Reconnect by tails

• Document No.

• Audit Title

• Client / Site

• Conducted on

  Date

• Prepared by

• Location
  Address

• Photo of site

  Media

• Personnel

Pre-job assessment

• Inspect site for possible hazards

  Yes

  No

  N/A

• Contact customer (if applicable(

  Yes

  No

  N/A

• Confirm safe access to meter box

  Yes

  No

  N/A

• Perform hazard assessment of meter board

  Yes

  No

  N/A

• Confirm meter number matches job sheet / palm pilot

  Yes

  No

  N/A

Job completion

• Read and record meter reading(s)

  Yes

  No

  N/A

• Ensure site is isolated at main switch

  Yes

  No

  N/A

• Put on low voltage glove(s), outer protective glove(s) & safety glasses

  Yes

  No

  N/A

• Test with volt finger to confirm site is isolated at meter & main switch

  Yes

  No

  N/A

• Remove double seal from meter cover

  Yes

  No

  N/A

• Remove meter cover

  Yes

  No

  N/A

• Remove cap and tape from tail

  Yes

  No

  N/A

• Ensure strands of wire are not frayed / loose

  Yes

  No

  N/A

• Reinsert tail into meter and tighten screws

  Yes

  No

  N/A

• Replace and re-seal meter cover (single seal only)

  Yes

  No

  N/A

Post-job and vacate site

• Tidy area including removing old seals from bottom of meter box

  Yes

  No

  N/A

• Complete "reconnection notice" and give to customer, or place in letter box, under front door, or in meter box

  Yes

  No

  N/A

• Vacate site

  Yes

  No

  N/A

• Tech being audited

  Sign

• Auditor

  Sign