Title Page

  • Plant ID number:

  • Make:

  • Model:

  • Serial Number of machine

  • Machine working hours at time of audit:

  • Job Site Location:

  • Location:
  • Conducted on:

  • Conducted by and Oakdale Position:

Visual Inspection Checklist:

  • Has a Log Book been provided and in use?

  • Are compliance / ID plates fitted to the plant & legible?

  • Is the reverse / motion beeper functioning and audible?

  • Is the flashing light fitted and functioning?

  • Are tyres properly fitted and in safe and operable condition?

  • Are safe work limits (ratio of gradients) clearly identified (refer to operator's manual)

  • Is the safe Working Load (SWL) or Working Load Limit (WLL) clearly marked?

  • Are all controls clearly labelled/marked and operating including emergency stop, emergency lowering device, "deadman"controls, motion controls and horn? <br>*Check both ground control panel and platform control panel<br>*Check the operator joystick or lever is guarded to prevent inadvertent activation

  • Are there no obvious visible signs of oil or hydraulic leaks to any components?

  • Are all hot surfaces (e.g: engine & exhaust) and rotating/ moving parts (e.g: nip/ pin points) adequately guarded?

  • Is the working platform in good condition and free of obvious damage and corrosion e.g: floor, handrails and frame?

  • Is the personal access gate self-locking and operating?

  • Is the plant exhausts free of excessive pollutants or is the unit electrically tested and tagged?

  • Is the scissor structure and associated components free of obvious visual damage, distortion, corrosion,rust or wear and tear?

  • Are stabilisers/outriggers free of damage, cracking, distortion or excessive wear?

Engine:

  • Check condition of oil filter

  • Check security of battery

  • Engine Oil (Within operational limits)

  • Coolant (Within operational limits)

  • Hydraulic Oil (Within operational limits)

  • Oil leaks (No stipulates there are leaks present)

  • Fan belt

Exterior

  • Wheel nuts tight

  • Check steering

  • Are all lights operational

  • Compliance Plate

  • Log Book

  • Front

  • Left side

  • Rear

  • Right side

  • Cabin

Name, Signature, Date and comments:

  • Add signature

  • Comments

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.