Nsi CCTV Maintenance Audit

• Document No.

• Client / Site

• Conducted on

  Date

• Prepared by

• Location
  Address

• Personnel

• Maintenance date

  Date

ADMINISTRATION

• 1.1 Was the service visit carried out at the correct time, ie within the 4 hours to time agreed for fault call, or at the due date for routine inspection?

  yes

  no

  n/a

• 1.2 Was the visit recorded on the correct documentation?

  yes

  no

  n/a

• 1.3 Was the documentation completed correctly and signed by the customer? (Where possible, check to see if copy was left with customer)

  yes

  no

  n/a

• 1.4 If any temporary disconnections have been made, have they been authorised by the customer, and have arrangements been made for a follow up visit? If disconnection was permanent has ths been specifically agreed with customer?

  yes

  no

  n/a

SITE- ENGINEER PRESENT

• 2.1 Did the engineer have/show ID card?

  yes

  no

  n/a

• 2.2 Did the engineer inform the customer that the system was being worked on and that the audible alarms may be tested? Establish, with customer, whether there had been any problems with the system (Maintenance only)?Advice the customer of any limitations on the system while testing in progress.

  yes

  no

  n/a

• 2.3 Did the engineer gather all relevant information to help in finding any possible fault(s)? Ie reference to log book & historical record?

  yes

  no

  n/a

• 2.4 Were appropriate techniques used in finding the fault in a reasonable time, and was the customer informed of the findings?

  yes

  no

  n/a

• 2.5 Were repairs properly carried out and tested, or was the system made safe pending a follow up visit?

  yes

  no

  n/a

• 2.6 (Maintenance Only) Did the engineer check the installation meets the as fitted documentation?

  yes

  no

  n/a

• 2.7 (Maintenance only) Were all flexible connections checked?

  yes

  no

  n/a

• 2.8 (Maintenance only) Were all supply voltages correctly checked at all appropriate parts of the system.

  yes

  no

  n/a

• 2.9 (Maintenance only) Were all control equipment checked for correct operation?

  yes

  no

  n/a

• 2.10 (Maintenance only) Were interfaces checked(if installed).

  yes

  no

  n/a

• 2.11 (Maintenance only) Have notices been provided/installed(if installed)

  yes

  no

  n/a

• 2.12 (Maintenance only) Have indicator lamps been checked(if fitted)?

  Yes

  No

  N/A

• 2.13 (Maintenance only) Were mains supplies tested, disconnected for standby tested(if required)?

  Yes

  No

  N/A

• 2.14 Did the engineer use appropriate test equipment and was it in calibration date?

  Yes

  No

  N/A

• 2.15 Did the engineer check that the customer was familiar with the operation of the system, or was additional training offered?

  Yes

  No

  N/A

• 2.16 Has the system historical card/log book etc, been completed with details of visit?

  Yes

  No

  N/A

SITE- ENGINEER NOT PRESENT

• 3.1 Does the installation still reflect the as fitted documentation? If not Has the appropriate indication of the difference been entered into the maintenance sheet?

  yes

  no

  n/a

• 3.2 Has there been any changes to the premises which require additional protection to maintain the system design?

  yes

  no

  n/a

• 3.3 Are there any deviations to standards/codes of practice which have not been identified by the visiting engineer?

  yes

  no

  n/a

• 3.4 Has the system historical card/log book etc, been completed with details of the visit?

  yes

  no

  n/a

TRAINING REQUIREMENTS

• Have any training requirements been identified?

  yes

  no

  n/a

• Auditor signature

  Sign