Title Page
-
Site conducted
-
Conducted on
-
Prepared by
-
VIN (last 8.)
Vehicle Cleanliness/Valet Standard
-
Check Valet Requested and ensure that correct Valet has been carried out (Gold / Silver / Bronze)
-
All Rubbish Removed
-
Vacuumed and clean Interior
-
Have all Stickers & Glue been Removed
-
Exterior Clean and dried using a Chamois / Leather to remove water marks
-
Dressing applied to Wheels and Tyres (silver & gold valet only)
-
Vacuumed and clean Interior + Luggage Compartment + Spare Wheel + Cover & Container (silver & gold valet only)
-
Inspect Interior trim for Damage and dressings applied to surfaces (silver & gold valet only)
-
All Shut areas Clean, Inside Door, Boot, Bonnet and side doors rear doors on vans (silver & gold valet only)
-
Glass / Windows cleaned using window cleaner (silver & gold valet only)
-
Stains removed from Upholstry (gold valet only)
-
Have protective Carpet & Seat covers been fitted (gold valet only)
-
Has a full bodywork Polish been performed (gold valet only)
PDI Check
-
Check Correct Number plates against Vin Number and that they are fitted securly front and rear
-
Check if correct LWN fitted
-
Check Body Work for damage
-
Is Aerial removed (NOTE:- Large Vans have the Aerials left fitted)
-
All tyres are compliant and uniform (brand, dimension..on Aftersales/Replacement Parts label attached to NV) and the pressure of all tyres conforms to the Aftersales/Replacement Parts label on the NV (empty load at +/-0.1 Bar )
-
Check the fluid levels/ Engine Oil is correct in the engine compartment (between min + max) Screen wash/Engine Coolant.
-
Check Torque of LWN if fitted
-
Check Battery Levels (EV 80%)
-
No warning lights on the dash board
-
Are matts in the vehicle and fitted where required
-
Shunt fuse moved in the “customer mode” configuration., Use remote if all doors unlock shunt changed if drivers operates only = shunt not changed
-
Check all parts in vehicle against FFA document including loose items
-
Adjustment of all multi-function displays (Radio, date & time, language, thermometer,etc.) according to equipment in line with Country and customer requirements.
-
Check the operation of all electronic equipment according to model, and customer expectations (Electric windows/Mirrors/ Radio/ Heater/ Sat Nav)
-
Check all lights -External lights: position lights, dipped headlights, main beam, brake lights, number plate light, reverse lights, fog lights, indicators and hazards.
-
Seats: check all settings possible and Front and rear seatbelts: state, close, open, height adjustment, lock.
-
Check the function of each key and in each lock.
-
Check the locking / unlocking of all opening / electrical devices (doors, windows, roofs, boot, etc.)
-
Coded anti-theft wheel lock present and compliant (alloy wheels) or wheel trims fitted and valves positioned correctly.
-
Accessories listed in the “Toolkit” document are present in the boot.
-
Spare wheel/Puncture repair kit present.
Paperwork & Checks
-
Battery tester: MIDTRONICS tool EXP 925 PSA (Ref; PR: 9776 EH) is the correct version & the battery test carried out.
-
Battery test result attached to paperwork
-
Diagnostic report is printed & retained on the j/card, Check the j/card to see if Recall is required.
NDR vehicles
-
Correct external stickers attached in the right locations including fuel cap information
-
Correct internal stickers in place and Key ring etc has correrct information logged.
-
Keys and documentation seperated where required and envelope contains correct information
