Title Page
-
Conducted on
-
Prepared by
-
Location
-
Office Name
-
Truck #
-
1. Inspect Transmission for Water, Drain Water off, Replace Annually<br>
-
Was vehicle was placed into service?
-
Why was vehicle placed into service before maintenance or repair was completed?
-
2. Inspect Right Angle Drive for Water, Drain Water off, Replace Annually
-
Was vehicle was placed into service?
-
Why was vehicle placed into service before maintenance or repair was completed?
-
3. Inspect Hydraulic Tank for Water
-
Was vehicle was placed into service?
-
Why was vehicle placed into service before maintenance or repair was completed?
-
4. Check and Adjust Clutch (Operation & Maintenance Manual)<br>
-
Was vehicle was placed into service?
-
Why was vehicle placed into service before maintenance or repair was completed?
-
5. Adjust Rotary Head Chain and Sprocket (Operation & Maintenance Manual)<br>
-
Was vehicle was placed into service?
-
Why was vehicle placed into service before maintenance or repair was completed?
-
6. Check Mast Sheaves & Bushings for wear
-
Was vehicle was placed into service?
-
Why was vehicle placed into service before maintenance or repair was completed?
-
7. Inspect all Hydraulic Hoists for proper level of gear oil
-
Was vehicle was placed into service?
-
Why was vehicle placed into service before maintenance or repair was completed?
-
8. Ensure all Hydraulic Hoist Brakes are functioning properly
-
Was vehicle was placed into service?
-
Why was vehicle placed into service before maintenance or repair was completed?
-
9. Drain Fuel
-
Was vehicle was placed into service?
-
Why was vehicle placed into service before maintenance or repair was completed?
-
10. Ensure Engine Govenor is functioning properly
-
Was vehicle was placed into service?
-
Why was vehicle placed into service before maintenance or repair was completed?
-
11. Inspect Feed Frame for Stress Cracks in Plate or Welds
-
Was vehicle was placed into service?
-
Why was vehicle placed into service before maintenance or repair was completed?
-
12. Inspect A-frame and Engine Mounts for Stress Cracks in Plate or Welds
-
Was vehicle was placed into service?
-
Why was vehicle placed into service before maintenance or repair was completed?
-
13. Inspect all Deck Areas and Hydraulic Jacks for Stress Cracks in Plate or Welds
-
Was vehicle was placed into service?
-
Why was vehicle placed into service before maintenance or repair was completed?
-
14. Ensure that both Channel Cross Members between Rear Hydraulic Jacks have not been distorted from original condition<br>
-
Was vehicle was placed into service?
-
Why was vehicle placed into service before maintenance or repair was completed?
-
15. Visually Inspect Mast for Cracks at Welded Joints
-
Was vehicle was placed into service?
-
Why was vehicle placed into service before maintenance or repair was completed?
-
16. Cathead does not have more than 1/8” wear groove
-
Was vehicle was placed into service?
-
Why was vehicle placed into service before maintenance or repair was completed?
-
17. Kelly Drive Square
-
Was vehicle was placed into service?
-
Why was vehicle placed into service before maintenance or repair was completed?
Approvals
-
Maintenance Performed by
