Information

  • Document No.

  • Airport

  • Conducted on

  • Observer

  • Loader Operator

Pre-Operational Safety Check/Start-up

  • Check unit is serviceable; No obvious leaks; All lights working

  • Start up and checks e-stops are working

  • Follows travel path and drives at slow speed

5 Metre Stop

  • Does a 5m stop at the outer edge of the wing tip

  • Demonstrates FOOT on the BRAKE

2 Metre stop

  • Does a 2m stop and places foot on the brake

  • Selects neutral and engages park brake

  • Raises FWD Bridge to correct height

  • Park Brake off and gear to FWD and CREEPS into A/C

  • Selects neutral and engages park brake prior to starting load/unload

Reversing from Hold

  • Checks the travel path is clear of obstacles before moving

  • Checks proximity to canoe fairing/static wick when reversing at rear hold

  • When reversing from front hold - reverses away with left hand down ONLY

  • Travels at crawl speed

Procedures

  • Waits for LS to check locks before starting the on-load

  • Gets yellow copy before starts on load

  • Before reversing waits for LS to check locks once on-load done

  • Safe Behaviours observed/actions taken to encourage safe behaviour

  • Unsafe Behaviours observed/action taken to correct and prevent re-occurence

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.