Preventive Maintenance Checklist: SECURITY DOOR GROUP (SMALL) - Semi-Annual

• Site conducted

• Conducted on

  Date

• Prepared by

• Location

• Work Order Number

(T)ools, (S)afety Equipment and (M)aterials

• Mechanics tool set

  Yes

  No

  N/A

• Cleaning materials

  Yes

  No

  N/A

• Silicon spray or non-ammonia based cleaner

  Yes

  No

  N/A

• Mechanics tool set

  Yes

  No

  N/A

• Lubricants

  Yes

  No

  N/A

Safety Guidelines

• Schedule maintenance with operating personnel

  Yes

  No

  N/A

• Record and report any equipment damage or deficiencies

  Yes

  No

  N/A

• Review and follow manufacturer's O&M instructions

  Yes

  No

  N/A

• Record results in the component maintenance log

  Yes

  No

  N/A

Maintenance Procedures

• Check alignment of door and mechanism. Inspect mountings, hinges, mats and trim, weather stripping, etc Replace, tighten, and adjust as required

  Yes

  No

  N/A

• Operate power assist doors, observing operation of actuating and safety devices, door speed, and closure function

  Yes

  No

  N/A

• Check manual operation

  Yes

  No

  N/A

• Inspect power unit, lubricate and tighten lines as required

  Yes

  No

  N/A

• Perform operation check of all electronic locking mechanisms. Check operation of control board relays, clean, replace, adjust contacts as required

  Yes

  No

  N/A

• Inspect door operating unit, tighten lines, and adjust as required

  Yes

  No

  N/A

• Clean and lubricate door pivot points

  Yes

  No

  N/A

Maintenance Hours

• Time spent on work order?