MEWP Pre-use inspection checklist
-
Job Description
-
Conducted on
-
Location
-
Prepared by
- Nano (A1196245)
- Nano (P130001392)
- Nano (A1196264)
- Nano (P10001337)
- HR28 Cherry Pick (MA1849983)
- SJ46 Cherry Pick (B301000348)
- Scissor Lift (A100026190)
- Scissor Lift (22137697)
- Scissor Lift (1200025855)
MEWPS PREUSE INSPECTION CHECKLIST
-
Machine serial number (inc Photo)
- Nano (A1196245)
- Nano (P130001392)
- Nano (A1196264)
- Nano (P10001337)
- HR28 Cherry Pick (MA1849983)
- SJ46 Cherry Pick (B301000348)
- Scissor Lift (A100026190)
- Scissor Lift (22137697)
- Scissor Lift (1200025855)
Documentation
-
Is the thorough examination certificate up to date (within last 6 months) ?
-
Is the manufacturer's Operator Manual present ?
-
Is the Rescue Plan (RAMS) in place
Wheels & Tyres
-
Are all wheels in good working order ? (CHECK: nuts, retainers: loose, damage)
-
Is the tyre pressure sufficient ?
-
Are the wheels free from cuts, Splits, exposed braiding, damaged rims ?
Engine/Power Source
-
Are all fluids at a good level ?
-
Is the area free from fluid leakage on the ground or engine ?
-
Is the Battery in good working order ? (CHECK: electrolyte, security and charging plug condition)
Hydraulics
-
Is the hydraulic fluid level sufficient ?
-
Is the Hydraulic system free from leaks ? (CHECK: hoses, pipe connections, ram cylinders)
Hoses/Cables
-
Are the hoses/cables security and in good condition (CHECK:cuts, chafing, bulges)
-
Are the power track cable trays free from damage and debris ?
Outriggers/Stabilisers
-
Are the spreader plates in good working order ?
-
Are pins/retainers and the footplate present ?
-
Are the interlocks functioning and engaged ?
Chassis, Boom & Scissor Park
-
Is the general condition good ? (CHECK: damage, misalignment, corrosion)
-
Is the machine free from Cracks in the weld ?
-
Are pins, retainers and chains present and sufficient ? (CHECK: security and signs of wear)
-
Are canopies, guards and engine covers present and sufficient ? (CHECK: security and condition)
Platform or Cage
-
Are the Steps for access/egress secure, undamaged and clear ?
-
Is the entrance Gate, guard rails and retaining pins in place ?
-
Are harness anchor points in place ?
-
Is the basket clear of rubbish, debris and obstructions ?
Decals and Signage
-
Is the ID Plate, safety, warning and information decals legible and in place ?
-
Is Control signage in place ? (CHECK: identification decals, directional arrows)
-
Is Platform load signage in place (CHECK: SWL, max. wind speed, max. number of persons
Function Checks: Are the following in good working order?
-
Security device (power isolator, keypad, smartcard)
-
Function enable (ignition key, foot switch, hold to run device)
-
Emergency Stops and emergency lowering system
-
All switches, function controls (move freely, do not stick)
-
Lifting functions (raise, lower, slew, tele out, tele in)
-
Travel functions (forward, reverse, steer, brakes)
-
Elevated drive speed (reduced or prevented)
-
Lights, beacons, warning devices
-
Alarms (tilt, descent and travel)
-
Limit switches (eg descent, load, outreach, rotation
-
Pothole protection device (fully deploys and retracts)
-
Oscillating axle locks, extending axles
-
Accessories, power to platform, extending decks
-
Jacks, legs, outriggers, levelling devices
Sign off
-
Signature