Title Page
-
Conducted on
-
Prepared by
-
Job number .
-
Site address
-
Assessors name
TEST PAPER ( supervisor level )
-
Employees name
-
Photo
MODULE 1 Types , uses & risks of ACMs
Question 1. Asbestos should not be found in buildings built ?
-
A. Before 1979
-
B. After 1979
-
C. Before 1989
-
D. After 1999
Question 2. Some types of asbestos fibres are hydrophobic. This means they ?
-
A. Are lighter than hydrogen,so take a long time to settle
-
B. Soak up water to make a gel
-
C. Dissolve in water making removal easier
-
D. Repel water
Question 3. What is the typical asbestos content of an asbestos cement sheet ?
-
A. 2-5%
-
B. 10-15%
-
C. 20-40%
-
D. 50-70%
Question 4. Crocidolite is the correct name for ?
-
A. Blue asbestos
-
B. Brown asbestos
-
C. Grey asbestos
-
D. White asbestos
Question 5. Someone who smokes and is significantly exposed to asbestos is ?
-
A. 2 times more likely to contract lung cancer
-
B. 5 times more likely to contract lung cancer
-
C. 53 times more likely to contract lung cancer
-
D 103times more likely to contract lung cancer
MODULE 2. Health hazards of asbestos
Question 1. After undertaking personal monitoring for asbestos work , what must you do with the results ?
-
A. Let the staff concerned know the results
-
B. Take no further action
-
C. Throw them away
-
D. Let the HSE know if they are high
Question 2. The legal duty to arrange and pay for medical examinations of asbestos workers rests with the ?
-
A. Workers themselves
-
B. Workers doctor
-
C. HSE
-
D. Employer
Question 3. Under the Control of Asbestos Regulations 2012 , personal health records should be kept for a minimum of ?
-
A. 10 years
-
B. 5 years
-
C. 30 years
-
D. 40 years
Question 4. If an asbestos worker contracts an asbestos-related disease, he can sue for compensation through ?
-
A. Health & Safety at work act
-
B. Civil law
-
C. Criminal law
-
D. Contract law
Question 5. Exposure to asbestos fibres is best prevented by ?
-
A. Avoiding disturbing it
-
B. Removing asbestos wet
-
C. Using RPE
-
D. Using H type class vacuum cleaners
MODULE 3. Legislation
Question 1. What percentage of asbestos does the total weight of waste produced need to contain before it is classified as hazardous waste ?
-
A. Greater than 0.1%
-
B. Greater than 1.0%
-
C. Greater than 2.0%
-
D. Greater than 2.5%
Question 2. A minimum level of negative pressure for a removal enclosure is ?
-
A. 0.5Pa
-
B. 5Pa
-
C. 10Pa
-
D. 5Kpa
Question 3. Under the Control of Asbestos Regulations 2012 , checks on full and proper use of control measures should be made at least ?
-
A. Daily
-
B. Weekly
-
C. Monthly
-
D. Yearly
Question 4. Who does the Control of Asbestos Regulations 2012 apply to ?
-
A. Employees only
-
B. Employers only
-
C. Employees & Employers
-
D. None of above
Question 5. The Control of Asbestos Regulations 2012 places a responsibility on employers to reduce the exposure of workers to asbestos dust to ?
-
A. Below the control limit
-
B. By containment within an enclosure and by the provision of RPE
-
C. As far as reasonably practicable and in all cases below the Control limit
-
D. Below the Control limit at all times
MODULE 14. Fault - finding
Question 1. What action would you take if the water supply to the DCU frozen at the start of the shift ?
-
A. Start work and tell the outside man to defrost the line
-
B. No action needed as supervisor only checks the DCU daily
-
C. Do not start work until the DCU is working correctly
-
D. Send all staff home for the day
Question 2. When monitoring for effective injection process ?
-
A. Needles should usually be 10-15cm apart
-
B. Needles should usually be 15-30cm apart
-
C. Needles should usually be 30-40cm apart
-
D. Needles should usually be 40-50 cm apart
Question 3. When checking new respirators they should be ?
-
A. Marked CD
-
B. Marked CE
-
C. Marked CV
-
D. Marked CT
Question 4 How do you ensure that the ACM is throughly wetted before starting to remove it ?
-
A. Wait for one hour after inspection has taken place
-
B. Take a core sample and check for saturation
-
C. Wait until you see signs of leakage of surfactant from the ACM
-
D. Wait until you see a change of colour of the ACM
Question 5. Viewing panels on enclosures should be a ?
