Information
-
Audit Title
-
Document No.
-
Client / Site
-
Conducted on
-
Prepared by
-
Location
-
Personnel
Personal Protective Equipment (PPE) Required
-
Add media
Safety Notes
-
Electrical appliances must carry a currant inspection test tag
-
Electrical appliances must only be used on circuits protected by a residual current device (RCD)
-
Do not use appliance if any parts are damaged or missing
-
Do not insert metal objects or fingers into the appliances with exposed heating elements or microwave ovens
-
Do not touch hot surfaces
-
Do not stand appliance in water during use
-
Do not "piggyback" double adapters - use suitable power board
-
Do not unplug power plugs by pulling the lead. Pull on the plug only
Risk
-
Electrical shock
-
Fire
-
Damage to appliance
-
Burns
Planning
-
Appliances should be positioned on a level surface with sufficient space to work safely
Prestart Checks
-
Ensure current test tag is attached to power lead
-
Unplug machine before carrying out maintenance
-
Check casings for damage, cracks and missing screws and controls
-
Inspect appliance for missing parts and replace before returning to service
-
Test controls of appliance
-
Ensure that a d handles and grips are fitted firmly
-
Keep appliances and electrical leads away form water
-
Do not overload the power board
-
Ensure guards are fitted to the fans
-
Provide hard wired smoke detector in areas where appliances are used
Operation
-
Only use appliances for their intended purpose
-
Keep hands clear of hot surfaces and moving parts
-
Keep combustible materials away from heaters and heated air outlets
-
Always grasp lead by the plug to remove keep leads off the floor where they will be walked over
-
Follow manufacturers instructions when using appliances
Completion
-
Leave appliance in a safe clean and tidy area
NO SIGNATURE/NO START
-
Add signature
-
Add signature
-
Add signature
-
Add signature
-
Add signature
-
Add signature
-
Add signature
-
Add signature
-
Add signature
-
Add signature