Robinson Rig Inspection

Information

Document No.
Robinson Drilling Rig Inspection
RIG #.
Conducted on
Prepared by
Location

DRILL SITE

Toolpusher at rig location
Authorized Personnel Sign Posted at entrance to site 1910.145(c)(2)(i) RP54 7.1.2-3
Visible rig identification sign erected at entrance to site road and at all directional changes on site road (for 911 services) 1910.151(a)
Hard Hat/Safety Glasses/Steel Toe Shoe Signs Posted at prominent locations on site 1910.145(c)(3)
No Smoking Area’s Designated & Posted. RP54 7.1.2-3. 1910.145(c)(2)(i)
No Parking within 100 ft of the rig RP54 6.1.15, RP4 98.1,RP68 8.1
H2S/SO2 warning signs erected, if applicable, at entrance to site and at other prominent locations on site 1910.145(c)(2)(i) 1910.1000(e) 1910.1200(f)(5-6) RP54 7.1.2-3 RP49 5.1 RP68 6.9
H2S monitoring equipment properly maintained & calibrated RP49 6.5 RP68 6.4
Emergency escape air packs and life lines are readily and quickly available, if applicable 1910.134(d)(2)(i) RP49 6.6.2 RP68 6.5.1, 6.7
Emergency escape air packs properly maintained and fully charged RP49 6.6.2 RP 68 6.5.1, 6.7
Emergency escape air packs stored in a convenient, clean and sanitary location RP49 6.6.2 RP68 6.5.1, 6.7
Standby rescue person with suitable rescue equip. & appropriate breathing apparatus provided RP68 6.6, 6.7
Escape line flagged with visible material RP4G 14.5.f
Outhouse/restroom facility provided or in close proximity to the site. (LT 10 min travel time or 2 miles, whichever is less) (Facility in close proximity only applies if the site is active for less than 1 day) 1910.141(c)(1)(i)
Outhouse clean and sanitary, if provided. 1910.142(d)(10)
Toolpusher’s trailer grounded RP54 6.1.16
Toolpusher’s trailer securely positioned RP54 6.1.16
Housekeeping 1910.22(a)(1) RP54 6.5.1
Muster area designated. 1910.38(c)(4)
Muster area posted 1910.145(c)(3)
Warning signs clean and visible 1910.1200(f)(9)
All bulk storage ( oil bins, diesel tank; ect.) labeled as to their contents 1910.1200(f)(4-5)
Crew change house clean 1910.22(a)(1) RP54 6.5.1
Supply storage house clean 1910.22(a)(1) RP54 6.5.1
Wind Sock available. RP49 8.2.3 RP68 6.8, 8.2.4

PPE & GENERAL SAFETY

OSHA poster posted 1903.2(a)(1)
Pre-Job safety meeting held. RP54 6.1.7
Safety equipment available 1910.132(a)
Proper clothing worn by crew (No loose clothing). RP54 5.2.5 RP54 5.2.6 1910.132(a)
Hard hats used by crew RP54 5.2.1 1910.135(a)(1-2)
Safety glasses used by crew RP54 5.2.2 1910.133(a)(1-5)
Steel toed shoes used by crew RP54 5.2.3 1910.136(a)
Hazardous jewelry not worn by crew RP54 5.2.7
Fall protection used, when required RP54 5.5.1
No Smoking rules observed RP54 7.1.3
First Aid Kit/Bloodborne Pathogen Kit available on site 1910.151(b) RP54 4.3.2
Emergency phone numbers posted RP54 4.2.1 RP49 7.6 RP68 7.7
MSDS’s available and accessible at all times RP54 6.1.12 1910.1200(g)(1)
MSDS’s available and accessible at all times. RP54 6.1.12 1910.1200(g)(1)
Emergency response plan. 1910.38(b) 1910.120(q)(1-2) RP49 7.3-8 RP68 7.3-9
Emergency response plan. 1910.38(b) 1910.120(q)(1-2) RP49 7.3-8 RP68 7.3-9
Critical Equipment periodically inspected & tested. RP54 9.16.1-3