-
A. Minimum 600mm x 300mm and taped on the outside
-
B. Minimum of 600mm x 300mm and taped on the inside
-
C. Minimum of 600mm x 300mm and taped on both sides
-
D. None of the above
MODULE 15. Roles & responsibilities
Question 1 Where a prohibition notice is issued by the HSE it means that ?
-
A. All work associated with that particular job must stop immediately
-
B. The supervisor can complete the section of the job he is working on
-
C. Contact can be completed but meeting to be arranged with HSE
-
D. The work specifically related to the prohibition notice must stop immediately
Question 2. If the work is going to be finished earlier than expected, when should you inform the HSE
-
A. After the weekend
-
B. When you get back to the office
-
C. Immediately
-
D. After you leave site
Question 3. Supervisors should perform ?
-
A. Regular toolbox talks on any changes to the work conditions or reinforce best practices
-
B. Driving licence checks as required by the DVLA for all new staff
-
C. Medical checks on operatives before they begin work in a live enclosure
-
D. Facefit tests on operatives before they can begin work in a live enclosure
Question 4. You finish building the enclosure on Friday afternoon and intend to start removal on Monday morning. When do you do the smoke test
-
A. Friday afternoon
-
B Saturday morning
-
C. Sunday morning
-
D. Monday morning
Question 5. A personal monitoring result records 6F/cm3 . The operatives were in the enclosure for 4 Hours wearing full face powered respirators and conditions were probably the throughout that period . What can we say about this ?
-
A. Exposure was 6 fibre Hours / cm3
-
B. Exposure was 12 fibre Hours / cm3
-
C. The law was broken
-
D. Exposure was 24 fibre Hours / cm3
MODULE 17. Management systems & monitoring
Question 1. For what period of time should personal health records be retained ?
-
A. 40 years
-
B. Until end of employment
-
C. 5 years
-
D. 2 years
Question 2. Prior to starting routine licence asbestos work what key requirement would firstly be required ?
-
A. The equipment is working and there is a plan of work produced
-
B. The site is supervised
-
C. The work was notified to the relevant enforcing authority 14 days in advance ?
-
D. All of the above
Question 3. It is important to ensure that performance of NPU’s is achieved what is the required efficiency ?
-
A. 99.898% efficiency
-
B. 99.998% efficiency
-
C. 99.987% efficiency
-
D. 99.997% efficiency
Question 4. How often should H type vacuums cleaners be inspected and recorded when in use ?
-
A. Yearly
-
B. Six monthly
-
C. Fortnightly
-
D. Daily
Question 5. What is the main purpose of a COSSH assessment ?
-
A. To let the client know what hazardous substances are on site to assist in keeping their register updated ?
-
B. To help in assessing the fire risks
-
C. To provide information for the HSE should they visit site ?
-
D. To ensure that all users of the hazardous substances are aware of the risk and what precautions to take
MODULE 19. Information, instruction & training
Question 1. Before sending any asbestos staff for refresher training the following must be given to the training provider
-
A. A training needs analysis
-
B. Valid insurance certificate
-
C. Copy of asbestos licence
-
D. Employee training records
Question 2. Training for licence work must be refreshed every year , but.?
-
A. As long as the course is booked in the next month it is ok.
-
B. You can still build enclosures if your training is out of date
-
C. No buts
-
D. This does not apply to people from outside Europe
Question 3. Copies of training certificates must be kept ?
-
A. Verified copies on site at all times
-
B. Kept with the HSE until needed
-
C. Displayed on the office wall
-
D. At home
Question 4. When new equipment / work methods are introduced for asbestos removal ?
-
A. Issue the equipment with the manual, they will manage
-
B. Do nothing , there is no need to train as Regulations don’t require you to
-
C. Give them a sales brochure and they can work it out themselves
-
D. Ensure all staff are trained to use the equipment properly
Question 5. What I am taught in training is not what my company does . What do I do ?
-
A. Complain to my trainer
-
B. Complain to my manager
-
C. Do as I was told in training
-
D. Follow my plan of work
OFFICE USE ONLY
-
Assessment for module 1
-
Assessment for module 2
-
Assessment for module 3
-
Assessment for module 14
-
Assessment for module 15
-
Assessment for module 17
-
Assessment for module 19