripping hazards?
-
Inform foreman and consider use of zip ties, J-hooks or other no conductive means to elevate cords.
-
If permanent power is being used, are GFCI pigtails being used?
-
Inform foreman and assist with obtaining GFCI pigtails if necessary.
TOOLS
-
Are auxiliary handles present on tools where they are required?
-
Inform foreman. If handle is not readily available, confiscate tool until handle can be replaced. Assist foreman with obtaining replacement handle if requested.
-
Are pipe vises being used for cutting?
-
Inform foreman. Coach employees to use proper cutting techniques.
-
Are cords on tools original from factory?
-
Inform foreman and tool room. Confiscate tool, tag it out of service and return to tool room for repair.
HOUSEKEEPING
-
Is the area free of trash & trip hazards?
-
Inform foreman. Assist with clean-up efforts.
-
Are barricades/tape/signs maintained?
-
Inform foreman. Assist with taping and signs.
-
Is there enough light to see clearly?
-
Inform foreman. General Contactor/Electricians are responsible for providing area lighting. We are responsible for task specific lighting.
MATERIAL HANDLING
-
Are carts being used to move materials?
-
Add media
-
Are materials being stored on carts?
-
Is the area free of excess materials?
-
Has rigging been inspected?
-
Inspect rigging.
-
Is material handling equipment such as roustabouts or duct jacks inspected?
-
Use equipment checklists to complete inspections.
-
For Genie duct jacks, are Genie extensions the only ones being used?
-
Inform foreman. Confiscate illegal extensions. Note: Vermette jacks allow use of pipes/units rut.
FIRE PREVENTION
-
Are flammable materials being stored in a flammable cabinet?
-
Inform foreman. Assist in moving flammables to proper storage.
-
Has welding equipment been inspected?
-
Inform foreman.
-
Is there a fire watch present for hot work activities?
-
Inform foreman. Ensure fire watch is present for hot work.
-
Are fire extinguishers inspected?
-
Inform foreman. Assist with inspecting and/or tagging extinguishers.
-
Are gas cylinders secured from falling?<br>
-
Inform foreman. Assist in securing cylinders.
WHAT ARE THE 3 MOST DANGEROUS THINGS YOU SAW?
-
Decription:
-
Add media
-
Where is it located?
-
Description:
-
Add media
-
Where is it located?
-
Description:
-
Add media
-
Where is it located?