MUD PUMP AREA

Drive belts and shafts guarded RP54 6.8.2-3 1910.219(e)(1-6) 1910.219(c)(2)(i)
Pony rods guarded RP54 6.8.2-3 1910.212(a)
Rotating parts guarded 1910.212(a) 1910.219(i)(2)
Head and valve covers fully bolted
Shear pin pop-off valve present and covered 1910.169(b)(3)(i-iv) RP54 9.13.11
Ends of mud vibrator hose snubbed
Pressure relief valves 1910.169(b)(3)(i-iv) RP54 9.13.2
Ends of relief lines, high pressure lines, etc secured RP54 9.13.3
General housekeeping of the area. RP54 6.5.1, 1910.22(a)(1)
Adequate lighting provided RP54 9.14.7
Approved lighting for the location available 1910.307(b)(1) RP500 5.3 RP500 10.1-16
Discharge lines from relief valves are anchored RP 54 9.13.2
Pumps, piping, hoses, valves and other fittings are maintained in good operating condition. RP54 9.13.4

MUD MIXING AREA

Bagged material properly stacked. 1910.176(b)
Adequate personal protective equipment available: □ Rubber Gloves □ Apron □ Face Shield □ Goggles □ Respirator: □ Other:________. RP54 5.2.4. RP54 6.13.2. 1910.132(a). 1910.133(a). 1910.134(a)(2). 1910.138(a)(1)
Employees using all required PPE 1910.132(a) 1910.133(a) 1910.138(a)(1)
Personal protective equipment properly stored. RP54 6.13.2. 1910.132(a). 1910.134(h)(2)(i)
“PPE Required” warning signs erected (Grouped or individual signs) 1910.145(c)(2)(i) 1910.145(c)(3)
Eye wash station available in close proximity (10 seconds walking distance from hazard) 1910.151(c) Z358.1 5.4.2 RP54 4.4.1
Emergency Shower* available in close proximity (10 seconds walking distance from hazard). (* especially when caustic is used, but not limited to) 1910.151(c) Z358.1 5.4.2. RP54 4.4.1
Personal protective equipment properly maintained and in a clean & sanitary condition. RP54 6.13.2 1910.132(a) 1910.134(h)(1)
Eye wash provides a minimum continuous flow of 0.4 gallons of water/solution per minute for 15 minutes Z358.1 5.1.6
Emergency Shower provides a minimum continuous flow of 20 gallons of water per minute for 15 minutes. Z358.1 4.1.4
Eye wash/emergency shower location identified with visible sign. Z358.1 5.4.3, 1910.145(c)(2)(i)
Eye wash/emergency shower access free from obstructions. Z358.1 5.4.2
Eye wash station/emergency shower in working order 1910.151(c)
Eye wash station/emergency shower in a clean & sanitary condition. 1910.141(a)(3)(i)
Eye wash station/emergency shower providing clean water supply. 1910.141(b)(1)(i)
Approved lighting for the location available. 1910.307(b)(1) RP500 5.3. RP500 10.1-16
Adequate lighting provided. RP54 9.14.7
General housekeeping RP54 6.5.1. 1910.22(a)(1)

MUD TANKS AND PITS

Adequate stairs with handrails. 1910.24(h). 1910.23(d)(1)
Adequate walkways and guardrails. 1910.23(c)(1)
Guardrails installed on all raised platforms, walkways, etc above 48” 1910.23(c)(1). 1910.23(d)(1)
Walkways free from obstruction and/or damage. 1910.23(c)(1)
Guardrails provided on crossovers. 1910.23(c)(1)
“PPE Required” warning signs erected. (grouped or individual signs). 1910.145(c)(2)(i). 1910.145(c)(3)
Chemical hazard warning signs erected. 1910.145(c)(2)(i)
Shale shaker properly guarded. 1910.23(c)(3)
Explosion proof equipment, fixtures and wiring used in the vicinity of the shale shaker. Class 1 Div 1/2 Location. 1910.307(b)(1-3) & subsections. 1910.307(c). RP500 5.3. RP500 10.1-16 RP 54 9.14.8
Agitator shafts & couplings properly guarded. 1910.219(c)(2)(i)
Mud guns properly secured. RP54 9.11.2
Jetting hoses properly secured. RP54 9.11.2
Approved lighting for the location installed. 1910.307(b)(1)
Adequate lighting provided. RP54 9.14.7
Adequate personal protective equipment available: □ Rubber Gloves □ Apron □ Face Shield □ Goggles □ Respirator: □ ½ mask □ Full Face □Other:________. RP54 5.2.4. RP54 6.13.2. 1910.132(a). 1910.133(a). 1910.134(a)(2). 1910.138(a)(1)
Employees using all required PPE. 1910.132(a). 1910.133(a). 1910.138(a)(1)
Personal protective equipment properly stored. RP54 6.13.2. 1910.132(a). 1910.134(h)(2)(i)
Personal protective equipment properly maintained and in a clean & sanitary condition. RP54 6.13.2. 1910.132(a). 1910.134(h)(1)
Stairways and ladders secured. RP54 9.3.8
General Housekeeping. 1910.22(a)(1). RP54 6.5.1
Electric wiring in good condition. 1910.303(b)(1-2). 1910.303(c)
All unused floor holes covered. 1910.23(a)(8). 1910.23(a)(9)

