Title Page

  • Site conducted

  • Conducted on

  • Inspection Carried out by

Vehicle Cab

  • FENZ LMR

  • DLMRTS Radio

  • ICOM Air Band Radio

  • DLMRTS Hand Held Radios x4

  • NZAP 6005.30-1 (Engineering Practises & Procedures, Hazardous Item ID & Checklist: Aircraft Crash Site)

  • BIOEX ECOPOL A3+F3 - SDS

  • PK Dry Chemical Powder - SDS

  • Overweight Permit - In Date

  • Vehicle First Aid Kit

  • Box of nitrile gloves x2

  • Personal Lines x4

  • Ear plugs - QTY

  • P2 dust masks - QTY

  • Handheld torch (nightstick intrinsically safe) x4

  • Portable Scene Light (Nightstick intrinsically safe)

  • SCBA (Draeger PSS5000) x4 sets

  • SCBA Spare Cylinders x4

Near side - Locker 1

  • FENZ Resus Pack / Trauma Pack Complete

  • AED (Cardiac Science) c/w Carry Bag

  • Line - Rescue (Black 12.5mm 45m)

  • Line - General Purpose (Blue 11mm x 30m)

  • Tarpaulin

  • Fire Blanket

  • Air-Purifying Respirator (APR) adaptors c/w Filters x4

  • Foam Aeration Tube (Elkhart 252-8 Bumper Turret)

Near side - Locker 2

  • Branch - Cross Lay (Elkhart Chief 1.5” FNHT 360LPM/95GPM @700kpa)

  • Hose - Cross Lay 45mm x 15m Yellow (1.5” NHT)

  • Branch - Structural (TFT G-Force 110-570LPM @500kpa 1.5” FBSP) x2

  • Hose Reel c/w Rewind handle & Branch (Elkhart Chief 475LPM / 125GPM @ 700kpa)

Near Side - Locker 3

  • Foam Branch - Cross Lay (Ally Tech 1.5” FNHT 225-475LPM @ 690kpa)

  • BA Entry Control Board c/w ECO Jerkin

  • Additional foam system handles x2

Off Side - Locker 1

  • DCP hose reel c/w Nozzle & Rewind Handle

Off Side - Locker 2

  • Branch - Cross Lay (Elkhart Chief 1.5” FNHT 360LPM/95GPM @700kpa)

  • Hose - Cross Lay 45mm x 15m White (1.5” NHT) x 4

  • Husqvarna Power saw (K 970)

  • Power saw Spare Blades x2

  • 5L Fuel Can (2 stroke)

  • Holmatro Combi Tool (PCT14) c/w battery

  • Various Chocks & Wedges 28pc

Rescue Tool Board c/w

  • Halligan Bar (30” Forged Type)

  • Axe Large (type non-conductive)

  • Axe Small (type non-conductive)

  • Bolt Cutters 60cm (type non-conductive)

  • Wrecking Bar (32”)

  • Oscillating Saw c/w Battery & Blade

  • Reciprocating saw c/w battery

Large Tool Box c/w

  • Lump Hammer 1.8kg

  • Claw Hammer

  • Hacksaw Heavy Duty c/w 2 spare blades

  • Wrecking Bar (12”)

  • Screw Driver Set - 4 Slotted 2 Phillips (6pc)

  • Insulated Side Cutting Pliers

  • Insulated Combination Pliers

  • Insulated Slide “point” Pliers

  • Seat Belt / Harness Cutting Tool (J Knife)

  • Wrench Adjustable (30cm)

  • Spanners Combination Set (8mm - 22mm)

  • Socket Set 64pc

  • Cable Cutters

  • Shovel (emergency)

  • Cold Chisel

  • STORZ Suction Spanners

Small Tool Box c/w

  • Ryobi battery 4AH

  • Ryobi battery 2AH

  • Ryobi battery charger

  • Oscillating saw blades x2

  • Spare Holmatro battery

  • Recip blades 150mm x6

  • Recip blades 200mm x5

Off Side - Locker 3

  • CO2 Extinguisher 5 kg

  • DP Extinguisher 9kg

  • Crow Bar (52” Fire Dept)

  • Standpipe, Key & Bar

  • Hose (70mm x 25m) x3

  • Hose (45mm x 30m) x2

  • Hose Cross Lay 45mm x 15m White

  • Hose Cross Lay 45mm x 15m Yellow

  • Nitrogen Cylinders (size G) c/w Lifting Rings x2

Exterior / Rear / Roof

  • Rescue Ladder (AS Fire 9M TX)

  • Access Ladder (Little Giant Mod 17-Short)

  • Suction Hose (3m x 100mm STORZ) x2

  • Suction Strainer (100mm STORZ)

  • D Shackles (Yellow) x4

Declaration

  • By signing this inspection sheet you declare that it has been carried out fully and all information is true and correct.

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.