Information
-
Location
-
Conducted on
-
Name & SESA Number of first person audited:
-
Customer Name:
-
SE Business
- Buildings
- Energy
- Industry
- IT
- Partner
- Smart Infrastructure
- Solar
- All Business (Execution Centre)
-
Auditors Names:
-
Type of Auditors
- Field Employee Supervisor
- Service Manager
- Business Leader
- Country President/SVP
- Customer
- Safety Department
-
Describe the work being completed:
At the vehicle
-
1. 1. Is the vehicle documentation, and required markings present and valid?
-
1. 2. Is the vehicle content secure and barriers in place?
-
1. 3. Identify any other vehicle safety equipment (high-vis vests, accident triangle, first aid etc.)
-
1. 4. Is the vehicle content organized?
-
1. 5. Identify the general PPE available to the Auditee:
- Helmet
- Eye protection
- Hearing protection
- Respiratory protection
- Mechanical gloves
- Chemical gloves
- High visibility clothing
- Safety footwear
- Cold weather protection
- Other.
-
1. 6. Identify the electrical PPE available to the Auditee:
- Electrical insulated gloves less 1000V
- Electrical insulated gloves greater 1000V
- Arc flash clothing Cat 0
- Arc flash face shield Cat 2
- Balaclava Cat 2
- Arc flash gloves Cat 2
- Arc flash clothing Cat 2
- Arc flash hood Cat 4
- Arc flash clothing Cat 4
- Other. Please give details below in 1.7
-
1. 7. Details of other PPE available:
BEFORE STARTING WORK- PLANNING FOR EMERGENCIES
-
2. 1. Is the Auditee aware of the Fire & Medical emergency procedures?
-
2. 2. Has the Auditee confirmed with the customer the location of all devices that will isolate the electrical energy in the event of an emergency?
DOCUMENTATION & TRAINING
-
3. 3. Has the Auditee received training on the product they are working on?
-
3. 4. Has the Auditee received safety training in the previous 12 months?
-
3. 5. (If more than one person are carrying out work) Has the person in charge been identified on the documentation?
-
3. 6. Explain the tasks being performed detailing key hazards and voltages?
INSPECT EQUIPMENT
-
4. 1. Has the FE inspected his/her tools & equipment?
-
4. 2. Are the tools in good working order (Insulation not damaged)
-
4. 3. Specific Tools - Leads have only 4mm exposed / Box cutters have auto retractable blades
-
5. 1. Is the environment safe? Lighting adequate, guards in place, overhead hazards controlled, chemicals controlled, slip trip fall hazards removed?
-
5. 2. Is the employee wearing appropriate PPE for the hazards identified? (i.e. Mechanical gloves, hearing protection, etc.)
-
5. 3. Are adequate measures in place to prevent unauthorized access to the work area?
WORKING AT HEIGHTS
-
6. Working at heights<br><br>6. 1. Does the access equipment used comply with GSD 10-Guidance-Document-Ladders? <br>
-
6. 2. Is a safety harness used if required when working at height?
-
6. 3. Are people working below protected?
-
6. 4. Has scaffolding been inspected & tagged by a competent person?
GENERAL WORK
-
5. 1. Is the environment safe? Lighting adequate, guards in place, overhead hazards controlled, chemicals controlled, slip trip fall hazards removed?<br><br>
-
5. 2. Is the employee wearing appropriate PPE for the hazards identified? (i.e. Mechanical gloves, hearing protection, etc.)
-
5. 3. Are adequate measures in place to prevent unauthorized access to the work area?
SAFETY MANAGEMENT & COMMUNICATION
-
10. 1. When was the last safety audit by the Auditee's manager or delegate?
-
10. 2. Describe the actions taken following the last audit:
-
10. 3. How many times did the Auditee receive safety communication in the previous 12 months?
-
10. 4. How does the Auditee access safety information?
- Safety Meetings
- E-mail from my Manager
- E-mail from others
- SERE Intranet
- Local Intranet
- Newsletter
- Safety on SPICE
- Other
-
10. 6. If a near miss has been reported, is the Auditee satisfied with the preventative action taken?
-
10. 7. What has prevented the Auditee from being fully compliant?
CONCLUSIONS
-
Record any non-compliances to procedures here:
-
Signed by