GENERATOR AND ELECTRICAL SYSTEMS

Generators properly located 100ft + from wellhead. RP54 9.14.2
Moving parts guarded. 1910.212(a)(1)
Generators properly grounded. RP54 9.14.11
Cover panels on electrical control boxes installed and closed. □ Mud □ Gen/SCR house □ Stor Tanks □ Sub Struct. □Drill Floor □ Derrick □ Other:________________. 1910.305(b)(2). 1910.335(a)(2)(ii)
All electrical controls marked as to their function and legible. 1910.303(f)
“HIGH VOLTAGE” warning signs erected. 1910.145(c)(2)(i). 1910.305(b)(2)(ii)
Insulating mats available at electrical panels. 1910.335(a)(2)(ii)
Condition of electrical wiring □ Mud □ Gen/SCR house □ Stor Tanks □ Sub Struct. □ Drill Floor □ Derrick □ Other:________________. 1910.303(b)(1-2)
Electrical wires properly strung. □ Mud □ Gen/SCR house □ Stor Tanks □ Sub Struct. □ Drill Floor □ Derrick □ Other:________________. 1910.305(a)(2)(iii). RP54 10.2.3
Unused electrical outlets covered □ Mud □ Gen/SCR house □ Stor Tanks □ Sub Struct. □ Drill Floor □ Derrick □ Other:________________ 1910.305(b)(1-3)
Air compressors properly guarded. 1910.212(a)(1)
Air storage tanks equipped with pop-off valve. 1910.169(b)(3)(i-iv)
“Hearing Protection Required” warning signs erected. 1910.145(c)(2)(i)
Hearing protection available. 1910.95(a)
Adequate lighting installed, RP54 9.14.7, RP54 9.14.4, 1910.303(h)(3)(ii), 1910.303(g)(1)(v)
Approved lighting for the location provided., (Class 1 Div 2 Location under worst case condition) 1910.307(b)(1), RP54 9.14.10, RP500 5.3
General Housekeeping, RP54 6.5.1
Electrical wiring/fixtures/etc approved for the location (Cl 1 Div 1 or 2 location) (Based on worst condition scenario), RP54 10.2.1, 1910.307(b)(1-2), RP500 5.3, RP500 6.1-2
Wires not running along the ground, RP54 10.2.3, 1910.305(a)(1)(iii)(G)
Wires not spliced. □ Mud □ Gen/SCR house □ Stor Tanks □ Sub Struct. □ Drill Floor □ Derrick □ Other:________________. RP54 10.2.4 1910.305(g)(2)(ii)
All light fixtures properly protected from damage. 1910.307(b)(1-2)
Receptacles and plugs in good condition. □ Mud □ Gen/SCR house □ Stor Tanks □ Sub Struct. □ Drill Floor □ Derrick □ Other:________________ 1910.303(b)(1)
Water hose used for washing area kept away from generator skid
Generator skid door props properly pinned
Fire extinguishers rated for electrical fires (B-C). 1910.157(d)(1)
Fire extinguishers located properly. 1910.157(c)(1)
Plugs of electrical extension cords in good condition. □ Mud □ Gen/SCR house □ Stor Tanks □ Sub Struct. □ Drill Floor □ Derrick Other:______ 1910.303(b)(1). RP54 9.14.5
Electrical cords, fixed or extension, not run through doorways. 1910.305(a)(2)(iii)(G). 1910.305(g)(1)(iii)(C)
Electric cord and cable strain relief. □ Mud □ Gen/SCR house □ Stor Tanks □ Sub Struct. □ Drill Floor □ Derrick □ Other:______. 1910.305(g)(2) (iii)

