Information
-
Document No.
-
Audit Title
-
Client / Site
-
Conducted on
-
Weather
-
Prepared by
-
Location
-
Personnel
CHECK SUPPORT SYSTEMS
-
The structure is able to support the loads ?
-
The tie back rope is properly tied off?
-
The outrigger is of proper design and correctly assembled?
-
The number of counterweights are correct for the overhang load?
-
All beams,clamps and hooks are correctly tied back?
-
Sockets and davits are correctly secured?
SUSPENSION UNIT
-
All parts (rails,rungs,deck,bumper rollers, welds,connections ,toe boards/guardrails,stanchions) of the stage/cage/chair have been checked to make sure that they are safe and will not break or come loose?
-
The stirrups or connections and their parts have been checked and are safe?
-
The capacity plate showing the maximum load will not be exceeded?
-
The stage stirrups are in line with the roof supports?
HOIST COMPONENTS
-
The manufactures operating instructions have been read and understood?
-
Hoists are in proper operating condition?
-
The wire rope has been inspected, reeved and is attached properly?
-
The length of steel wire rope is long enough to reach the ground and is attached correctly to the roof support?
-
After load is applied, all fittings have been checked for tightness?
-
Electrical cable or air hose connections have been inspected and are safe. Strain relief has been provided?
-
The power supply is enough to operate the hoist properly?
-
The hoist is correctly attached to the stirrup?
FALL ARREST SYSTEM
-
Each person to use the stage/cage/chair has own independent fall arrest system?
-
Each lifeline has been totally checked for safe use and is correctly attached at an independent safe anchor point at roof level. Roof edge protection has been provided some lifeline?
-
Each rope grab has been checked for correct operation and installation?
-
Each full body harness or belt has been thoroughly check to make sure that all components are safe?
-
Each lanyard has been thoroughly checked for safe condition. All parts are sound and correctly attach the rope grab. The D ring is in the center of the back?
-
The body harness is the proper size and fits correctly and is snug to the body?
ADDITIONAL CHECKS
-
The equipment must be kept clear of exposed electrical lines and equipment.
-
The equipment must not be used in bad weather conditions
-
The total rigging must be checked each time you use or move it.
-
Never overload the equipment.
-
Immediately report any improper operation to your supervisor
Employee Signature
-
Foreman