Information
-
Document No.
-
Tractor Number
-
Conducted on
-
Prepared by
GENERAL
-
Visual inspection of the tractor(i.e. Damage, Cleanliness, Leaks, Tires)
-
Annual inspection sticker current?
-
Are engine fluid levels?
-
Check engine components? Belts, coolers, fan, etc.
-
Check all batteries/cables for condition and that they are mounted properly.
-
Check starting operation of tractor/truck?
-
Check for any abnormal engine noise, surging or smoke coming from engine?
-
Check for exhaust Leaks?
CONTINUE IN-CAB INSPECTION
-
Interior condition and cleanliness?
-
Inspect instruments and gauges to ensure working properly.
-
Inspect windshield and wiper operation, check for cracks and chips
-
Check seat operation and condition
-
Inspect lights; dome, dash, high and low beam operations
-
Verify odometer readings to paperwork?
-
Check truck binder to ensure all required permits/documentation are present?
-
Check air and city horn operation?
SAFETY EQUIPMENT
-
Verify the DVIR book is being signed by the technician after the repair and attaching a work order number.
-
Inspect seat belts operation and condition.
-
Fire Extinguisher fully charged and secured to vehicle?
-
Reflector Kit, inspect kit to make sure all reflectors are intact and secure.
-
Safety back up alarm operation?
-
Check for the Collision Kit?
-
Make sure the spill Kit is present and in good condition.
-
Equipped and operational on-board computer and DriveCam?
BRAKES AND SUSPENSION
-
Check brake air system. ( start truck, prime to 120 PSI, release brake valve, push/hold brake pedal, check gauges, listen for air leaks, bleed all air, key is on/truck is off, tap brake pedal, warning buzzer/light, 30 PSI brake valve should pop out)
-
Check brake shoe thickness?
-
Check brake drum wear?
-
Check brake components? Seals, brake chambers, slack adjusters, etc.
-
Check airlines for rubbing and to make sure they are secure.
-
Shocks, airbags or springs in good condition?
LIGHTING AND REFLECTORS
-
Check all lights and signals to make sure they are operating as required.
-
Insure reflective tape is present and in good condition.
TIRES AND WHEELS
-
Check for miss-matched tires tread.
-
Check for miss alignment of tires (irregular wear patterns)
-
Inspect tires for side-wall damage, missing chunks or cuts or tread separations
-
Check to make sure all tires are inflated to the proper air pressures. (105 steer and 100-95 drive)
-
Check for proper tread height.
-
Check valve stem and cap condition.
-
Inspect the overall rim and hub condition.
INSPECT FIFTH WHEEL ASSEMBLY
-
Verify lubrication and condition of mounting bracket and fifth wheel plate