FIRE PROTECTION

B/C class fire extinguishers available. RP54 7.2.4. RP54 7.2.5
Adequate number of fire extinguishers available. 1910.157(d)(2-6). RP54 7.2.4. RP54 7.2.5
Fire extinguishers properly charged. 1910.157(c)(4)
Fire extinguishers with equipped with gauges. 1910.157(c)(4)
Fire extinguishers properly located and in/at their assigned locations. 1910.157(c)(1), 1910.157(c)(4), RP54 6.5.5, RP54 7.2.2. RP54 12.1.3
Flammables stored properly. 1910.106(d)(2), RP54 8.1.1
No Smoking rules enforced. RP54 7.1.2-6
Flare area, if present, is clear of combustibles. RP53 15.11, RP49 8.2.6, RP68 8.2.8
Flare Lines & Flare Stack location based on prevailing wind direction., RP49 8.2.6, RP68 8.2.8
Fire extinguishers tagged and/or inspection data logged into database. 1910.157(e)(1-5), RP54 7.2.3, RP54 7.2.7
Fire extinguisher location easily identified. 1910.157(c)(1), RP54 6.5.5, RP54 7.2.2

FUEL & OTHER FLAMMABLE LIQUID STORAGE TANKS & NON-FLAMMABLE STORAGE TANK

Fuel storage tanks properly located! RP 54 8.3.5, 1910.106(b)
Discharge nozzles in good condition, 1910.106(b)
Discharge hoses in good condition, 1910.106(b)
Discharge valves in good condition. 1910.106(b)
LPG storage tanks and compressed gas cylinders in good condition, 1910.106(b), RP54 8.3.8
Piping and fuel lines in good condition. 1910.106(b)
Stationary ladders on storage tanks in good condition. 1910.27(f)
Adequate lighting provided. RP54 9.14.7
Fuel tanks properly labeled on all sides. RP54 8.4.1d. 1910.1200(f)(4-5)
“Flammable” warning signs erected on all sides. 1910.145(c)(2)(i). 1910.1200(f)(5-6). RP54 7.1.2-6. RP54 8.4.1d
Vapor release vents elevated & away from ignition sources. 1910.106(b)(2)(iv)(c). 1910.106(b)(2)(v)(g)
General housekeeping. RP54 6.5.1. 1910.22(a)(1)
B/C Class fire extinguisher available and identified. RP54 8.4.1e. 1910.157(c)(1). 1910.157(d)(1)
Contents of NON-FLAMMABLE storage tanks identified on all sides of tank(s)

PIPE RACK AREA

Ends of pipe racks properly chocked, 1910.176(b), RP54 9.12.3
Spacers used to separate layers of pipe. 1910.176(b). RP54 9.12.5
Pipe racks are level and stable
Pipe rack catwalk in good condition
V-door slide in good condition
Derrick stand and ladder in good condition. 1910.27
Dead end of drilling line anchored RP9B 3.3.9
Employees not permitted on top of pipe
General housekeeping, 1910.176(c), RP54 6.5.1

BLOW-OUT PREVENTERS

BOP properly installed. RP54 6.4.1
BOP stack properly stabilized. RP54 6.4.10
Wheels and stems in place, if automatic device is not available.
All hydraulic lines connected RP54 6.4.18
Accumulator unit properly located. RP54 7.2.2
Accumulator bottles labeled with contents. 1910.1200(f)(5-6)
Accumulator valves in appropriate position, open or closed. RP54 7.2.2
Accumulator valves identified as to purpose and position. RP54 7.2.2 RP53 12.5.3f
Gauges properly installed & located, RP53 8.2i
Choke manifold and line secured. RP54 6.4.18
Choke manifold accessible. RP53 8.2c
Warning signs erected. □ Flammable □ H2S □ Hard Hat □ Eye Protection. □ Confined Space □ Auth. Personnel □ Ear Protection. 1910.145(c)(2)(i) RP54 7.1.2-3
General housekeeping. RP54 6.5.1, 1910.22(a)(1)
Hydraulic lines protected. RP53 12.5.2

