Title Page

  • Site conducted

  • Conducted on

  • Prepared by

  • Location

  • Work Order Number.

Untitled Page

(T)ools, (S)afety Equipment and (M)aterials

  • Mechanics tool set

  • Cleaning materials

  • Silicon spray or non-ammonia based cleaner

  • Mechanics tool set

  • Lubricants

Safety Guidelines

  • Schedule maintenance with operating personnel

  • Record and report any equipment damage or deficiencies

  • Review and follow manufacturer's O&M instructions

  • Record results in the component maintenance log

Maintenance Procedures

  • Check alignment of door and mechanism. Inspect mountings, hinges, mats and trim, weather stripping, etc Replace, tighten, and adjust as required

  • Operate power assist doors, observing operation of actuating and safety devices, door speed, and closure function

  • Check manual operation

  • Inspect power unit, lubricate and tighten lines as required

  • Perform operation check of all electronic locking mechanisms. Check operation of control board relays, clean, replace, adjust contacts as required

  • Inspect door operating unit, tighten lines, and adjust as required

  • Clean and lubricate door pivot points

Maintenance Hours

  • Time spent on work order?

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.