Pre-Concrete ITP

• Pre-Concrete ITP

• Site Address

• Concrete location. (e.g. Garage slab, Level 2 slab etc..)

• Conducted on

  Date

• Prepared by

• Pour Description

  Select Slab on Ground Suspended slab Footing Block-Fill Formwork AFS / Dincel

  • Slab on Ground
  • Suspended slab
  • Footing
  • Block-Fill
  • Formwork
  • AFS / Dincel

• Concrete on site time booked

  Date

• Concrete supplier

• Concrete mix ordered

  25MPa

  32Mpa

  40Mpa

• Quantity/ Volume ordered - M3

• Any additive or accelerator?

  Yes

  No

• Test required?

  Yes

  No

• Has concrete supplier been advised how trucks should enter the site?

  Yes

  No

• Are traffic management services required?

  Yes

  No

• Pump washout area confirmed to pump operator?

  Yes

  No

• Formwork Contractor

• Steelworker

• Pump Contractor

• Concrete Finishing Contractor

• Engineer

• Certifier

• Electrician

• Plumber

• Have all dimension been checked against the architectural and engineer's drawings and RFI's that pertain to this area?

  Yes

  No

• Are all Hobs/Upstands/downturns formed per the drawings?

  Yes

  No

• Check set-downs for wet areas (min 50mm)

  Compliant

  Non-Compliant

  N/A

Suspended Slab

• Ensure formwork deck for suspended slabs are set to the right height

  Compliant

  Non-Compliant

  N/A

• Ensure formwork A-frames have cross bracers both sides

  Compliant

  Non-Compliant

  N/A

• Check rebates sizes and positions under sliding doors

  Compliant

  Non-Compliant

  N/A

• Have all minimum clear cover requirements been achieved?

  Compliant

  Non-Compliant

  N/A

• Has all reo and mesh been checked against Engineer drawings?

  Yes

  No

• Has the Engineer attended site to inspect and sign off?

  Yes

  No

• Has the engineer requested/authorised photos in lieu of site visit?

  Yes

  No

• Has the Certifier attended site to inspect and sign off?

  Yes

  No

  N/A

• Has termite protection been installed?

  Yes

  No

  N/A

• Have adequate supports (chairs) been installed so that reo and wire mesh remain in position during the pour?

  Yes

  No

  N/A

• Is the vapour barrier installed correctly

  Yes

  No

  N/A

• Have dowels been checked for proper placement?

  Yes

  No

  N/A

• Are starter-bars at correct centers and alignment?

  Yes

  No

  N/A

• Stormwater, drainage and hydraulic pipework installed, retained and checked?

  Yes

  No

  N/A

• Plumber's ITP Received?

  Yes

  No

  N/A

• Are all electrical conduits and fitments installed and Electrician's ITP Received?

  Yes

  No

  N/A

• Are Floor wastes all set and at the proper RL for falls?

  Yes

  No

  N/A

• Are there any sleeves, recesses or misc items that need to be placed?

  Yes

  No

• Has expansion material been placed at all the specified locations.

  Yes

  No

• Is formwork clean and free of debris/rust/scaling ?

  Yes

  No

  N/A

• Pictures - Include all areas and at least 10 photos

  Media

• Acceptance Signatures:

• Signature- Site Manager

  Sign

• Signature Engineer

  Sign

• Signature - Certifier

  Sign

• Signature Formworker

  Sign

• Signature

  Sign