DERRICK & SUBSTRUCTURE

Derrick/A-Frame assembly pins in place. RP54 9.2.8
Assembly pins secured with keepers. RP54 9.2.8
Substructure assembly pins in place. RP54 9.2.8
Substructure assembly pins secured with keepers. RP54 9.2.8
Manufacturer’s specification/operation plate attached to derrick. RP54 9.2.2
Damage and/or corrosion to derrick (waste metal). RP54 9.16.1
Damage and/or corrosion to substructure (waste metal). RP54 9.16.1
Condition of derrick ladder. RP54 9.3.1-2
Climb assist device available. 1910.27(d)(5)
Climb assist device in good condition. 1910.27(d)(5)
Full body harness with lanyard available. 1910.132(c), RP54 5.5.1
Full body harness w/ lanyard in good condition. 1910.132(c), RP54 5.5.1
Fall protection devices in use. 1910.132(c), RP54 5.5.1
Condition of fall protection device.
Date of last factory inspection for crown fall protection devices.
Date of last factory inspection for Derrick board fall block.
“Fall Protection Required” warning signs erected. 1910.145(c)(2)(i)
Derrick/Tubing boards in good condition. RP54 9.2.17
Guardrails installed on derrick board. RP54 9.3.17, RP54 5.5.1
Crown guardrails installed. RP54 9.3.17, 1910.23(c)(1)
Derrick locking pins in place with safety pins, RP54 9.2.8
Booms and boom lines in good condition
Adequate lighting provided. RP54 9.14.7
Approved lighting for the location installed. 1910.307(b)(1), RP500 5.3, RP500 10.1-16
Derrick emergency escape line installed. RP54 6.10.1
Geronimo on-line and ready for immediate access and use. RP54 6.10.1
Emergency escape line adequately anchored, in a clear area away from the rig. RP54 6.10.1
Mud standpipe secured
Mudhose snubbed at both ends
Rotary beams and all braces are in good condition
Drilling line hung properly from spool to sub structure.
BOP pick up line hung properly up off ground.
Condition of BOP pick up line.

DRILL FLOOR AREA

Rotary floor in good condition
Rotary chain drive guarded. 1910.212(a)(1-3)
All unused floor holes covered. 1910.23(a)(8-9), RP54 9.1.1., RP54 9.3.20., RP54 9.3.21
Driller at or near controls. RP54 9.4.4
Weight indicator installed. RP54 9.10.1
Weight indicator visible to brake operator. RP54 9.10.3
Drillers controls properly labeled/identified
Pipe slips & Dies in good condition. RP54 9.9.2
Racking floor area in good condition
V-door gate or chain provided and in place. 1910.23(c)(1)
Air hoist line in good condition. RP9B 3.2.7
Air hoist line guide in operating condition
Air hoist line properly layed/wound on drum. RP9B 3.3.3
Air hoist line properly guarded. 1910.212(a)(1)
Cathead friction surface in good condition. RP54 9.5.1
Cathead line divider/grip in good condition
Catline not worn or kinked, if available. RP54 9.5.10
Spinning chain in good condition
Headache post in good condition. RP54 9.5.8
Anti-crown device ( Crown-o-matic) installed and operational. RP54 9.2.16. RP54 9.4.8
Drilling line in good condition. RP9B 3.3.3. RP9B 3.3.10
Sufficient wraps left on drum with blocks in down position. RP9B 3.3.10(b)
Drawworks properly guarded. RP54 9.4.2, RP54 9.6.4
Proper lay of drill line on reel. RP9B 3.3.10(b)
Drawworks Hydraulic or Hydromatic brakes
Drawworks brake linkage.
Adequate lighting provided. RP54 9.14.7
Appropriate lighting installed. 1910.307(b)(1), RP500 5.3, RP500 10.1-16
General housekeeping. RP54 6.5.1, 1910.22(a)(1)
Minimum 2 exits from drill floor doghouse. 1910.36(b)(1)
First aid kit available in drill floor doghouse and properly stocked. 1910.151(b)
Guardrails installed along open edges of drill floor. RP54 9.3.17. 1910.23(c)(1)

