Information

  • Document No.

  • Conducted on

  • Tech Name:

  • Last 4 of W/O #

  • Add location
  • Did you mount the dish securely according to the Dish Mounting Standards? If an existing mount - is the mount installed according to installation standards?

  • Attach a photo of your mount.

  • Do you have a clear Line of Sight with 5 Degrees Clearance?

  • Did you run a limit scan at each receiver location to verify that the signal strength is above the minimum accepted levels?

  • If this is a Service Call or Trouble Call type Work Order did you use the Troubleshooting Job Aid or the Hopper Troubleshooting Job Aid?

  • Did you complete the Final Quick Checks of the system that are listed on the appropriate TJA?

  • Did you check for Non-Approved Parts in the entire system? Ex. Low Frequency barrels, non approved connectors.....

  • Did you explain to the customer how to get the TV back on the correct input or channel to view programming? TV1 and TV2

  • Did you set up Limited Mode on the customer's remotes?

  • If installing a dual tuner receiver - Did you program the TV2 remotes for SAT Auto Tune?

  • If any items are not achieved, Please explain Why?

  • Add signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.