REDHS

• Document No.

• Audit Title

• Client / Site

• Conducted on

  Date

• Prepared by

• Location
  Address

• Personnel

Signage

• Do doors have signage "Fire Door" or "Smoke Door"?

  Yes

  No

  N/A

Clearances in the closed position

• Check Perimeter, are gaps between edge of the door and frame 3 mm at the head and hinge and lock sites?

  Yes

  No

  N/A

• Check the door leaf to the door seat rebate, does the average gap exceed 5 mm?

  Yes

  No

  N/A

• Do bottom gaps exceed 10 mm at the threshold?

  Yes

  No

  N/A

Hardware

• Do doors close satisfactorily upon detector activation?

  Yes

  No

  N/A

• Operate latches and verify the latch bolt engages into the striker plate sufficiently to hold the door in the closed position.

  Yes

  No

  N/A

• Are latch handles and latch bolts clean and do they operate freely and smoothly?

  Yes

  No

  N/A

• Are doors free from any visible delamination, buckling, warping, bowing, twisting or significant damage?

  Yes

  No

  N/A

• Are door edges in good condition and free from any splitting or damage on all sides?

  Yes

  No

  N/A

• Are door frames free of excessive distortion at any point along the frame?

  Yes

  No

  N/A

• Are vision panels in sound condition and free from any cracks?

  Yes

  No

  N/A

• Are perimeter trims and framing around vision panels secure, in sound condition with all fixing screws in place?

  Yes

  No

  N/A

Door closers and pivots

• Does. the closer arm and any pivots operate freely and smoothly?

  Yes

  No

  N/A

• Are the Doors free from any closer oil leakage?

  Yes

  No

  N/A

• Are screw fixings and mountings for door closers secure to the door and door frame?

  Yes

  No

  N/A

• Is the door closer body free from obstructions by walls, fixtures and/or fittings at any point throughout its swing?

  Yes

  No

  N/A

• The door closes fully and latches.

  Yes

  No

  N/A

• For doors with magnetic hold open devices, the door comes to the fully closed and latched position upon release of the hold open device?

  Yes

  No

  N/A

• Verify the opening and closing forces are such that the doors can be easily opened and closed in normal conditions and in fire mode, taking into consideration any pressurised systems within the building.

  Yes

  No

  N/A

Hinges

• Are hinges free from any undue wear and tear, correctly aligned, operating smoothly and freely?

  Yes

  No

  N/A

• Are hinges securely fixed to the door and frame?

  Yes

  No

  N/A