SBM Joinery Installation ITC Rev B

• Project

• Unit Number

• Conducted on

  Date

• Conducted by

• Document No.

First Fix

• Type of Inspection - Measurement

• Cabinets are installed to correct RLs or nominated heights

  Yes

  No

  N/A

• Type of Inspection - Measurement

• Independent/free standing cabinets are installed to correct locations <br>(Check dimensions are parallel to opposing floor cabinets and line of sight to floor finishes)

  Yes

  No

  N/A

• Type of Inspection - Mechanical

• All cabinets are securely fixed to the floor/wall

  Yes

  No

  N/A

• Type of Inspection - Measurement

• Cabinets are plumb/level - plus or minus 2mm

  Yes

  No

  N/A

• Type of Inspection - Visual

• Service penetrations are neatly cut or covered with flanges

  Yes

  No

  N/A

• Type of Inspection - Visual

• All fillets/infills are installed

  Yes

  No

  N/A

• Type of Inspection - Visual

• All shadow fillets are installed and caulked (if applicable)

  Yes

  No

  N/A

• Type of Inspection - Visual/Tactile

• Rebates of multiple cabinets align to accommodate recess lighting

  Yes

  No

  N/A

• Type of Inspection - Measurement

• There is sufficient clearance between recess lighting and wall linings

  Yes

  No

  N/A

• Type of Inspection - Measurement

• Electrical cables have been pulled through cabinets in the correct locations

  Yes

  No

  N/A

• Type of Inspection - Visual

• Finished panels are protected with coreflute, corner moulds or similar

  Yes

  No

  N/A

Final Fix

• Type of Inspection - Visual/Tactile

• Cabinet doors and drawer fronts are aligned and not “lipping”

  Yes

  No

  N/A

• Type of Inspection - Visual/Measurement

• Cabinet door and drawer fronts have consistent gaps no greater than 2 mm

  Yes

  No

  N/A

• Type of Inspection - Visual

• Benchtops, splashbacks and wall unit end panels align

  Yes

  No

  N/A

• Type of Inspection - Visual

• Integrated appliance panels have been fitted and adjusted

  Yes

  No

  N/A

• Type of Inspection - Visual

• All kickboards have been fitted

  Yes

  No

  N/A

• Type of Inspection - Visual

• All end panels have been fitted

  Yes

  No

  N/A

• Type of Inspection - Measurment

• Benchtops have equal perimeter overhangs

  Yes

  No

  N/A

• Type of Inspection - Visual

• All cabinetry hardware has been installed

  Yes

  No

  N/A

• Type of Inspection - Visual

• All cabinetry accessories has been installed. eg Cutlery drawers

  Yes

  No

  N/A

• Type of Inspection - Visual

• All internal shelving has been installed

  Yes

  No

  N/A

• Type of Inspection - Visual

• All dot bumper stickers has been installed

  Yes

  No

  N/A

• Type of Inspection - Mechanical

• Drawer units slide freely

  Yes

  No

  N/A

• Type of Inspection - Mechanical

• Doors close freely

  Yes

  No

  N/A

• Type of Inspection - Visual

• Screw heads are capped

  Yes

  No

  N/A

• Type of Inspection - Visual

• All cabinetry is free of marks, chips, protruding screws, excessive glue etc.

  Yes

  No

  N/A

• Type of Inspection - Visual

• Cabinets are swept or wiped out of excess dust or wood chips

  Yes

  No

  N/A

• Type of Inspection - Visual

• Finished cabinets and benchtops are suitably protected with core-flute, corner moulds or similar

  Yes

  No

  N/A

• Additional Notes

• Add signature

  Sign