PRODECK & GASS CHECKLIST UNC

• JOB NAME AND NO.

• Audit Title

• Client / Site

• Conducted on

  Date

• Prepared by

• Location
  Address

• Personnel

• Drawing Reference

  Drawing

PRODECK Pour Check List & Gass System

ProDeck

• SHORING VISUALLY PLUMB?

  Yes

  No

  N/A

• ALL BRACES INSTALLED FOR THE PRODECK<br>

  Yes

  No

  N/A

• PANELS LAYOUT USED IS THE SAME AS SHOW ON THE DRAWING?

  Yes

  No

  N/A

• ARE THE PANELS BEARING ON THE LEDGER AND GROOVED INTO THE LEDGER

  Yes

  No

  N/A

• IS THE PRIMARY LEDGER RESTING ON THE HEAD ADAPTOR COMPLETELY

  Yes

  No

  N/A

• STRINGER SPACING BY THE DRAWING?

  Yes

  No

  N/A

• STRINGER USED IS THE SAME AS SHOW ON THE DRAWING?

  Yes

  No

  N/A

• IS THE SECONDARY LEDGER (RUNNING N-S) EVERY 14' UNDER A JOIST OR BEAM IN PLACE AS SHOWN ON THE DRAWING

  Yes

  No

  N/A

• DOES THE HEAD ADAPTOR HAVE A PIN SUPPORT UNDERNEATH, SO IT DOESN'T SLIP

  Yes

  No

  N/A

• IS THE PIN COMPLETELY INSERTED INTO THE POST SHORE

  Yes

  No

  N/A

• POST SHORE EXTENSION MEETS THE SEALED DRAWING REQUIREMETS?

  Yes

  No

  N/A

• IS THE SHORE LEG COMPLETELY BEARING ON THE SLAB BELOW? IS THERE A WEDGE INPLACE FOR A RAMP SITUATION

  Yes

  No

  N/A

GASS TABLES

• SHORING VISUALLY PLUMB?

  Yes

  No

  N/A

• ARE THE JOISTS USED SAME AS SHOWN ON THE DRAWINGS

  Yes

  No

  N/A

• JOISTS SPACING BY THE DRAWING? AND JOISTS CLAMPED TO THE STRINGER WITH A-CLAMP ON BOTH SIDES

  Yes

  No

  N/A

• STRINGER SPACING BY THE DRAWING? AND STRINGERS CLAMPED TO THE GASS POST WITH A HEX BOLT ON BOTH SIDES

  Yes

  No

  N/A

• STRINGER USED IS SAME AS SHOWN ON THE DRAWING

  Yes

  No

  N/A

• ARE THE BRACE FRAMES IN PLACE AND BANDED TO THE STRINGER?

  Yes

  No

  N/A

• ARE THE GASS LEG RESTING ON THE SCREW AND SNUG

  Yes

  No

  N/A

• ARE THE GASS TABLES TIED DOWN WITH A CABLE TO THE FLOOR TO PREVENT TIPPING

  Yes

  No

  N/A

• IS THE SHORE LEG COMPLETELY BEARING ON THE SLAB BELOW? IS THERE A WEDGE INPLACE FOR A RAMP SITUATION

  Yes

  No

  N/A

• POST SHORE EXTENSION MEETS THE SEALED DRAWING REQUIREMETS?

  Yes

  No

  N/A

RESHORE

• IS RESHORE REQUIRED LEG-LEG

  Yes

  No

  N/A

• HOW MANY FLOORS OF RESHORE REQUIRED

  2

• DOES THE FLOOR BELOW MEET THE STRENGTH REQUIREMENT BASED ON THE RESHORE SECTION

  Yes

  No

  N/A

• ARE THE RESHORE CLIPS IN PLACE

  Yes

  No

  N/A

• ARE RESHORE VISUALLY PLUMB

  Yes

  No

  N/A

• IS THE RESHORE PIN IN COMPLETELY INSERTED AND IS THE RESHORE SNUG

  Yes

  No

  N/A

• ARE PERIMETER RESHORE TIED WITH A 2x4TO INTERIOR RESHORE TO PREVENT FALL ONTO ANY TRAFFIC

  Yes

  No

  N/A

• IS THE OUTRIGGER RESHORED AS THE SAME NO. OF FLOORS AS THE TYPICAL RESHORE

  Yes

  No

  N/A