Title Page

  • Quality inspection report

  • Jobsite

  • Conducted on

  • Prepared by

  • Location

Equipment: Furnace,A/C coil

  • Installed properly sloped and secured

  • Flue Venting and drain lines ran and hooked up to provided drain

  • Drain pan and wet switch required

Duct work

  • All ducts is installed and insulated properly

  • Heat registers screens and ceiling boots installed with bat wings

  • Flex ducts installed correctly and strapped every 4'

  • Wall stacks is secured and framing strapped

Exhaust fans,range and dryer venting

  • All fans are installed

  • All fans are vented and outside hoods is installed with proper paper and quick flash behind

  • Dryer vent is hooked up and screen is removed in outside hood

  • Range vent is installed with outside termination

HWH

  • Sleeve, vent pipes or quick flash installed

Zoning

  • By-pass and zoning dampers installed and marked

Filters,f/a, filters box

  • All required filters installed

Make up air

  • 120volt timer, motor, damper and current sensor provided

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.