POWER AND HAND TOOLS

Tong body & jaws in good condition. RP54 9.9.7
Tong snubbing lines in good condition. RP54 9.9.6
Tong snubbing line clamps in good condition and installed properly.
Tong vertical support line clamps in good condition and installed properly. RP9B 3.7.4
Tong dies sharp. RP54 9.9.7
Tong die keeper used. RP54 9.9.7
Condition of tong jerk line(s) RP54 9.9.6
Condition of hand tools. RP54 6.8.6
Hand tools stored properly
Bench grinder wheels properly guarded. 1910.215(b)
Bench grinder rest spacing – 1/8” from wheel. 1910.215(b)(4)
Electrical extension cords properly insulated. RP54 9.14.5. 1910.305(g)(2)(ii)
Plugs of electrical extension cords in good condition. RP54 9.14.5. 1910.304(f)(4) 1910.305(g)(2)(iii)

HOISTING TOOLS, HOOKS, BAILS, ELEVATORS AND OTHER RELATED EQUIPMENT

Traveling blocks in good condition. RP54 9.7.1
Traveling blocks properly guarded. RP54 9.7.4
Sheave guards in good condition
Bales and/or links in good condition. RP54 9.7.1
Elevators in good condition. RP54 9.7.1. RP54 9.7.8
Hoisting hook equipped with safety latch or equiv. RP54 9.7.3
Circulating hose secured to gooseneck and swivel. RP54 9.7.7

STAIRS, LADDERS, HANDRAILS & GUARDRAILS

Adequate stairs provided off rig. RP54 9.3.10. 1910.24(b)
No obstructions. RP54 9.3.11
Adequate handrails provided on stairs with 4 or more risers. RP54 9.3.8. 1910.24(h)
Stair treads of uniform size. RP54 9.3.9. 1910.24(d)
Stair treads not damaged. RP54 9.3.11
Guardrails, Midrails, & Toeboards installed along all open side edges of floors, platforms, etc, 4ft above ground level. 1910.23(c)(1) RP54 9.3.17

CONFINED SPACES, EXCAVATIONS & HAZARDOUS ENVIRONMENTS

All site personnel notified of the presence H2S, SO2, or other hazardous gases. RP54 6.7.1, RP49 11.1, RP68 12.1
Confined Space location warning signs erected. 1910.146(c)(2), 1910.145(c)(2)(i)
Inspected by
Reviewed with
Select date

Robinson Rig Inspection

Go digital today!

Convert your paper checklists into digital forms

DRILL SITE

PPE & GENERAL SAFETY

MUD PUMP AREA

MUD MIXING AREA

MUD TANKS AND PITS

GENERATOR AND ELECTRICAL SYSTEMS

FIRE PROTECTION

FUEL & OTHER FLAMMABLE LIQUID STORAGE TANKS & NON-FLAMMABLE STORAGE TANK

PIPE RACK AREA

BLOW-OUT PREVENTERS

DERRICK & SUBSTRUCTURE

DRILL FLOOR AREA

POWER AND HAND TOOLS

HOISTING TOOLS, HOOKS, BAILS, ELEVATORS AND OTHER RELATED EQUIPMENT

STAIRS, LADDERS, HANDRAILS & GUARDRAILS

CONFINED SPACES, EXCAVATIONS & HAZARDOUS ENVIRONMENTS

Related checklists

Robinson Rig Inspection

Free Robinson Rig Inspection Checklist

Go digital today!

Convert your paper checklists into digital forms

DRILL SITE

PPE & GENERAL SAFETY

​MUD PUMP AREA

MUD MIXING AREA

MUD TANKS AND PITS

GENERATOR AND ELECTRICAL SYSTEMS

FIRE PROTECTION

FUEL & OTHER FLAMMABLE LIQUID STORAGE TANKS & NON-FLAMMABLE STORAGE TANK

​PIPE RACK AREA

​BLOW-OUT PREVENTERS

DERRICK & SUBSTRUCTURE

​DRILL FLOOR AREA

​POWER AND HAND TOOLS

HOISTING TOOLS, HOOKS, BAILS, ELEVATORS AND OTHER RELATED EQUIPMENT

STAIRS, LADDERS, HANDRAILS & GUARDRAILS

CONFINED SPACES, EXCAVATIONS & HAZARDOUS ENVIRONMENTS

Related checklists

MUD PUMP AREA

PIPE RACK AREA

BLOW-OUT PREVENTERS

DRILL FLOOR AREA

POWER AND HAND TOOLS