Post Pour Inspection

• Job number

• Location
  Address

• Client / Job Number / Panel Number

• Bed Number

• Panel Thickness

• Conducted on

  Date

• Prepared by

Check all boxes below with the shop drawing before ticking panel for storage.

• Are all dimensions as per shop drawing?

  Yes

  No

  N/A

• Are the diagonals as per shop drawing?

  Yes

  No

  N/A

• Are all lifting devices in place before lifting as per shop drawing?

  Yes

  No

  N/A

• Is a strong back required for lifting as per shop drawing?

  Yes

  No

  N/A

• Are all blockouts and penetrations in the correct position as per shop drawing?

  Yes

  No

  N/A

• Are all near face ferrules installed correctly as per shop drawing?

  Yes

  No

  N/A

• Are all far face ferrules installed correctly as per shop drawing?

  Yes

  No

  N/A

• Are all fillet lines in the correct position as per shop drawing?

  Yes

  No

  N/A

• Are all cast in plates and angles in the correct position as per shop drawing?

  Yes

  No

  N/A

• Are all rebates in the correct position as per shop drawing?

  Yes

  No

  N/A

• Is the panel finish to a class 2 finish?

  Yes

  No

  N/A

• Has all patching and rework been completed to a satisfactory standard?

  Yes

  No

  N/A

• Has the panel been inspected and ticked off ready for storage?

  Yes

  No

  N/A

• Is the panel marked correctly ie. date/ job number/panel weight etc?

  Yes

  No

  N/A

• Has adequate protection been provided to prevent panel damage whilst in storage? Ie. dun age positioned between pins and the panel?

  Yes

  No

  N/A

I have undertaken a review of the above processes and have approved this panel for transport.

• Add signature

  Sign

• Add media

  Media